ZCOM TG2521

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
wireless router
InfoDepot Wiki
3rd Party Firmware
dd-wrt
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Gargoyle
Status Unknown
Platform
BrandModelRev
Z-Com TG2521
FCC ID
none specified
Type
wireless router
CPU1
Atheros AR9130
CPU1 Type
MIPS rev 1
CPU1 Speed
400 MHz
Flash1 Chip
Brand? Model?
Flash1 Size
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip
Brand? Model?
ETH chip1
Brand? Model?
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3/3u
802.1q vlan
802.1Q VLAN Support v1.8 Ben Greear

802dot11 OUI: none specified

Expansion IF types
USB 1.0
USB ports
1
USB Hub Compatible
Untested
Power
12 VDC, 1 A
Other
3rd Party Firmware Support
DD-WRT • (List)
Physical
LEDs/Color
orange/green/blue
Dimensions
15cm x 19cm x 3cm
Radio 1
Chip1
Atheros AR9100
Wireless interface OUI
none specified
Antenna Connector Type
2x External fixed
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

For a list of all currently documented Z-Com device with specifications, see Z-Com.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Flashing

Flashing dd-wrt

Supported by dd-wrt as of = v.24 SP2 - build 13839 - 20100204

Please insert instructions here

JTAG-Serial Info

Serial

(Serial: 8250/16550 driver, 1 ports,)

USB Info

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 2.06
S: Manufacturer=Linux 2.6.34.7-svn15928 ehci_hcd
S: Product=Atheros AR91xx built-in EHCI controller
S: SerialNumber=platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

test with USB storage (USB pendrive 1G, 2G, 8G. HD 500GB) did not recognize. ERROR: (with several revisions dd-wrt) hub 1-0:1.0: unable to enumerate USB device on port 1