ipTIME NAS1
From TechInfoDepot
Jump to navigationJump to searchNetwork-attached storage | |||||||||||||
3rd Party Firmware | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
dd-wrt |
Status Unknown | ||||||||||||
OpenWrt | |||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||
Gargoyle |
Status Unknown | ||||||||||||
Platform | |||||||||||||
Brand • Model • Rev |
ipTIME NAS1 | ||||||||||||
Type |
NAS | ||||||||||||
CPU1 |
Marvell 88F6281 | ||||||||||||
CPU1 Type |
ARMv5 | ||||||||||||
CPU1 Speed |
not specified | ||||||||||||
Flash1 Chip |
Brand? Model? | ||||||||||||
Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (SPI NOR) | ||||||||||||
RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> | ||||||||||||
RAM1 Chip |
Brand? Model? | ||||||||||||
ETH chip1 |
Marvell 88F6281 | ||||||||||||
Ethernet Port Count |
1-1GbE-LAN | ||||||||||||
Wired Standard |
IEEE 802.3i/3u/3ab | ||||||||||||
| |||||||||||||
Stock bootloader |
U-Boot | ||||||||||||
Expansion IF types |
USB 2.0 | ||||||||||||
USB ports |
1 | ||||||||||||
USB Hub Compatible |
Untested | ||||||||||||
Serial Port (UART) |
yes, (115200 8N1) | ||||||||||||
Other | |||||||||||||
| |||||||||||||
3rd Party Firmware Support | |||||||||||||
|
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented ipTIME device with specifications, see ipTIME.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
OpenWrt Target: kirkwood
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_xscale
Support started version: 22.03.0
Current supported version: 23.05.5
OpenWrt Target: kirkwood
OpenWrt Subtarget: generic
OpenWrt Package architecture: arm_xscale
Support started version: 22.03.0
Current supported version: 23.05.5
Please insert instructions here