ZyXEL G-570S v2/Serial info
From TechInfoDepot
Jump to navigationJump to searchBoot log
| boot log |
|---|
Ethernet eth0: MAC address 00:03:7f:09:43:7b
IP: 192.168.0.35/255.255.255.0, Gateway: 192.168.0.254
Default server: 192.168.0.36
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version 1.0.1.0 - built 22:14:23, Feb 9 2007
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Board: ap61
RAM: 0x80000000-0x80800000, [0x80040ba0-0x807e1000] available
FLASH: 0xbfc00000 - 0xbfff0000, 64 blocks of 0x00010000 bytes each.
Executing boot script in 2.000 seconds - enter ^C to abort
RedBoot> fis load -l vmlinux.bin.l7
Image loaded from 0x80041000-0x8018c000
RedBoot> go
<4>CPU revision is: 00019064
<4>Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
<4>Primary data cache 16kB 4-way, linesize 16 bytes.
<4>Linux version 2.4.25-LSDK-5.0.1.20 (cres@rd3preheat) (gcc version 3.3.3) #1 7
<4>Determined physical RAM map:
<4> memory: 00800000 @ 00000000 (usable)
<4>On node 0 totalpages: 2048
<4>zone(0): 2048 pages.
<4>zone(1): 0 pages.
<4>zone(2): 0 pages.
<4>Kernel command line: console=ttyS0,9600
<4>Using 92.000 MHz high precision timer.
<4>Calibrating delay loop... 183.50 BogoMIPS
<6>Memory: 6348k/8192k available
(1162k kernel code, 1844k reserved, 80k data,)
<6>Dentry cache hash table entries: 1024 (order: 1, 8192 bytes)
<6>Inode cache hash table entries: 512 (order: 0, 4096 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<6>Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>Page-cache hash table entries: 2048 (order: 1, 8192 bytes)
<4>Checking for 'wait' instruction... unavailable.
<4>POSIX conformance testing by UNIFIX
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<5>JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications A.
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with no serial options enabled
<6>ttyS00 at 0xb1100003 (irq = 37) is a 16550A
<6>Generic MIPS RTC Driver v1.0
<4>MTD driver for SPI flash.
<4>spiflash: Probing for Serial flash
<4>spiflash: Found SPI serial Flash.
<4>4194304: size
<5>Creating 7 MTD partitions on "spiflash":
<5>0x00000000-0x00030000 : "RedBoot"
<5>0x00030000-0x002d0000 : "rootfs"
<5>0x002d0000-0x00380000 : "vmlinux.bin.l7"
<5>0x00380000-0x003d0000 : "sysconfig"
<5>0x003d0000-0x003e0000 : "config.bin"
<5>0x003e0000-0x003ef000 : "FIS directory"
<4>mtd: partition "FIS directory" doesn't end on an erase block -- force read-oy
<5>0x003ef000-0x003f0000 : "RedBoot config"
<4>mtd: partition "RedBoot config" doesn't start on an erase block boundary -- y
<6>Initializing Cryptographic API
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 512 buckets, 4Kbytes
<6>TCP: Hash tables configured (established 512 bind 1024)
<6>NET4: Ethernet Bridge 008 for NET4.0
<1>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
<1>All bugs added by David S. Miller <davem@redhat.com>
<4>VFS: Mounted root (jffs2 filesystem) readonly.
<6>Freeing unused kernel memory: 64k freed
<4>Algorithmics/MIPS FPU Emulator v1.5
init started: BusyBox v1.00-pre10 (2009.04.02-06:17+0000) multi-call binary
Starting pid 10, console /dev/console: '/etc/rc.d/rcS'
<5>jffs2_scan_inode_node(): Data CRC failed on node at 0x00031568: Read 0x7a01b2
Using /lib/modules/2.4.25-LSDK-5.0.1.20/net/ae531x.o
Warning: loading ae531x will taint the kernel: non-GPL license - Atheros
See http://www.tux.org/lkml/#export-tainted for information about tainted mods
Using /lib/modules/2.4.25-LSDK-5.0.1.20/misc/ar531x-wdt.o
Warning: loading ar531x-wdt will taint the kernel: non-GPL license - Atheros
See http://www.tux.org/lkml/#export-tainted for information about tainted mods
Using /lib/modules/2.4.25-LSDK-5.0.1.20/misc/zcom_log.o
/etc/wlan/wlanconfig not found. Use default settings.
Using /lib/modules/2.4.25-LSDK-5.0.1.20/net/ath_hal.o
Warning: loading ath_hal will taint the kernel: <6>ath_hal: 0.9.16.1 (AR5212, A)
non-GPL license - Proprietary
See http://www.tux.org/lkml/#export-tainted for information about tainted mods
Using /lib/modules/2.4.25-LSDK-5.0.1.20/net/wlan.o
<6>wlan: 0.8.4.2 (Atheros/multi-bss)
Using /lib/modules/2.4.25-LSDK-5.0.1.20/net/ath_rate_atheros.o
Warning: loading<6>ath_rate_atheros: Version 2.0.1
<4>Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
ath_rate_atheros will taint the kernel: non-GPL license - Proprietary
See http://www.tux.org/lkml/#export-tainted for information about tainted mods
Using /lib/modules/2.4.25-LSDK-5.0.1.20/net/ath_ahb.o
<6>ath_ahb: 0.9.4.5 (Atheros/multi-bss)
<6>wifi0: Atheros 2317 WiSoC: mem=0xb0000000, irq=3
<4>Invalid PHY ID1 for enet0 port0. Expected 0x0243, read 0x0000
<6>device eth0 entered promiscuous mode
/etc/wlan/wlanconfig.0 not found. Use default settings.
<mapping sub-ioctl turbo to cmd 0x8BE0-1>
/etc/wlan/wlanconfig.0.0 not found. Use default settings.
<6>device ath0 entered promiscuous mode
<6>br0: port 1(eth0) entering learning state
Updating neighbor's ARP cache ...
<6>br0: port 1(eth0) entering forwarding state
<6>br0: topology change detected, propagating
Using /lib/modules/2.4.25-LSDK-5.0.1.20/misc/zcom_misc.o
cp: /mnt/jffs2/CAcert: No such file or directory
cp: /mnt/jffs2/cert: No such file or directory
configserver 2.1.2
Starting pid 177, console /dev/console: '/bin/sh'
BusyBox v1.00-pre10 (2009.04.02-06:17+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
wlan[0,0]->
<mapping sub-ioctl pureg to cmd 0x8BE0-37>
<mapping sub-ioctl hide_ssid to cmd 0x8BE0-19>
<mapping sub-ioctl bintval to cmd 0x8BE0-29>
<mapping sub-ioctl dtim_period to cmd 0x8BE0-28>
<mapping sub-ioctl ap_bridge to cmd 0x8BE0-20>
<mapping sub-ioctl abolt to cmd 0x8BE0-26>
<mapping sub-ioctl maccmd to cmd 0x8BE0-17>
<mapping sub-ioctl maccmd to cmd 0x8BE0-17>
<mapping sub-ioctl authmode to cmd 0x8BE0-3>
<mapping sub-ioctl wmm to cmd 0x8BE0-18>
<mapping sub-ioctl wmm_aggrmode to cmd 0x8BE0-61>
<mapping sub-ioctl uapsd to cmd 0x8BE0-53>
<6>br0: port 2(ath0) entering learning state
<6>br0: port 2(ath0) entering forwarding state
<6>br0: topology change detected, propagating
wlan[0,0]
|
Flash
cat /proc/mtd dev: size erasesize name mtd0: 00030000 00010000 "RedBoot" mtd1: 002a0000 00010000 "rootfs" mtd2: 000b0000 00010000 "vmlinux.bin.l7" mtd3: 00050000 00010000 "sysconfig" mtd4: 00010000 00010000 "config.bin" mtd5: 0000f000 00010000 "FIS directory" mtd6: 00001000 00010000 "RedBoot config"
