Banana Pi BPI P2 Zero (v1.0)
From TechInfoDepot
Jump to navigationJump to searchbgn (N150) | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Banana Pi BPI-P2 Zero SBC | |||||||||||||||||
| Homepage | |||||||||||||||||
| WikiDevi.wi-cat.ru | |||||||||||||||||
| 3rd Party Firmware | |||||||||||||||||
| dd-wrt |
Status Unknown | ||||||||||||||||
| OpenWrt | |||||||||||||||||
| Tomato any flavor |
Incompatible | ||||||||||||||||
| Gargoyle |
Status Unknown | ||||||||||||||||
| Platform | |||||||||||||||||
| Brand • Model • Rev |
Banana Pi BPI P2Zero (v1.0) | ||||||||||||||||
| FCC ID |
none specified | ||||||||||||||||
| Type |
single-board computer | ||||||||||||||||
| CPU1 |
Allwinner H2+ | ||||||||||||||||
| CPU1 Type |
ARM Cortex-A7 (v7-A) | ||||||||||||||||
| CPU1 Speed |
1.0 GHz ( 4 cores ) | ||||||||||||||||
| Flash1 Chip |
Samsung KLM8G1GEME-B041 | ||||||||||||||||
| Flash1 Size |
8 GiB 8,192 MiB <br />8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br /> | ||||||||||||||||
| RAM1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR3) | ||||||||||||||||
| RAM1 Chip |
SK hynix H5TQ4G63CFR-RDC | ||||||||||||||||
| ETH chip1 |
Allwinner H2+ | ||||||||||||||||
| Ethernet Port Count |
1-100MbE-LAN | ||||||||||||||||
| Wired Standard |
IEEE 802.3i/3u | ||||||||||||||||
|
802dot11 OUI: none specified | |||||||||||||||||
| Expansion IF types |
USB 2.0, Micro SD Card slot, Mini HDMI | ||||||||||||||||
| USB ports |
1 | ||||||||||||||||
| SD/MMC Slots |
1 | ||||||||||||||||
| HDMI |
1 | ||||||||||||||||
| USB Hub Compatible |
Untested | ||||||||||||||||
| Power |
5 VDC, 2 A | ||||||||||||||||
| Connector type |
USB (Micro-B) Female | ||||||||||||||||
| Serial Port (UART) |
yes, 3-pin header, unpopulated, 3.3V TTL, (115200 8N1) | ||||||||||||||||
|
Flags: Micro SD Card slot, Bluetooth 4.0 LE, Mini HDMI output, CSI, GPIO | |||||||||||||||||
| Other | |||||||||||||||||
|
| |||||||||||||||||
| Manuf/OEM/ODM | |||||||||||||||||
| 3rd Party Firmware Support | |||||||||||||||||
| Retail | |||||||||||||||||
| (Est.) release date | August 2018 | ||||||||||||||||
| (Est.) initial retail price (in USD): | $28 | ||||||||||||||||
| ASIN |
B0B9RLGH3Z  , multiple uses | ||||||||||||||||
| Country of manuf | China | ||||||||||||||||
| Radio 1 | |||||||||||||||||
| Radio1 module | |||||||||||||||||
| Radio1 module IF |
SDIO (module) | ||||||||||||||||
| Chip1 |
Broadcom BCM43430 | ||||||||||||||||
| Wireless interface OUI |
none specified | ||||||||||||||||
| Antenna Connector Type |
U.FL | ||||||||||||||||
| MIMO status |
1x1:1 | ||||||||||||||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||||||
| 802.11n |
up to 150 Mbps | ||||||||||||||||
| 802.11g |
up to 54 Mbps | ||||||||||||||||
| 802.11b |
up to 11 Mbps | ||||||||||||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||||||||||||
| |||||||||||||||||
For a list of all currently documented Allwinner SoC's with specifications, see Allwinner.
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Banana Pi device with specifications, see Banana Pi.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
Specifications
- Banana Pi BPI-P2 Zero board
- CPU: Allwinner H2+ @1.0GHz (H.265/HEVC)
- SoC: Quad-core ARM (Cortex-A7)
- GPU: Mali-400 MP2 @600MHz, OpenGL ES 2.0
- Memory: 512MB (DDR3) RAM (shared w/ GPU)
- Wi-Fi: AMPAK AP6212, BT 4.0,
- SDIO (option AP6181, AP6335)
- Network: 1x 10/100 Ethernet port
- USB: 1x USB 2.0 (OTG) port
- Audio outputs: HDMI Mini
- Video input: CSI input connector
- Camera: Supports 8-bit YUV422 CMOS sensor interface,
- Supports CCIR656 protocol for NTSC and PAL,
- Supports SM pixel camera sensor,
- Supports video capture solution up to 1080p @30fps
- Video outputs: Supports HDMI output with HDCP, CEC, 3D function,
- Integrated CVBS, Supports simultaneous output of HDMI and CVBS
- GPIO: 40x Pins header (compatible w/ Raspberry Pi B+)
- LED: Power led & Status led
- Power: 5V/2A via Micro USB
- OS: Android, Ubuntu
Links of Interest
- Banana Pi BPI-P2 Zero on Wikipedia
- Banana Pi BPI-P2 Zero on Banana Pi Wiki
- Banana Pi BPI-P2 Zero Board on CNX|Software
- Two new open-spec Banana Pi boards feature PoE on LinuxGizmos
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
| Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details. |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: sunxi
OpenWrt Subtarget: cortexa7
OpenWrt Package architecture: arm_cortex-a7_neon-vfpv4
Support started version: ?
Current supported version: snapshot
OpenWrt Target: sunxi
OpenWrt Subtarget: cortexa7
OpenWrt Package architecture: arm_cortex-a7_neon-vfpv4
Support started version: ?
Current supported version: snapshot
Please insert instructions here
See also
Models
- Banana Pi • >>
- Banana Pi BPI (2014) • Allwinner A20
- Banana Pi BPI 6202 (2023) • Allwinner A40i
- Banana Pi BPI F2 (2018) • Freescale i.MX6
- Banana Pi BPI F2P (2020) • Sunplus SP7021
- Banana Pi BPI F2S (2019) • Sunplus SP7021
- Banana Pi BPI F3 (2024) • SpacemiT K1
- Banana Pi BPI M1 (2014) • Allwinner A20
- Banana Pi BPI M1+ (2015) • Allwinner A20
- Banana Pi BPI M2 (2015) • Allwinner A31S
- Banana Pi BPI M2+ (2016) • Allwinner H3
- Banana Pi BPI M2 Berry (2016) • Allwinner V40
- Banana Pi BPI M2 Magic (2017) • Allwinner A33/R16
- Banana Pi BPI M2 Pro (2021) • Amlogic S905X3
- Banana Pi BPI M2S (2022) • Amlogic S922X/A311D
- Banana Pi BPI M2 Ultra (2016) • Allwinner R40
- Banana Pi BPI M2 Zero (2017) • Allwinner H2+
- Banana Pi BPI M3 (2015) • Allwinner A83T
- Banana Pi BPI M4 (2019) • Realtek RTD1395
- Banana Pi BPI M4 2G (2020) • Realtek RTD1395
- Banana Pi BPI M4 Berry (2023) • Allwinner H618
- Banana Pi BPI M4 Zero (2023) • Allwinner H618
- Banana Pi BPI M5 (2020) • Amlogic S905X3
- Banana Pi BPI M6 (2023) • Synaptics VS680
- Banana Pi BPI M7 (2023) • Rockchip RK3588
- Banana Pi BPI M64 (2016) • Allwinner A64
- Banana Pi BPI P2 Zero (2018) • Allwinner H2+
- Banana Pi BPI P2 Maker (2019) • Allwinner H2+
- Banana Pi BPI P2 Pro (2023) • Rockchip RK3308
- Banana Pi BPI Pro (2014) • Allwinner A20
- Banana Pi BPI R1 (2014) • Allwinner A20
- Banana Pi BPI R2 (2017) • MediaTek MT7623N
- Banana Pi BPI R2 Pro (2022) • Rockchip RK3568
- Banana Pi BPI R3 (2022) • MediaTek MT7986A
- Banana Pi BPI R3 Mini (2023) • MediaTek MT7986A
- Banana Pi BPI R4 (2023) • MediaTek MT7988A
- Banana Pi BPI R64 (2018) • MediaTek MT7622A
- Banana Pi BPI S64 (2018) • Actions Semi S700
- Banana Pi BPI W2 (2018) • Realtek RTD1296
- Banana Pi BPI W3 (2023) • Rockchip RK3588
Categories:
- Banana Pi
- Embedded system/single-board computer
- Embedded System Allwinner
- Embedded System H2+
- Allwinner
- Embedded System ARM
- Embedded System Cortex-A7 (v7-A)
- Manuf SinoVoIP
- OpenWrt Supported
- Embedded System Broadcom
- Embedded System BCM43430
- Broadcom
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Embedded System
- English Documentation
