
You do not need an accout to report a problem with the wiki.
-
Netgear WNR1000v3/Serial info
From TechInfoDepot
Jump to navigationJump to searchInfo derived from
boot log • >> |
---|
Decompressing...done Decompressing...done CFE for WNR1000v3 version: 3.0.6 Build Date: Thu Jan 21 22:38:48 CST 2010 Boot partition size = 131072(0x20000) Found a 4MB ST compatible serial flash et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.56.46 Device eth0: hwaddr C0-3F-0E-F0-FF-0C, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set CPU ProcId is: 0x00019749, options: 0x000021cd Primary instruction cache 32kb, linesize 32 bytes (4 ways) Primary data cache 32kb, linesize 32 bytes (4 ways) Linux version 2.4.20 (zacker@svn) (gcc version 3.2.3 with Broadcom modifications) #1 Fri Jul 16 18:22:57 CST 2010 Found a 4MB ST compatible serial flash Determined physical RAM map: memory: 01000000 @ 00000000 (usable) On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200 CPU: BCM5356 rev 1 at 333 MHz Calibrating delay loop... 166.29 BogoMIPS Memory: 14312k/16384k available (1408k kernel code, 2072k reserved, 108k data, 60k init, 0k highmem) Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) Inode cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX PCI: no core PCI: Fixing up bus 0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xb8000300 (irq = 8) is a 16550A PPP generic driver version 2.4.2 sflash: squash filesystem with lzma found at block 706 Creating 10 MTD partitions on "sflash": 0x00000000-0x00020000 : "boot" 0x00020000-0x003c8000 : "linux" 0x000b0ae0-0x003c8000 : "rootfs" 0x003c8000-0x003d8000 : "ML1" 0x003d8000-0x003e8000 : "ML2" 0x003e8000-0x003f0000 : "T_Meter1" 0x003f0000-0x003f8000 : "T_Meter2" 0x003f8000-0x003f9000 : "POT" 0x003f9000-0x003fa000 : "board_data" 0x003fa000-0x00400000 : "nvram" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 2048) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k freed Reading board data... WSC UUID: 0xbf346fbfd4f68bc83e785dc9560e7f3a NTP synchronized date/time: Sat Aug 20 23:40:59 2011 MAC address of 1st STA connected: 00-21-63-1E-D2-23 Using /lib/modules/2.4.20/kernel/drivers/net/emf/emf.o Using /lib/modules/2.4.20/kernel/drivers/net/igs/igs.o Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o Hit enter to continue...WARNING: console log level set to 1 killall: upnp: no process killed UPnP daemon is ready to run killall: wps_monitor: no process killed killall: wps_ap: no process killed killall: wps_enr: no process killed Reading board data... WSC UUID: 0xbf346fbfd4f68bc83e785dc9560e7f3a Using /lib/modules/2.4.20/kernel/net/ipv4/acos_nat/acos_nat.o info, udhcp server (v0.9.8) started error, unable to parse 'option wins ' error, unable to parse 'option domain ' POT integrity check OK. POT time is up. IOCTL_AG_REGION_SET: English Start DHCP client daemon info, udhcp client (v0.9.8) started vlan1: No such process Hit enter to continue...Info: No FWPT default policies. Using /lib/modules/2.4.20/kernel/net/ipv4/multissidcontrol/MultiSsidControl.o httpd: socket bound in 192.168.1.1:80. |