Tenda W301A v7
From TechInfoDepot
Jump to navigationJump to searchbgn (N300) | |||||
---|---|---|---|---|---|
Wireless N300 Ceiling Access Point | |||||
Support | |||||
3rd Party Firmware | |||||
dd-wrt |
Status Unknown | ||||
OpenWrt |
Incompatible | ||||
Tomato any flavor |
Incompatible | ||||
Platform | |||||
Brand • Model • Rev |
Tenda W301A v7 | ||||
FCC ID | |||||
Board ID |
10021027 | ||||
Type |
access point | ||||
CPU1 |
Broadcom BCM5357C0 | ||||
CPU1 Type |
MIPS 74K | ||||
CPU1 Speed |
300 MHz | ||||
Flash1 Chip |
GigaDevice Model? | ||||
Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||
RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||
RAM1 Chip |
Winbond Model? | ||||
ETH chip1 |
Broadcom BCM5357C0 | ||||
Ethernet Port Count |
1-100MbE-LAN | ||||
Wired Standard |
IEEE 802.3i/3u | ||||
802dot11 OUI: none specified | |||||
Expansion IF types |
none specified | ||||
PoE |
802.3af, standard | ||||
Power |
12 VDC, 1 A | ||||
Connector type |
barrel | ||||
Serial Port (UART) |
yes | ||||
Other | |||||
Default SSID: Tenda_XXXXXX (26 addl. devices) | |||||
Manuf/OEM/ODM | |||||
Retail | |||||
FCC approval date | 04 June 2014 | ||||
Country of manuf | China | ||||
Radio 1 | |||||
Chip1 |
Broadcom BCM5357C0 | ||||
Wireless interface OUI |
none specified | ||||
Antenna Connector Type |
none specified | ||||
MIMO status |
2x2:2 | ||||
Wireless Standard |
IEEE 802.11b/g/n | ||||
802.11n |
up to 300 Mbps | ||||
802.11g |
up to 54 Mbps | ||||
802.11b |
up to 11 Mbps | ||||
WiFi Operating Frequency |
2.4 GHz | ||||
|
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Tenda device with specifications, see Tenda.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
"10021027" and "V7.0" is silkscreened on the board in the FCC photos.
See also: IP-COM W40AP and Tenda W330A