Westell VersaLink 7500 (A90-750015-07)

From TechInfoDepot
Jump to navigationJump to search
bg (G54)
Verizon Westell Versalink 7500
Westell7500 top.jpg
InfoDepot Wiki
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Incompatible
Tomato any flavor
Incompatible
Platform
BrandModelRev
Westell Versalink 7500
Model Part Number
A90-750015-07
FCC ID
Type
wireless router, dsl modem
CPU1
Broadcom BCM6358
CPU1 Type
BMIPS4350
CPU1 Speed
not specified ( 2 cores )
Flash1 Chip
Spansion GL032M90BFI04
Flash1 Size
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br />
Flash2 Chip
Macronix MX29LV160BXEI-70G
Flash2 Size
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Size
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Chip
Nanya NT5DS16M16CS-6K
ETH chip1
Broadcom BCM6358
Switch
Broadcom BCM5325E
Ethernet Port Count
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 00:23:97 (1 E, -), 0C:D5:02
Ethernet OUI: 00:23:97 (1 E, -), 0C:D5:02

Expansion IF types
none specified
Power
12 VDC, 1 A
Connector type
barrel
Flags:
ADSL2+
Other

Default SSID: 10FXxxxxxxxx
, 11FXxxxxxxxx

Manuf/OEM/ODM
Foxconn U65L006
Retail
FCC approval date 21 December 2007
ASIN B00377I40G Flag of the United States.svg
Country of manuf China
Radio 1
Chip1
Broadcom BCM4318E
Wireless interface OUI
00:23:97, 0C:D5:02
Antenna Connector Type
none specified
Wireless Standard
IEEE 802.11b/g
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 FCC ID
Westell VersaLink 7501 (A90-750115-07)CH87500XX-07

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

54 Mbps - 2.4GHz 802.11g = G54 class


Overview

Verizon Westell Versalink 7500

  • "U65L006", "800215", "GP" is silkscreened on the board.
The default SSID is the serial number. A sample serial number is 11FX05091328
(11FXxxxxxxxx is one likely pattern, some devices may use other variants).

A90-750045-07 is an edition of the 7500 (as opposed to the 7501).

The first 4 digits after A90 specify the board model, the two digits
after that is the market (ISP) the router is being used / distributed by.
Westell isn't specifying what ISP 750045 is for.
So, A90-750045 should be equivalent to the Verizon Westell Versalink 7500
with model A90-750015. Last 2 digits would believe to be the version.

Westell 7500 Setup for BRIDGE MODE

Westell VersaLink 7500 Setup for BRIDGE MODE
===Changing the Westell VersaLink 7500 to Bridge Mode===

In order to use third-party routers with your Westell VersaLink 7500 gateway,

you must first change your VersaLink gateway to Bridge mode.

Note: The setup screens may vary slightly from the ones included below, depending

on when you purchased your VersaLink gateway and the firmware running on it.

To change your Westell VersaLink 7500 gateway to Bridge mode

1.Log in to the Westell VersaLink 7500 gateway by entering

http://192.168.1.1 in your browser’s address bar.

Show Me

2.When prompted, enter your gateway's user name and password.

Show Me

Note: The default User Name is admin and password is password.

3.From the main menu, click My Network.

Show Me

Updating the connection settings

4.Click Network Connections in the left navigation panel.

Show Me

5.Click Broadband Connection (DSL).

Show Me

6.Under the VC’s section, click the Edit icon.

Show Me

7.Select Bridge from the Protocol drop-down menu.

Show Me

8.Select routed bridge in the Bridge Mode field.

Show Me

9.Click OK to confirm you want to reset your modem.

The Westell gateway will now reset itself.

Show Me

Turning wireless off

10.Once the modem resets, the main page will display.

If the main page doesn't display, click Main.

Show Me

Note: When configuring the Westell VersaLink 327W or 7500 to bridge mode,

the wireless settings must be disabled.

Once the device is configured to bridge mode, you may then re-enable wireless.

11.Click Wireless Settings.

Show Me

12.Click Basic Security Settings in the left navigation panel.

Show Me

13.Turn off Wireless by selecting Off.

Show Me

14.Scroll to the bottom of the window and click Apply.

15.Click OK when the warning displays that

your wireless access will be interrupted.

Show Me

Changing the LAN settings

16.You will be redirected to the main page.

If the main page doesn't display, click Main.

Show Me

17.Click My Network.

Show Me

18.Click Network Connections.

Show Me

19.Click LAN.

Show Me

20.Remove the check from the Private LAN DHCP Server Enable box.

Show Me

21.Click Apply.

Turning wireless back on

22.Click OK if a warning displays that enabling

private LAN will disable public LAN.

Show Me

23.The modem is now in Bridge Mode.

Close the window if you don't want to re-enable wireless and continue with Step 26.

To enable wireless, continue with Step 22 - 25 below.

24.Click Wireless Settings.

Show Me

25.Click Basic Security Settings.

Show Me

26.Select On under "Turn Wireless On."

Show Me

27.Your VersaLink gateway is now in Bridge mode with wireless enabled.

Close the VersaLink configuration window.

28.The last step before you're ready to connect your third-party router

is to terminate any active TCP/IP connections on your network.