Tenda W3002R

From TechInfoDepot
Jump to navigationJump to search
bgn (N300)
Wireless N300 High Power Router
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Incompatible
Tomato any flavor
Incompatible
Platform
BrandModelRev
Tenda W3002R
FCC ID
Type
wireless router
CPU1
Broadcom BCM5357C0
CPU1 Type
MIPS 74K
CPU1 Speed
300 MHz
Flash1 Chip
Brand? Model?
Flash1 Size
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip
EtronTech Model?
ETH chip1
Broadcom BCM5357C0
Switch
Broadcom BCM5357C0
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: none specified

Expansion IF types
none specified
Power
9 VDC, 1 A
Connector type
barrel
Flags:
schematics, block diagram
Other

Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 795 additional devices
of which 57 are Tenda devices

Retail
FCC approval date 02 April 2013
UPC 885397020400
(UPC DB, On eBay)
ASIN B00F3ADAGI Flag of the United States.svg
Country of manuf China
Radio 1
Chip1
Broadcom BCM5357C0
Wireless interface OUI
none specified
Antenna Connector Type
none specified
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Tenda device with specifications, see Tenda.

300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"10015133" and "V1.0" is silkscreened on the board in the FCC photos.

This device is using two Skyworks ( / SiGe) SE2605L / 2605L High Power 2.4GHz Power Amplifier ICs.

The device has 2MB Flash and 16MB RAM. (see W3002R bootlog in OpenWrt forum)

Likely C8:3A:35 OUI..