Ruckus Wireless MediaFlex 7211 (VF7211)

From TechInfoDepot
Jump to navigationJump to search
bgn (N150)
access point
Homepage
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
Ruckus Wireless MediaFlex 7211
FCC ID
IC ID
Type
access point
CPU1
Ralink RT3050
CPU1 Type
MIPS 24KEc
CPU1 Speed
320 MHz 16-bit
Flash1 Chip
STMicro Model?
Flash1 Size
? MiB
RAM1 Size
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip
Micron MT48LC8M16A2
ETH chip1
Ralink RT3050
Ethernet Port Count
1-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 74:91:1A (1 E, 1 W)
Ethernet OUI: 74:91:1A (1 E, 1 W)

Expansion IF types
none specified
Power
12 VDC, 1 A
Connector type
barrel
Other

Default SSID: V54-HOME001 (1 addl. devices)
, V54-HOME002
Default IP address: 192.168.30.1
the IP 192.168.30.1 is used by 2 additional devices
of which 0 are Ruckus Wireless devices
Default login user: super
Default login password: sp-admin
super:sp-admin credentials used by 16 additional devices
of which 16 are Ruckus Wireless devices

Retail
FCC approval date 09 April 2010
Country of manuf Malaysia
Radio 1
Chip1
Ralink RT3050
Wireless interface OUI
74:91:1A
Antenna Connector Type
none specified
MIMO status
1x1:1
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 150 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

For a list of all currently documented Ruckus Wireless device with specifications, see Ruckus Wireless.

150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

There are multiple sub-models of this device.

  • MediaFlex 7211 802.11n Outdoor Smart Wi-Fi Gateway (integral antenna)
  • MediaFlex 7211 802.11n Indoor/EXT Smart Wi-Fi Gateway (U.FL->RP-SMA connector on EXT models only)

The Ruckus Wireless logo, "GD 16", "Asm 120-11139["<written 002>"]Rev[ ]", and "Ser. No. ["<written 415>"]" is silkscreened on the board in the FCC photos.

"100-11138-001 REV 4" (or something) is on the component side of the board.

Per the manual, the default SSIDs for this device are V54-HOME001 (WIreless 1) and V54-HOME002 (Wireless 2).