Belkin F5D7235-4

From TechInfoDepot
Jump to navigationJump to search
bg (G125)
High-Speed Mode Wireless G Router with Gigabit Switch
Belkin F5D7235-4.jpg
Wikipedia
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Incompatible
Tomato any flavor
Incompatible
Platform
BrandModelRev
Belkin F5D7235-4
FCC ID
IC ID
Type
wireless router
CPU1
CPU1 Type
MIPS BMIPS3300
CPU1 Speed
200 MHz
Flash1 Chip
Spansion S29GL032A
Flash1 Size
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
RAM1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip
ESMT Model? x 2
ETH chip1
Switch
Broadcom B5011A1KQM
Ethernet Port Count
1-WAN
4-1GbE-LAN
Wired Standard
IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Expansion IF types
none specified
Power
5 VDC, 2 A
Connector type
barrel
Other
Manuf/OEM/ODM
Askey RT2005G-D56
Retail
FCC approval date 01 February 2005
Radio 1
Chip1
Chip2
Broadcom BCM2050
Wireless interface OUI
none specified
Antenna Connector Type
none specified
Wireless Standard
IEEE 802.11b/g
802.11g
up to 125 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio cor_rev
7

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Belkin device with specifications, see Belkin.

125 Mbps - 2.4GHz 802.11g = G125 class


Links of Interest

JTAG-Serial Info

Serial

dd-wrt boot log
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Thu Apr 29 19:10:32 CST 2004 (denny@dnylinux)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.9.0
CPU type 0x29007: 200MHz
Total memory: 0x1000000 bytes (16MB)

Total memory used by CFE: 0x80300000 - 0x80434EA0 (1265312)
Initialized Data: 0x8032EFB0 - 0x803312E0 (9008)
BSS Area: 0x803312E0 - 0x80332EA0 (7104)
Local Heap: 0x80332EA0 - 0x80432EA0 (1048576)
Stack Area: 0x80432EA0 - 0x80434EA0 (8192)
Text (code) segment: 0x80300000 - 0x8032EFB0 (192432)
Boot area (physical): 0x00435000 - 0x00475000
Relocation Factor: I:00000000 - D:00000000

Device eth0: hwaddr 00-11-50-9D-A2-6B, ipaddr 192.168.2.1, mask 255.255.255.0
gateway not set, nameserver not set
Reading :: Done. 3284992 bytes read
[flash1.trx] : Programming...done. 3284992 bytes written
boardcase upgrade status to client: upgrade success

Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3920 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Tomato boot log
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Thu Apr 29 19:10:32 CST 2004 (denny@dnylinux)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.9.0
CPU type 0x29007: 200MHz
Total memory: 0x1000000 bytes (16MB)

Total memory used by CFE: 0x80300000 - 0x80434EA0 (1265312)
Initialized Data: 0x8032EFB0 - 0x803312E0 (9008)
BSS Area: 0x803312E0 - 0x80332EA0 (7104)
Local Heap: 0x80332EA0 - 0x80432EA0 (1048576)
Stack Area: 0x80432EA0 - 0x80434EA0 (8192)
Text (code) segment: 0x80300000 - 0x8032EFB0 (192432)
Boot area (physical): 0x00435000 - 0x00475000
Relocation Factor: I:00000000 - D:00000000

Device eth0: hwaddr 00-11-50-9D-A2-6B, ipaddr 192.168.2.1, mask 255.255.255.0
gateway not set, nameserver not set
I/O error
Reading :: Done. 3706880 bytes read
[flash1.trx] : Programming...Failed.: Unknown error
boardcase upgrade status to client: upgrade failure

Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: ...... 1646592 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029007
Primary instruction cache 8kb, linesize 16 bytes (2 ways)
Primary data cache 4kb, linesize 16 bytes (2 ways)
Linux version 2.4.20 (root@tomato) (gcc version 3.2.3 with Broadcom modification
s) #3 Tue Mar 3 23:35:36 EST 2009
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
CPU: BCM4712 rev 1 at 200 MHz
Calibrating delay loop... 199.47 BogoMIPS
Memory: 14380k/16384k available (1414k kernel code, 2004k reserved, 108k data, 6
4k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Initializing host
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-0Cool with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 0) is a 16550A
HDLC line discipline: version $Revision: 1.1.1.4 $, maxframe=4096
N_HDLC line discipline registered.
PPP generic driver version 2.4.2
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of CFI chips: 1
Flash device: 0x400000 at 0x1c000000
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00020000 : "pmon"
0x00020000-0x003f0000 : "linux"
0x000b94bc-0x001f0000 : "rootfs"
0x001f0000-0x003f0000 : "jffs2"
0x003f0000-0x00400000 : "nvram"
sflash: found no supported devices
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (16384 buckets, 8192 max) - 368 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Kernel panic: VFS: Unable to mount root fs on 1f:02
US firmware good boot log
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Thu Apr 29 19:10:32 CST 2004 (denny@dnylinux)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.9.0
CPU type 0x29007: 200MHz
Total memory: 0x1000000 bytes (16MB)

Total memory used by CFE: 0x80300000 - 0x80434EA0 (1265312)
Initialized Data: 0x8032EFB0 - 0x803312E0 (9008)
BSS Area: 0x803312E0 - 0x80332EA0 (7104)
Local Heap: 0x80332EA0 - 0x80432EA0 (1048576)
Stack Area: 0x80432EA0 - 0x80434EA0 (8192)
Text (code) segment: 0x80300000 - 0x8032EFB0 (192432)
Boot area (physical): 0x00435000 - 0x00475000
Relocation Factor: I:00000000 - D:00000000

Device eth0: hwaddr 00-11-50-9D-A2-6B, ipaddr 192.168.2.1, mask 255.255.255.0
gateway not set, nameserver not set
Reading :: Failed.: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: ..... 1474560 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029007
Primary instruction cache 8kb, linesize 16 bytes (2 ways)
Primary data cache 4kb, linesize 16 bytes (2 ways)
Linux version 2.4.20 (lchen@penguin.askey.com) (gcc version 3.2.3 with Broadcom
modifications) #16 Mon Sep 13 17:29:59 PDT 2004
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
CPU: BCM4712 rev 1 at 200 MHz
Calibrating delay loop... 199.47 BogoMIPS
Memory: 14536k/16384k available (1245k kernel code, 1848k reserved, 108k data, 6
4k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-0Cool with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 0) is a 16550A
PPP generic driver version 2.4.2
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of CFI chips: 1
Flash device: 0x400000 at 0x1c000000
Physically mapped flash: cramfs filesystem found at block 869
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00020000 : "pmon"
0x00020000-0x003c0000 : "linux"
0x000d94bc-0x003c0000 : "rootfs"
0x003c0000-0x003e0000 : "profile"
0x003e0000-0x00400000 : "nvram"
sflash: found no supported devices
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
ip_conntrack version 2.1 (128 buckets, 1024 max) - 344 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 64k freed
Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o
Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o
Using /lib/modules/2.4.20/kernel/drivers/net/led/led.o
Hit enter to continue...Set name-type for VLAN subsystem. Should be visible in /
proc/net/vlan/config
Added VLAN with VID == 0 to IF -:eth0:-
Added VLAN with VID == 1 to IF -:eth0:-
WARNING: VLAN 1 does not work with many switches,
consider another number if you have problems.
killall: iappd: no process killed
iappd: No such file or directory
info, Moreton Bay DHCP Server (v0.9.5) started
===wan_ifname=vlan1, ifname=vlan1
killall: upnp: no process killed
info, Moreton Bay DHCP Client (v0.9.5) started
No interface specified. Quitting...
No interface specified. Quitting...
Hit enter to continue...debug, Sending select for 192.168.1.139...
info, Lease of 192.168.1.139 obtained, lease time 86400
row_size(): Can't open /tmp/log_web
exlog(): Loged message(WAN DHCP Client Connected IP 192.168.1.139) into /tmp/log
_web.lck directly
start_wan_done(): start_firewall
br0: No such process
vlan1: No such process
none pppoe
killall: dnsmasq: no process killed
send_decoy: pathnag=te.cgi
re_website=HTTP/1.1 200 OK
<html>
<script>
newwindow=window.open("http://filter.belkin.com/setup.asp?SN=BEL21PVT&RP=21483&I
P=192.168.1.139&FV=0.00.07","NAGreminder","toolbar=yes,location=yes,directories=
no,status=no,menubar=no,scrollbars=yes,width=795,height=600,resizable=0");
newwindow.focus();
location="http://192.168.1.1/update.cgi";
</script>
</html>


Hit enter to continue...led_mon(): System is ready(1), WAN is ready(1), quit!
Hit enter to continue...killall: ntpclient: no process killed





BusyBox v0.60.0 (2004.09.14-00:09+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.

#
#
NVRAM values
CFE> dnvram show
pptp_netmask=
wl0_frameburst=on
m_wan_ipaddr=
log_tftp_server=
pptp_ipaddr=
default_lan_dhcp_client_br=0
*hw_model=F5D7235-4
%serial_no=BEL21PVT
*user_conf_ver=1.01
ip_filter=0
pppoe_keepalive=1
ceb_timeout=10
default_lan_netmask_br=255.255.255.0
mac_filter=0
restore_defaults=0
bpa_state=
*boardflags=0x0318
default_policy=0
wan_lease=864000
fw_reset=0
http_wanport=80
lan_gateway=192.168.2.1
wl0_ifname=eth2
timer_interval=3600
pptp_username=
pppoe_mtu=1454
ceb_nag=1
fwi=
udp_filter=0
wan_gateway=0.0.0.0
wl0_mode=ap
dhcp_start=192.168.2.2
*os_version=0.00.07
fw_id=
default_lan_ipaddr_br=192.168.2.254
dhcp_end=192.168.2.100
user_time_hr=0
wl0_gmode=6
dhcp_lease=0
login_timeout=10
fwt=
NatFlag=1
fwu=
*et0phyaddr=30
stats_server=
static_route=
lan_netmask=255.255.255.0
wl0_ssid=belkin54g
wl0_dtim=3
http_username=
user_time_yr=1970
fwi_des=
http_lanport=80
remote_config_ip=
wan_ping=1
wan_hwname=et1
wan_domain=
ceb_email_enable=1
wan_netmask=0.0.0.0
wl0_key1=F
wl0_key2=
wl0_key3=
wl0_key4=
firewall_enable=1
pptp_conn_id=
fw_auto_detect=0
log_tftp=0
http_wan_enable=0
http_passwd=
bpa_passwd=
wl0_closed=0
wl0_rate=0
wl0_macmode=disabled
wl0_phytype=g
wl0_lazywds=0
pppoe_auth_mode=auto
*et1phyaddr=0
wan_dns=
*iappd_oid=00:30:bd
m_wan_moreip=
pppoe_idletime_min=5
wl0_wpa_psk=
*fw_src=http://networking.belkin.com/update/files/usa/giga/54g_router.html
os_server=
wan_proto=dhcp
wl0_unit=0
*lan_stp=0
*wl0_country_code=US
pppoe_autodns=1
ntp_enable=1
*kernel_mods=et wl
bpa_username=
wl0_wds=
m_wan_hostname=
filter_enable=1
log_level=0
dhcp_dns=
ntp_server=192.43.244.18
m_wan_gateway=
*fw_magic=0x02063200
pptp_idle_disconnect=
lan_dns=
pppoe_ifname=eth1
wl0_auth=0
wl0_radius_port=1812
wl0_radius_ipaddr=
wl0_psk_obscure=
pa0maxpwr=60
*device_type=1
wan_ifnames=
dos_enable=1
m_wan_domain=Belkin
m_lan_netmask=255.255.255.0
m_wan_wins=
os_name=linux
lan_proto=dhcp
lan_ipaddr=192.168.2.1
default_lan_proto_nat=dhcp
wl0_phytypes=g
wl0_wep=off
wl0_frag=2346
m_wan_aliasip=
pppoe_passwd=
%il0macaddr=00:11:50:9D:A2:6C
m_wan_netmask=
sdram_config=0x0000
wl0_wep_mode=0
dmz_ipaddr=
%et0macaddr=00:11:50:9D:A2:6B
wl0_wep64_manual=1
ntp_dst_enabled=1
wl0_rateset=default
pppoe_servicename=
user_time_dd=1
pppoe_idletime=300
lan_ifname=br0
m_wan_dns=
sdram_refresh=0x8040
lan_dhcp_client=0
sdram_ncdl=0x00000000
default_lan_gateway=192.168.2.1
fg=
ntp_timezone=5
fi=
fj=
pptp_idle_interval=
wan_ipaddr=0.0.0.0
fm=
wl0_rts=2347
default_lan_ipaddr=192.168.2.1
wan_wins=
ft=
ceb_unavail_block=1
default_lan_dhcp_client_nat=0
wl0_ibss=1
fu=
pppoe_username=
ntp_sync_interval=1
pptp_password=
wl0_wpa_gtk_rekey=900
pppoe_dns=
wl0_key=1
user_time_mn=0
user_time_mo=1
console_loglevel=1
time_zone=PST8PDT
bpa_server=
bpa_manual_enable=
default_lan_netmask=255.255.255.0
%et1macaddr=00:11:50:9D:A2:6B
wan_ifname=eth1
*belkin_router=1
*language=English
wan_hostname=
wl0_radio=1
wl0_wep128_manual=1
pptp_server_ipaddr=
user_time_update=0
wl0_bcn=100
wl0_hwaddr=
BridgeFlag=0
wl0_gmode_protection=auto
*lan_ifnames=eth0 eth2
wl0_maclist=
sdram_init=0x0419
lan_hwnames=et0 il0 wl0 wl1
pppoe_demand=0
m_lan_ipaddr=192.168.2.1
wl0_radius_key=
tcp_filter=0
wl0_channel=11
pppoe_mru=1454
upnp_enable=0
m_autodns=1
default_lan_proto_br=static
wl0_auth_mode=disabled
internal_policy=1
route_check_host=heartbeat.belkin.com
dhcp_autodns=1
size: 3345 bytes (4847 left)
*** command status = 0