Belkin F5D7235-4/Serial info

dd-wrt boot log

CFE version 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: Thu Apr 29 19:10:32 CST 2004 (denny@dnylinux) Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. Initializing Arena. Initializing Devices. et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.9.0 CPU type 0x29007: 200MHz Total memory: 0x1000000 bytes (16MB) Total memory used by CFE: 0x80300000 - 0x80434EA0 (1265312) Initialized Data: 0x8032EFB0 - 0x803312E0 (9008) BSS Area: 0x803312E0 - 0x80332EA0 (7104) Local Heap: 0x80332EA0 - 0x80432EA0 (1048576) Stack Area: 0x80432EA0 - 0x80434EA0 (8192) Text (code) segment: 0x80300000 - 0x8032EFB0 (192432) Boot area (physical): 0x00435000 - 0x00475000 Relocation Factor: I:00000000 - D:00000000 Device eth0: hwaddr 00-11-50-9D-A2-6B, ipaddr 192.168.2.1, mask 255.255.255.0 gateway not set, nameserver not set Reading :: Done. 3284992 bytes read [flash1.trx] : Programming...done. 3284992 bytes written boardcase upgrade status to client: upgrade success Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: .. 3920 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000

Tomato boot log

CFE version 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: Thu Apr 29 19:10:32 CST 2004 (denny@dnylinux) Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. Initializing Arena. Initializing Devices. et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.9.0 CPU type 0x29007: 200MHz Total memory: 0x1000000 bytes (16MB) Total memory used by CFE: 0x80300000 - 0x80434EA0 (1265312) Initialized Data: 0x8032EFB0 - 0x803312E0 (9008) BSS Area: 0x803312E0 - 0x80332EA0 (7104) Local Heap: 0x80332EA0 - 0x80432EA0 (1048576) Stack Area: 0x80432EA0 - 0x80434EA0 (8192) Text (code) segment: 0x80300000 - 0x8032EFB0 (192432) Boot area (physical): 0x00435000 - 0x00475000 Relocation Factor: I:00000000 - D:00000000 Device eth0: hwaddr 00-11-50-9D-A2-6B, ipaddr 192.168.2.1, mask 255.255.255.0 gateway not set, nameserver not set I/O error Reading :: Done. 3706880 bytes read [flash1.trx] : Programming...Failed.: Unknown error boardcase upgrade status to client: upgrade failure Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: ...... 1646592 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 CPU revision is: 00029007 Primary instruction cache 8kb, linesize 16 bytes (2 ways) Primary data cache 4kb, linesize 16 bytes (2 ways) Linux version 2.4.20 (root@tomato) (gcc version 3.2.3 with Broadcom modification s) #3 Tue Mar 3 23:35:36 EST 2009 Determined physical RAM map: memory: 01000000 @ 00000000 (usable) On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200 CPU: BCM4712 rev 1 at 200 MHz Calibrating delay loop... 199.47 BogoMIPS Memory: 14380k/16384k available (1414k kernel code, 2004k reserved, 108k data, 6 4k init, 0k highmem) Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) Inode cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX PCI: Initializing host PCI: Fixing up bus 0 PCI: Fixing up bridge PCI: Fixing up bus 1 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 squashfs: version 3.0 (2006/03/15) Phillip Lougher pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-0Cool with MANY_PORTS SHARE_IRQ SERIAL_PCI en abled ttyS00 at 0xb8000300 (irq = 3) is a 16550A ttyS01 at 0xb8000400 (irq = 0) is a 16550A HDLC line discipline: version $Revision: 1.1.1.4 $, maxframe=4096 N_HDLC line discipline registered. PPP generic driver version 2.4.2 Amd/Fujitsu Extended Query Table v1.3 at 0x0040 number of CFI chips: 1 Flash device: 0x400000 at 0x1c000000 Creating 5 MTD partitions on "Physically mapped flash": 0x00000000-0x00020000 : "pmon" 0x00020000-0x003f0000 : "linux" 0x000b94bc-0x001f0000 : "rootfs" 0x001f0000-0x003f0000 : "jffs2" 0x003f0000-0x00400000 : "nvram" sflash: found no supported devices NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 1024 bind 2048) Linux IP multicast router 0.06 plus PIM-SM ip_conntrack version 2.1 (16384 buckets, 8192 max) - 368 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> Kernel panic: VFS: Unable to mount root fs on 1f:02

US firmware good boot log

CFE version 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: Thu Apr 29 19:10:32 CST 2004 (denny@dnylinux) Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. Initializing Arena. Initializing Devices. et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.9.0 CPU type 0x29007: 200MHz Total memory: 0x1000000 bytes (16MB) Total memory used by CFE: 0x80300000 - 0x80434EA0 (1265312) Initialized Data: 0x8032EFB0 - 0x803312E0 (9008) BSS Area: 0x803312E0 - 0x80332EA0 (7104) Local Heap: 0x80332EA0 - 0x80432EA0 (1048576) Stack Area: 0x80432EA0 - 0x80434EA0 (8192) Text (code) segment: 0x80300000 - 0x8032EFB0 (192432) Boot area (physical): 0x00435000 - 0x00475000 Relocation Factor: I:00000000 - D:00000000 Device eth0: hwaddr 00-11-50-9D-A2-6B, ipaddr 192.168.2.1, mask 255.255.255.0 gateway not set, nameserver not set Reading :: Failed.: Timeout occured Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: ..... 1474560 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 CPU revision is: 00029007 Primary instruction cache 8kb, linesize 16 bytes (2 ways) Primary data cache 4kb, linesize 16 bytes (2 ways) Linux version 2.4.20 (lchen@penguin.askey.com) (gcc version 3.2.3 with Broadcom modifications) #16 Mon Sep 13 17:29:59 PDT 2004 Determined physical RAM map: memory: 01000000 @ 00000000 (usable) On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200 CPU: BCM4712 rev 1 at 200 MHz Calibrating delay loop... 199.47 BogoMIPS Memory: 14536k/16384k available (1245k kernel code, 1848k reserved, 108k data, 6 4k init, 0k highmem) Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) Inode cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX PCI: Fixing up bus 0 PCI: Fixing up bridge PCI: Fixing up bus 1 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-0Cool with MANY_PORTS SHARE_IRQ SERIAL_PCI en abled ttyS00 at 0xb8000300 (irq = 3) is a 16550A ttyS01 at 0xb8000400 (irq = 0) is a 16550A PPP generic driver version 2.4.2 Amd/Fujitsu Extended Query Table v1.3 at 0x0040 number of CFI chips: 1 Flash device: 0x400000 at 0x1c000000 Physically mapped flash: cramfs filesystem found at block 869 Creating 5 MTD partitions on "Physically mapped flash": 0x00000000-0x00020000 : "pmon" 0x00020000-0x003c0000 : "linux" 0x000d94bc-0x003c0000 : "rootfs" 0x003c0000-0x003e0000 : "profile" 0x003e0000-0x00400000 : "nvram" sflash: found no supported devices NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 2048) ip_conntrack version 2.1 (128 buckets, 1024 max) - 344 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_time loading NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (cramfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 64k freed Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o Using /lib/modules/2.4.20/kernel/drivers/net/led/led.o Hit enter to continue...Set name-type for VLAN subsystem. Should be visible in / proc/net/vlan/config Added VLAN with VID == 0 to IF -:eth0:- Added VLAN with VID == 1 to IF -:eth0:- WARNING: VLAN 1 does not work with many switches, consider another number if you have problems. killall: iappd: no process killed iappd: No such file or directory info, Moreton Bay DHCP Server (v0.9.5) started ===wan_ifname=vlan1, ifname=vlan1 killall: upnp: no process killed info, Moreton Bay DHCP Client (v0.9.5) started No interface specified. Quitting... No interface specified. Quitting... Hit enter to continue...debug, Sending select for 192.168.1.139... info, Lease of 192.168.1.139 obtained, lease time 86400 row_size(): Can't open /tmp/log_web exlog(): Loged message(WAN DHCP Client Connected IP 192.168.1.139) into /tmp/log _web.lck directly start_wan_done(): start_firewall br0: No such process vlan1: No such process none pppoe killall: dnsmasq: no process killed send_decoy: pathnag=te.cgi re_website=HTTP/1.1 200 OK <html> <script> newwindow=window.open("http://filter.belkin.com/setup.asp?SN=BEL21PVT&RP=21483&I P=192.168.1.139&FV=0.00.07","NAGreminder","toolbar=yes,location=yes,directories= no,status=no,menubar=no,scrollbars=yes,width=795,height=600,resizable=0"); newwindow.focus(); location="http://192.168.1.1/update.cgi"; </script> </html> Hit enter to continue...led_mon(): System is ready(1), WAN is ready(1), quit! Hit enter to continue...killall: ntpclient: no process killed BusyBox v0.60.0 (2004.09.14-00:09+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands. # #

NVRAM values

CFE> dnvram show pptp_netmask= wl0_frameburst=on m_wan_ipaddr= log_tftp_server= pptp_ipaddr= default_lan_dhcp_client_br=0 *hw_model=F5D7235-4 %serial_no=BEL21PVT *user_conf_ver=1.01 ip_filter=0 pppoe_keepalive=1 ceb_timeout=10 default_lan_netmask_br=255.255.255.0 mac_filter=0 restore_defaults=0 bpa_state= *boardflags=0x0318 default_policy=0 wan_lease=864000 fw_reset=0 http_wanport=80 lan_gateway=192.168.2.1 wl0_ifname=eth2 timer_interval=3600 pptp_username= pppoe_mtu=1454 ceb_nag=1 fwi= udp_filter=0 wan_gateway=0.0.0.0 wl0_mode=ap dhcp_start=192.168.2.2 *os_version=0.00.07 fw_id= default_lan_ipaddr_br=192.168.2.254 dhcp_end=192.168.2.100 user_time_hr=0 wl0_gmode=6 dhcp_lease=0 login_timeout=10 fwt= NatFlag=1 fwu= *et0phyaddr=30 stats_server= static_route= lan_netmask=255.255.255.0 wl0_ssid=belkin54g wl0_dtim=3 http_username= user_time_yr=1970 fwi_des= http_lanport=80 remote_config_ip= wan_ping=1 wan_hwname=et1 wan_domain= ceb_email_enable=1 wan_netmask=0.0.0.0 wl0_key1=F wl0_key2= wl0_key3= wl0_key4= firewall_enable=1 pptp_conn_id= fw_auto_detect=0 log_tftp=0 http_wan_enable=0 http_passwd= bpa_passwd= wl0_closed=0 wl0_rate=0 wl0_macmode=disabled wl0_phytype=g wl0_lazywds=0 pppoe_auth_mode=auto *et1phyaddr=0 wan_dns= *iappd_oid=00:30:bd m_wan_moreip= pppoe_idletime_min=5 wl0_wpa_psk= *fw_src=http://networking.belkin.com/update/files/usa/giga/54g_router.html os_server= wan_proto=dhcp wl0_unit=0 *lan_stp=0 *wl0_country_code=US pppoe_autodns=1 ntp_enable=1 *kernel_mods=et wl bpa_username= wl0_wds= m_wan_hostname= filter_enable=1 log_level=0 dhcp_dns= ntp_server=192.43.244.18 m_wan_gateway= *fw_magic=0x02063200 pptp_idle_disconnect= lan_dns= pppoe_ifname=eth1 wl0_auth=0 wl0_radius_port=1812 wl0_radius_ipaddr= wl0_psk_obscure= pa0maxpwr=60 *device_type=1 wan_ifnames= dos_enable=1 m_wan_domain=Belkin m_lan_netmask=255.255.255.0 m_wan_wins= os_name=linux lan_proto=dhcp lan_ipaddr=192.168.2.1 default_lan_proto_nat=dhcp wl0_phytypes=g wl0_wep=off wl0_frag=2346 m_wan_aliasip= pppoe_passwd= %il0macaddr=00:11:50:9D:A2:6C m_wan_netmask= sdram_config=0x0000 wl0_wep_mode=0 dmz_ipaddr= %et0macaddr=00:11:50:9D:A2:6B wl0_wep64_manual=1 ntp_dst_enabled=1 wl0_rateset=default pppoe_servicename= user_time_dd=1 pppoe_idletime=300 lan_ifname=br0 m_wan_dns= sdram_refresh=0x8040 lan_dhcp_client=0 sdram_ncdl=0x00000000 default_lan_gateway=192.168.2.1 fg= ntp_timezone=5 fi= fj= pptp_idle_interval= wan_ipaddr=0.0.0.0 fm= wl0_rts=2347 default_lan_ipaddr=192.168.2.1 wan_wins= ft= ceb_unavail_block=1 default_lan_dhcp_client_nat=0 wl0_ibss=1 fu= pppoe_username= ntp_sync_interval=1 pptp_password= wl0_wpa_gtk_rekey=900 pppoe_dns= wl0_key=1 user_time_mn=0 user_time_mo=1 console_loglevel=1 time_zone=PST8PDT bpa_server= bpa_manual_enable= default_lan_netmask=255.255.255.0 %et1macaddr=00:11:50:9D:A2:6B wan_ifname=eth1 *belkin_router=1 *language=English wan_hostname= wl0_radio=1 wl0_wep128_manual=1 pptp_server_ipaddr= user_time_update=0 wl0_bcn=100 wl0_hwaddr= BridgeFlag=0 wl0_gmode_protection=auto *lan_ifnames=eth0 eth2 wl0_maclist= sdram_init=0x0419 lan_hwnames=et0 il0 wl0 wl1 pppoe_demand=0 m_lan_ipaddr=192.168.2.1 wl0_radius_key= tcp_filter=0 wl0_channel=11 pppoe_mru=1454 upnp_enable=0 m_autodns=1 default_lan_proto_br=static wl0_auth_mode=disabled internal_policy=1 route_check_host=heartbeat.belkin.com dhcp_autodns=1 size: 3345 bytes (4847 left) *** command status = 0