Gateworks Avila GW2348-2
From TechInfoDepot
Jump to navigationJump to searchNetwork Computer | |||||||||||||||||
InfoDepot Wiki | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3rd Party Firmware | |||||||||||||||||
dd-wrt | |||||||||||||||||
OpenWrt |
Status Unknown | ||||||||||||||||
Tomato any flavor |
Incompatible | ||||||||||||||||
Gargoyle |
Status Unknown | ||||||||||||||||
Platform | |||||||||||||||||
Brand • Model • Rev |
Gateworks Avila GW2348-2 | ||||||||||||||||
Type |
single-board computer | ||||||||||||||||
CPU1 |
Intel XScale IXP420 | ||||||||||||||||
CPU1 Speed |
266 MHz | ||||||||||||||||
Flash1 Chip |
Brand? Model? | ||||||||||||||||
Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||||||||||||
RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||||||||||||||
RAM1 Chip |
Brand? Model? | ||||||||||||||||
ETH chip1 |
Brand? Model? | ||||||||||||||||
Ethernet Port Count |
1-100MbE-WAN 1-100MbE-LAN | ||||||||||||||||
Wired Standard |
IEEE 802.3/3u | ||||||||||||||||
| |||||||||||||||||
Expansion IF types |
Mini PCI | ||||||||||||||||
Mini PCI slots |
2 | ||||||||||||||||
Serial Port (UART) |
yes | ||||||||||||||||
JTAG Port |
yes | ||||||||||||||||
Flags: hardware watchdog, temp. and volt. sensor | |||||||||||||||||
Other | |||||||||||||||||
| |||||||||||||||||
3rd Party Firmware Support | |||||||||||||||||
|
For a list of all currently documented Intel XScale SoC's with specifications, see Intel XScale.
For a list of all currently documented Gateworks device with specifications, see Gateworks.
Links of Interest
- Gateworks Avila GW2348-2:
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
DD-WRT Activation Required. |
Supported by dd-wrt as of = gateworks-8M build 13637 20100116
Please insert instructions here
Flashing OpenWrt
Please insert instructions here