IpTIME NAS1dual
From TechInfoDepot
Jump to navigationJump to searchNAS | |||||||||||||
Homepage | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3rd Party Firmware | |||||||||||||
dd-wrt |
Status Unknown | ||||||||||||
OpenWrt | |||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||
Gargoyle |
Status Unknown | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev |
ipTIME NAS1dual | ||||||||||||
Type |
NAS | ||||||||||||
CPU1 |
Marvell 88F6820 | ||||||||||||
CPU1 Type |
ARMv7 Cortex-A9 | ||||||||||||
CPU1 Speed |
1.6 GHz ( 2 cores ) | ||||||||||||
Flash1 Chip |
Brand? Model? | ||||||||||||
Flash1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | ||||||||||||
RAM1 Size |
2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> | ||||||||||||
RAM1 Chip |
Brand? Model? | ||||||||||||
ETH chip1 |
Brand? Model? | ||||||||||||
Ethernet Port Count |
2-1GbE-LAN | ||||||||||||
Wired Standard |
IEEE 802.3i/3u/3ab | ||||||||||||
| |||||||||||||
Expansion IF types |
USB 3.0, SATA | ||||||||||||
Serial Port (UART) |
yes, 3.3, (115200 8N1) | ||||||||||||
Other | |||||||||||||
| |||||||||||||
3rd Party Firmware Support | |||||||||||||
|
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented ipTIME device with specifications, see ipTIME.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
OpenWrt Target: mvebu
OpenWrt Subtarget: cortexa9
OpenWrt Package architecture: arm_cortex-a9_vfpv3
Support started version: 22.03.0
Current supported version: 23.05.5
OpenWrt Target: mvebu
OpenWrt Subtarget: cortexa9
OpenWrt Package architecture: arm_cortex-a9_vfpv3
Support started version: 22.03.0
Current supported version: 23.05.5
Please insert instructions here