Wistron NeWeb CA8-4 Pro
From TechInfoDepot
Jump to navigationJump to searchabg (AG108) | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| access point | |||||||||||||
| InfoDepot Wiki | |||||||||||||
| 3rd Party Firmware | |||||||||||||
| dd-wrt | |||||||||||||
| OpenWrt | |||||||||||||
| Tomato any flavor |
Incompatible | ||||||||||||
| Gargoyle |
Status Unknown | ||||||||||||
| Platform | |||||||||||||
| Brand • Model • Rev |
Wistron NeWeb CA8-4 Pro | ||||||||||||
| FCC ID |
none specified | ||||||||||||
| Type |
access point | ||||||||||||
| CPU1 | |||||||||||||
| CPU1 Type |
MIPS 4Kc | ||||||||||||
| CPU1 Speed |
180 MHz | ||||||||||||
| Flash1 Chip |
Spansion S29AL032D | ||||||||||||
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||||||||||
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||||||||||
| RAM1 Chip |
Brand? Model? | ||||||||||||
| ETH chip1 | |||||||||||||
| Switch |
Marvell 88E6060 | ||||||||||||
| Ethernet Port Count |
3-100MbE-LAN | ||||||||||||
| Wired Standard |
IEEE 802.3/3u | ||||||||||||
|
802dot11 OUI: none specified | |||||||||||||
| Stock bootloader |
zImage loader (LZMA) | ||||||||||||
| Stock FW OS |
Linux | ||||||||||||
| Expansion IF types |
none specified | ||||||||||||
| Power |
5 VDC, 2 A | ||||||||||||
| Other | |||||||||||||
|
| |||||||||||||
| 3rd Party Firmware Support | |||||||||||||
| Physical | |||||||||||||
| Dimensions |
140.55 X 141.0 X 26.0 (mm) | ||||||||||||
| Radio 1 | |||||||||||||
| Chip1 |
Atheros AR5112A | ||||||||||||
| Wireless interface OUI |
none specified | ||||||||||||
| Antenna Connector Type |
none specified | ||||||||||||
| Wireless Standard |
IEEE 802.11a/b/g | ||||||||||||
| 802.11g |
up to 54 Mbps | ||||||||||||
| 802.11b |
up to 11 Mbps | ||||||||||||
| 802.11a |
up to 54 Mbps | ||||||||||||
| WiFi Operating Frequency |
2400 -2497 or 4900 – 5825 GHz | ||||||||||||
| |||||||||||||
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Wistron NeWeb device with specifications, see Wistron NeWeb.
Overview
See also: Wistron NeWeb RDAA-81
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
 | DD-WRT Activation Required. |
Supported by dd-wrt as of = v.24 rc7 - build 9360
Please insert instructions here
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
| OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
Please insert instructions here
Categories:
- Wistron NeWeb
- Embedded system/access point
- Embedded System Atheros
- Embedded System AR2313A
- Atheros
- Embedded System MIPS 4Kc
- Embedded System
- Embedded System Marvell
- Embedded System 88E6060
- Marvell
- DD-WRT Supported
- OpenWrt Supported
- Embedded System AR5112A
- Embedded System IEEE 802.11a/b/g
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- DD-WRT Activation Required
- English Documentation
