Belkin F7D4302

Default SSID: Belkin.XXXX (6 addl. devices)
, Belkin.XXXX_5GHz (2 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 297 additional devices
of which 99 are Belkin devices

Manuf/OEM/ODM

Arcadyan WG8017 F22

3rd Party Firmware Support

DD-WRT • (List)
, Tomato (Toastman) • (List | DLs)
, FreshTomato • (List | DLs)

Retail

FCC approval date

23 February 2010

(Est.) release date

24 March 2010

UPC

722868757383
(UPC DB, On eBay)

ASIN

B003CJTNLI

Country of manuf

China

Radio 1

Chip1

Broadcom BCM4718A1

Wireless interface OUI

94:44:52

Antenna Connector Type

none specified

MIMO status

2x2:2

Wireless Standard

IEEE 802.11b/g/n

802.11n

up to 300 Mbps

802.11g

up to 54 Mbps

802.11b

up to 11 Mbps

WiFi Operating Frequency

2.4 GHz

Radio cor_rev

Radio 2

Chip1

Broadcom BCM43224

Wireless interface OUI

94:44:52

Antenna Connector Type

U.FL

MIMO status

2x2:2

Wireless Standard

IEEE 802.11a/n

802.11n

up to 300 Mbps

802.11a

up to 54 Mbps

WiFi Operating Frequency

5 GHz

Radio cor_rev

	FCC ID
Belkin F7D8302	K7SF7D4302V1

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Belkin device with specifications, see Belkin.

• 300 Mbps - 2SS 5GHz 802.11n (40MHz chan.),

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AN600 class

Overview

"P/N: 141701620001J REV: 01" is silkscreened on the board.

The same hardware is used by the F7D8302 (mention on DD-WRT forums).

The default SSIDs are Belkin.XXXX and Belkin.XXXX_5GHz where XXXX appears to 5 followed by the last three hex digits of the wireless interface MAC address (though this could be incorrect). An example SSID set of SSIDs are Belkin.5BB8 and Belkin.5BB8_5GHz with MAC 94:44:52:25:4B:B8.

Links of Interest

On the DD-WRT forums (internal shots)
Eko's initial support of partial support for the F7D4301 and most major thread for the device

Supports DD-WRT Kong Mod (main Kong Mod thread)

On the TomatoUSB forum

This device seems to be working fine with the latest Toastman builds (as of 12/2012).

Flashing

NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power.

Flashing dd-wrt

Supported by dd-wrt as of = v24 SP2 K2.6 15230

better use CFE mini Web Server for first flash.

Please insert instructions here

Flashing Tomato

Please insert instructions here

USB Info

DD-WRT USB

The USB port is where you can connect an external USB hard drive or flash drive. Which can do a multitude of things. You can use in as a NAS, storage for a FTP server, use Optware to run external programs like torrent software, samba for sharing files to network, share a USB printer with network... The list of possibilities is long, it just takes a little research.