Netgear WNR1000v3
From TechInfoDepot
Jump to navigationJump to searchbgn (N150) | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wireless-N 150 Router | |||||||||||||||||||||||||
| Support | |||||||||||||||||||||||||
| Wikipedia | |||||||||||||||||||||||||
| InfoDepot Wiki | |||||||||||||||||||||||||
| WikiDevi.wi-cat.ru | |||||||||||||||||||||||||
| 3rd Party Firmware | |||||||||||||||||||||||||
| dd-wrt |
Not Supported | ||||||||||||||||||||||||
| OpenWrt | |||||||||||||||||||||||||
| Tomato any flavor |
Incompatible | ||||||||||||||||||||||||
| Gargoyle |
Status Unknown | ||||||||||||||||||||||||
| Platform | |||||||||||||||||||||||||
| Brand • Model • Rev |
Netgear WNR1000v3 | ||||||||||||||||||||||||
| FCC ID | |||||||||||||||||||||||||
| IC ID | |||||||||||||||||||||||||
| Type |
wireless router | ||||||||||||||||||||||||
| CPU1 |
Broadcom BCM5356A1 | ||||||||||||||||||||||||
| CPU1 Type |
MIPS 74K | ||||||||||||||||||||||||
| CPU1 Speed |
333 MHz | ||||||||||||||||||||||||
| Flash1 Chip |
Macronix MX25L3205DM2I-12G | ||||||||||||||||||||||||
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Serial) | ||||||||||||||||||||||||
| RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||||||||||||||||||||||
| RAM1 Chip |
ISSI IC42S16800E-6TL | ||||||||||||||||||||||||
| ETH chip1 |
Broadcom BCM5356A1 | ||||||||||||||||||||||||
| Switch |
Broadcom BCM5356A1 | ||||||||||||||||||||||||
| Ethernet Port Count |
1-100MbE-WAN 1-100MbE-LAN | ||||||||||||||||||||||||
| Wired Standard |
IEEE 802.3/3u | ||||||||||||||||||||||||
| Stock bootloader |
CFE 3.0.6 vendor modified | ||||||||||||||||||||||||
| Stock FW OS |
Linux 2.4.20 | ||||||||||||||||||||||||
| Expansion IF types |
none specified | ||||||||||||||||||||||||
| Power |
12 VDC, 1 A | ||||||||||||||||||||||||
| Connector type |
barrel | ||||||||||||||||||||||||
| Serial Port (UART) |
yes, internal, unpopulated, 6-pin header, (115200 8N1), 3.3V TTL, J3 | ||||||||||||||||||||||||
| JTAG Port |
yes | ||||||||||||||||||||||||
| Other | |||||||||||||||||||||||||
|
Default SSID: NETGEAR (43 addl. devices) | |||||||||||||||||||||||||
| Manuf/OEM/ODM |
Foxconn U12H139 .99 | ||||||||||||||||||||||||
| 3rd Party Firmware Support | |||||||||||||||||||||||||
| Retail | |||||||||||||||||||||||||
| Availability | End of Life | ||||||||||||||||||||||||
| FCC approval date | 16 November 2009 | ||||||||||||||||||||||||
| Country of manuf | China, Vietnam | ||||||||||||||||||||||||
| Physical | |||||||||||||||||||||||||
| Dimensions |
28 x 175 x 118 mm (1.1 x 6.9 x 4.7 in) | ||||||||||||||||||||||||
| Radio 1 | |||||||||||||||||||||||||
| Chip1 |
Broadcom BCM5356A1 | ||||||||||||||||||||||||
| Wireless interface OUI |
20:4E:7F, 30:46:9A, 84:1B:5E, C0:3F:0E, E0:91:F5 | ||||||||||||||||||||||||
| Antenna Connector Type |
none specified | ||||||||||||||||||||||||
| MIMO status |
1x1:1 | ||||||||||||||||||||||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||||||||||||||
| 802.11n |
up to 150 Mbps | ||||||||||||||||||||||||
| 802.11g |
up to 54 Mbps | ||||||||||||||||||||||||
| 802.11b |
up to 11 Mbps | ||||||||||||||||||||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||||||||||||||||||||
| Radio cor_rev |
21 | ||||||||||||||||||||||||
| |||||||||||||||||||||||||
| |||||||||||||||||||||||||
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Netgear device with specifications, see Netgear.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
"U12H139T99" and "Rev.0 GP" is silkscreened on the boards.
- The same hardware is also used for the Netgear WGR614v10.
OUIs may include 20:4E:7F, 84:1B:5E OUI
same HW as WGR614 v10 Netgear WGR614v10
Links of Interest
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
| OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
| Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: bcm47xx
OpenWrt Subtarget: mips74k
OpenWrt Package architecture: mipsel_74kc
Support started version: 17.01.0
Current supported version: 22.03.7
Unsupported Functions:
WiFi 2.4GHz
On the OpenWrt Wiki
OpenWrt Target: bcm47xx
OpenWrt Subtarget: mips74k
OpenWrt Package architecture: mipsel_74kc
Support started version: 17.01.0
Current supported version: 22.03.7
Unsupported Functions:
WiFi 2.4GHz
Please insert instructions here
JTAG-Serial Info
Serial
Serial Pinouts
(GND) (TxD) (...) (...) (RxD) (+3.3v)
o o o o o o
6 5 4 3 2 1
J3
Info derived from
| boot log • >> |
|---|
Decompressing...done Decompressing...done CFE for WNR1000v3 version: 3.0.6 Build Date: Thu Jan 21 22:38:48 CST 2010 Boot partition size = 131072(0x20000) Found a 4MB ST compatible serial flash et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.56.46 Device eth0: hwaddr C0-3F-0E-F0-FF-0C, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set CPU ProcId is: 0x00019749, options: 0x000021cd Primary instruction cache 32kb, linesize 32 bytes (4 ways) Primary data cache 32kb, linesize 32 bytes (4 ways) Linux version 2.4.20 (zacker@svn) (gcc version 3.2.3 with Broadcom modifications) #1 Fri Jul 16 18:22:57 CST 2010 Found a 4MB ST compatible serial flash Determined physical RAM map: memory: 01000000 @ 00000000 (usable) On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200 CPU: BCM5356 rev 1 at 333 MHz Calibrating delay loop... 166.29 BogoMIPS Memory: 14312k/16384k available (1408k kernel code, 2072k reserved, 108k data, 60k init, 0k highmem) Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) Inode cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX PCI: no core PCI: Fixing up bus 0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xb8000300 (irq = 8) is a 16550A PPP generic driver version 2.4.2 sflash: squash filesystem with lzma found at block 706 Creating 10 MTD partitions on "sflash": 0x00000000-0x00020000 : "boot" 0x00020000-0x003c8000 : "linux" 0x000b0ae0-0x003c8000 : "rootfs" 0x003c8000-0x003d8000 : "ML1" 0x003d8000-0x003e8000 : "ML2" 0x003e8000-0x003f0000 : "T_Meter1" 0x003f0000-0x003f8000 : "T_Meter2" 0x003f8000-0x003f9000 : "POT" 0x003f9000-0x003fa000 : "board_data" 0x003fa000-0x00400000 : "nvram" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 2048) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k freed Reading board data... WSC UUID: 0xbf346fbfd4f68bc83e785dc9560e7f3a NTP synchronized date/time: Sat Aug 20 23:40:59 2011 MAC address of 1st STA connected: 00-21-63-1E-D2-23 Using /lib/modules/2.4.20/kernel/drivers/net/emf/emf.o Using /lib/modules/2.4.20/kernel/drivers/net/igs/igs.o Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o Hit enter to continue...WARNING: console log level set to 1 killall: upnp: no process killed UPnP daemon is ready to run killall: wps_monitor: no process killed killall: wps_ap: no process killed killall: wps_enr: no process killed Reading board data... WSC UUID: 0xbf346fbfd4f68bc83e785dc9560e7f3a Using /lib/modules/2.4.20/kernel/net/ipv4/acos_nat/acos_nat.o info, udhcp server (v0.9.8) started error, unable to parse 'option wins ' error, unable to parse 'option domain ' POT integrity check OK. POT time is up. IOCTL_AG_REGION_SET: English Start DHCP client daemon info, udhcp client (v0.9.8) started vlan1: No such process Hit enter to continue...Info: No FWPT default policies. Using /lib/modules/2.4.20/kernel/net/ipv4/multissidcontrol/MultiSsidControl.o httpd: socket bound in 192.168.1.1:80. |
