ZyXEL GS1900-16
| 16-Port Gigabit Ethernet Smart Managed Switch | |
 | |
| Homepage | |
|---|---|
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
ZyXEL GS1900-16 V2.30 (AAxx.0)C0 |
| CPU1 |
Realtek RTL8382M |
| CPU1 Type |
MIPS 4KEc |
| CPU1 Speed |
500 MHz |
| Flash1 Chip |
Macronix MX25L12835FM2I-10G |
| Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (DDR2) |
| RAM1 Chip |
Nanya NT5TU128M8HE-AC |
| ETH chip1 |
Realtek RTL8382M |
| ETH chip2 |
Realtek RTL8218B |
| Switch |
Realtek RTL8382M |
| Ethernet Port Count |
16-1GbE |
| Ethernet connector |
8P8C |
| Wired Standard |
IEEE 802.3i/3u/3ab |
| Auto-MDIX |
supported |
| Jumbo frame |
yes |
| Switch Class |
managed |
| Expansion IF types |
none specified |
| Stock bootloader |
U-Boot 2011.12 2.0.0.59413 |
| Stock FW OS |
ucLinux 2.6.19 |
| Power |
100-240 VAC ~ 50/60 Hz, 0.25 A |
| Connector type |
IEC 60320 C14 |
| Serial Port (UART) |
yes, 4-pin header, populated, 3.3V TTL, (115200 8N1), J12 |
| JTAG Port |
yes, 20-pin header, unpopulated, J11 |
| Other | |
|
Default IP address: 192.168.1.1 | |
|
Flags: Smart switch, LACP, SNMP, MSTP, RSTP, metal case, heatsink | |
| 3rd Party Firmware Support | |
|
Additional chips | |
| Retail | |
| (Est.) release date | 24 July 2013 |
| Newegg | N82E16833181322 |
| UPC |
760559121006 (UPC DB, On eBay) |
| EAN |
0760559121006 (UPC DB, On eBay) |
| ASIN |
B00H1OM0BA  |
| Country of manuf | China |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented ZyXEL device with specifications, see ZyXEL.
Overview
- "37ZY-G716D0.413 V1.3" is silkscreened on board.
Specifications
- Processor: Realtek RTL8382M Multi-Layer Managed Switch
- Controller with Embedded MIPS 4KEc @500MHz
- Flash/RAM: 16MB (SPI NOR) Flash, 128MB RAM (DDR2)
- 16x Gigabit Ethernet ports
- 32Gbps switching capacity
Links of Interest
Reviews
Miscellaneous
- On Enkosp (RU)
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
OpenWrt Target: realtek
OpenWrt Subtarget: rtl838x
OpenWrt Package architecture: mips_4kec
Support started version: 22.03.0
Current supported version: 23.05.5
Please insert instructions here
Pictures
internal
