RFNet APRT-2001g

From TechInfoDepot
Jump to navigationJump to search
bg (G54)
wireless router
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Platform
BrandModelRev
RFNet APRT-2001g
FCC ID
Type
wireless router
CPU1
Atheros AR2312A
CPU1 Type
MIPS 4Kc
CPU1 Speed
180 MHz
Flash1 Chip
Brand? Model?
Flash1 Size
? MiB
RAM1 Size
? MiB
RAM1 Chip
Brand? Model?
ETH chip1
Atheros AR2312A
Switch
Marvell 88E6060
Ethernet Port Count
1-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 00:06:C7
Ethernet OUI: 00:06:C7

Expansion IF types
none specified
Power
9 VDC, 1 A
Connector type
barrel
Flags:
block diagram

Additional chips
2.4GHz Power Amplifier IC;Microsemi;LX5510;;1;

Other

Default SSID: 11g (2 addl. devices)
Default IP address: 10.0.0.1
the IP 10.0.0.1 is used by 20 additional devices
of which 0 are RFNet devices

Retail
FCC approval date 04 February 2004
Radio 1
Chip1
Atheros AR2312A
Chip2
Atheros AR2112A
Wireless interface OUI
00:06:C7
Antenna Connector Type
RP-SMA
Wireless Standard
IEEE 802.11b/g
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.

For a list of all currently documented RFNet device with specifications, see RFNet.

54 Mbps - 2.4GHz 802.11g = G54 class

Overview

The i-connect AP880G and Aztech NA8300 would seem to use the same board as this device.

Default settings (including the SSID) are per the FCC manual.

A 00:06:C7 (RFNet) OUI is presumed to be used (it's shown on a MAC label affixed to the EUT) - there is support for it within WiGLE

The power supply shown in the external photos is an unbranded SY-0901 (120VAC ~ 60Hz, 150mA -> 9VDC, 1.0A).