SAPIDO RB-1232

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
N+ Broadband Router - All Broadbands
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
SAPIDO RB-1232
FCC ID
none specified
Type
wireless router
CPU1
Realtek RTL8196BU
CPU1 Type
Lexra RLX
CPU1 Speed
390 MHz
Flash1 Chip
Macronix MX25L6445EM2I-10G
Flash1 Size
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip
ESMT M12L2561616A-6T
ETH chip1
Realtek RTL8196BU
Switch
Realtek RTL8196BU
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 00:D0:41 (1 E, 7 W)
Ethernet OUI: 00:D0:41 (1 E, 7 W)

Stock bootloader
rtkload
Stock FW OS
Linux
Expansion IF types
USB 2.0
USB ports
1
USB Hub Compatible
Untested
Power
5 VDC, 1.5 A
Connector type
barrel
Serial Port (UART)
yes, internal, 4-pin header, unpopulated, 3.3V TTL, (38400,8,N,1)
JTAG Port
yes
Other

Default SSID: SAPIDO_All_Broadband_Router
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1308 additional devices
of which 2 are SAPIDO devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1331 additional devices
of which 2 are SAPIDO devices

Manuf/OEM/ODM
E-TOP BR380n v3 <??>
Retail
(Est.) release date April 2010
Country of manuf Taiwan
Radio 1
Chip1
Realtek RTL8192SE
Wireless interface OUI
00:D0:41
Antenna Connector Type
RP-SMA
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

There appears to be a v1 and v2 of this device. I don't know what the difference between versions is..

"EPMBBR380NBXX3XX", "BR380n_MB_V30", and a date code of 1030 is silkscreened on the board of the particular unit populating this entry.

The default SSID of the wireless interface is SAPIDO_All_Broadband_Router. The default Universal Repeater Mode SSID is ESSID_SAPIDO_RB-1232. The default SSIDs for multi-SSID mode are Multiple_APX, where X is 1 through 4.

JTAG-Serial Info

Serial

Serial Pinouts

The pinout would appear to be the following...

T1
[3.3] (TxD) (RxD) (GND)


Boot log

========== SPI =============

---RealTek(RTL8196BU)at 2010.03.19-14:01+0800 version v1.4 [16bit](390MHz)
Jump to image start=0x80500000...
init started: BusyBox v1.8.2 (2010-08-20 09:42:30 CST)
693
HW configuration check OK!
DS configuration check OK!
CS configuration check OK!
BR380n
cat: can't open '/var/run/hsdpa.pid': No such file or directory
cat: can't open '/var/run/hsdpadial.pid': No such file or directory
You need to specify whom to kill
You need to specify whom to kill
Initialize wlan0 interface
Initialize wlan0-va0 interface
Initialize wlan0-va1 interface
Initialize wlan0-va2 interface
Initialize wlan0-va3 interface
Setup BRIDGE interface
cat: can't open '/etc/udhcpc/udhcpc-eth5.pid': No such file or directory
[: 0: unknown operand
killall: syslogd: no process killed
killall: klogd: no process killed
ifconfig: SIOCGIFFLAGS: No such device
bridge br0 doesn't exist; can't delete it
Setup bridge...
======buf_cache: add@/class/net/br0
route: SIOCDELRT: No such process
route: SIOCDELRT: No such process
route: SIOCDELRT: No such process
route: SIOCDELRT: No such process
route: SIOCDELRT: No such process
route: SIOCDELRT: No such process

WiFi Simple Config v1.14 (2010.08.20-01:43+0000).

route: SIOCDELRT: No such process
IEEE 802.11f (IAPP) using interface br0 (v1.7)
Setup WAN interface
killall: webs: no process killed
<init.sh> User select WAN Type order is <1>
killall: Autodetect: no process killed
To start miniigd

MiniIGD v1.07 (2010.08.20-01:44+0000).

<init.sh> WAN Type is Ethernet, Wireless select WPS or WDS Mode
====== init.sh END =======
2056
2057
2058
Password: Set web language to English


Notes

Included PSU(s)

The included power adapter for at least some units is a Channel Well Technology CAP008051.

Channel Well Technology CAP008051 (more)
Input: 100-240 VAC ~ 47-63 Hz, 0.25 A
 Input connector: NEMA 1-15P
Style: medium, horiz.  Eff. level: 5
Output: 5 VDC, 1.5 A
 Output connector: barrel (center +)
 OD: ??  ID: ??  LEN: ??