Tenda AC6

multiple revisions of this device, use caution

abgn+ac (AC1200)
AC1200 Smart Dual-Band WiFi Router
Homepage	Product page
Support	Support page
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Status Unknown
Platform
Brand • Model • Rev	Tenda AC6 v1
FCC ID	V7TAC6
IC ID	9034A-AC6
Board ID	10029756
Type	wireless router
CPU1	Broadcom BCM53573B0
CPU1 Type	ARM Cortex-A7
CPU1 Speed	900 MHz
Flash1 Chip	Winbond Model?
Flash1 Size	8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Size	64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br />
RAM1 Chip	Winbond W9751G6KB-25
ETH chip1	Broadcom BCM53573B0
Switch	Broadcom BCM53573B0
Ethernet Port Count	1-WAN 3-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: C8:3A:35 (21 E, 34 W) Ethernet OUI: C8:3A:35 (21 E, 34 W)
Stock bootloader	CFE 9.10.178.27 1.0.37 for BCM947XX
Stock FW OS	Linux
Expansion IF types	none specified
Power	12 VDC, 1 A
Connector type	barrel
Other
Default SSID: Tenda_XXXXXX (26 addl. devices) Default IP address: 192.168.0.1 the IP 192.168.0.1 is used by 799 additional devices of which 57 are Tenda devices
Retail
FCC approval date	30 September 2016
DealExtreme	On DealExtreme
Newegg	N82E16833555073
ASIN	B06X1CHFJ5
Country of manuf	China
Radio 1
Chip1	Broadcom BCM53573B0
Wireless interface OUI	C8:3A:35
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11a/n/ac
802.11ac	up to 867 Mbps
802.11n	up to 300 Mbps
802.11a	up to 54 Mbps
WiFi Operating Frequency	5 GHz
Radio 2
Chip1	Broadcom BCM43217
Wireless interface OUI	C8:3A:35
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio cor_rev	24
CPU1 brand Radio1 chip1 brand Radio2 chip1 brand Tenda AC6 Broadcom Broadcom Broadcom Tenda AC6 V2 Realtek Realtek Realtek

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Tenda device with specifications, see Tenda.

• 867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.),

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AC1200 class

Overview

• Web GUI: http://tendawifi.com

Original Full Dump

JTAG-Serial Info

Serial

Boot log

Boot log • >>

Decompressing...done Found ST compatible serial flash with 128 64KB blocks; total size 8MB CFE version 9.10.178.27 (r584393) based on BBP 1.0.37 for BCM947XX (32bit,SP,) Build Date: Fri Jul 1 10:44:14 EDT 2016 (root@linux-empc) Copyright (C) 2000-2008 Broadcom Corporation. Init Arena Init Devs. Boot partition size = 262144(0x40000) DDR Clock: 392 MHz Info: DDR frequency set from clkfreq=900,*392* et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 9.10.178.27 (r584393) CPU type 0x0: 900MHz Tot mem: 65536 KBytes CFE mem: 0x00F00000 - 0x017A367C (9057916) Data: 0x00F6BA24 - 0x00F6C05C (1592) BSS: 0x00F6C068 - 0x00FA167C (218644) Heap: 0x00FA167C - 0x017A167C (8388608) Stack: 0x017A167C - 0x017A367C (8192) Text: 0x00F00000 - 0x00F5F8EC (391404) Boot: 0x017A4000 - 0x017E4000 Reloc: I:00000000 - D:00000000 Mac:4-95-e6-24-d5-f0 Device eth0: hwaddr 04-95-E6-24-D5-F0, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set upgrade wait time is 3s **upgrade_wait over! Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: .... 4177792 bytes read Entry at 0x00008000 Closing network. Starting program at 0x00008000 [ 0.890000] console [ttyS0] enabled, bootconsole disabled [ 0.910000] brd: module loaded [ 0.920000] loop: module loaded [ 0.920000] pflash: found no supported devices [ 0.930000] bcmsflash: squash filesystem found at block 30 [ 0.930000] Creating 7 MTD partitions on "bcmsflash": [ 0.940000] 0x000000000000-0x000000800000 : "All" [ 0.940000] 0x000000000000-0x000000040000 : "Bootloader" [ 0.950000] 0x000000040000-0x0000007d0000 : "KernelFS" [ 0.950000] 0x0000001e488c-0x0000007d0000 : "rootfs" [ 0.960000] 0x0000007d0000-0x0000007e0000 : "CFM_BACKUP" [ 0.960000] 0x0000007e0000-0x0000007f0000 : "CFM" [ 0.970000] 0x0000007f0000-0x000000800000 : "nvram" [ 0.970000] nflash: found no supported devices [ 0.980000] PPP generic driver version 2.4.2 [ 0.980000] PPP Deflate Compression module registered [ 0.990000] PPP BSD Compression module registered [ 0.990000] PPP MPPE Compression module registered [ 1.000000] NET: Registered protocol family 24 [ 1.000000] u32 classifier [ 1.000000] Actions configured [ 1.010000] Netfilter messages via NETLINK v0.30. [ 1.010000] nf_conntrack version 0.5.0 (938 buckets, 3752 max) [ 1.020000] [BM CORE ] INFO: online ip data hash table created, size = 199 [ 1.020000] [BM CORE ] INFO: online_ip proc file created [ 1.030000] ctnetlink v0.93: registering with nfnetlink. [ 1.030000] create /proc/behavior/emailbcc SUCCESSFULLY. [ 1.040000] netfilter smtp init successfully [ 1.040000] xt_time: kernel timezone is -0000 [ 1.040000] Kernel:Init flow dev success. [ 1.050000] IPv4 over IPv4 tunneling driver [ 1.050000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.060000] TCP cubic registered [ 1.060000] NET: Registered protocol family 17 [ 1.060000] L2TP core driver, V2.0 [ 1.070000] PPPoL2TP kernel driver, V2.0 [ 1.070000] L2TP IP encapsulation support (L2TPv3) [ 1.070000] L2TP netlink interface [ 1.080000] L2TP ethernet pseudowire support (L2TPv3) [ 1.080000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> [ 1.090000] All bugs added by David S. Miller <davem@redhat.com> [ 1.140000] Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012 [ 1.150000] brcmnand: found no supported devices [ 1.160000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3. [ 1.170000] devtmpfs: mounted [ 1.170000] Freeing init memory: 196K [ 1.180000] Failed to execute /sbin/preinit. Attempting defaults... mkdir: can't create directory '/var/run': File exists [ 3.220000] [BM CORE ] INFO: bm_init success [ 3.220000] bm_debug_init_proc success! [ 3.220000] [U2K MODULE ] INFO: bm_u2k_info_init success [ 3.290000] [MAC FILTER ] INFO: bm_mac_filter init success [ 3.410000] [PRIVILEGE IP] INFO: privilege ip init success [ 3.500000] qos qos_init 1627: qos module init success [ 3.580000] OS TYPE INIT FINISHED [ 3.580000] [URL FILTER ] INFO: url filter init success [ 3.770000] fastnatconf fastnat_conf_init 611: fastnat conf module init success Give root password for system maintenance (or type Control-D for normal startup):[ 3.980000] udevd (353): /proc/353/oom_adj is deprecated, please use /proc/353/oom_score_adj instead. init_core_dump 1816: rlim_cur = 0, rlim_max = -1 init_core_dump 1825: open core dump success init_core_dump 1834: rlim_cur = 5242880, rlim_max = 5242880 func:InitCfm begin load_mib.... ######## STARTING PROGRAM ######### flash_read:ret = 65536 crc = a1eca6bb, newcrc = a1eca6bb flash_read:ret = 65536 crc = 48ce1225, newcrc = 48ce1225 flash_read:ret = 65536 crc = 48ce1225, newcrc = 48ce1225 flash_to_file:open Policy failed. going to rewrite flash... open /etc/policy_bak.cfg failed. rewrite flash ok... failure to open policy source: /etc/policy.cfg right lan[2]:0 right lan[1]:1 right lan[0]:2 right wan[0]:3 vlan_array[0]: value 0 index_num 3 name eth0 cpu_port 5index[0] 0 index[1] 1 index[2] 2 index[3] 0 index[4] 0 vlan_array[1]: value 1 index_num 1 name eth0 cpu_port 5index[0] 3 index[1] 0 index[2] 0 index[3] 0 index[4] 0 vlan_array[2]: value -1 index_num 1 name cpu_port 0index[0] 4 index[1] 0 index[2] 0 index[3] 0 index[4] 0 vlan_array[3]: value -2 index_num 0 name cpu_port 0index[0] 0 index[1] 0 index[2] 0 index[3] 0 index[4] 0 vlan_array[4]: value -2 index_num 0 name cpu_port 0index[0] 0 index[1] 0 index[2] 0 index[3] 0 index[4] 0 nvram unset vlan1ports nvram unset vlan2ports nvram unset vlan3ports nvram unset vlan4ports nvram unset vlan5ports nvram set vlan1ports="0 1 2 5*" nvram set vlan2ports="3 5" #IPTV STB VLAN ID mode is disable!# main=>116:init server success.1.. No need to start gpio thread. [ 5.070000] et: module license 'Proprietary' taints kernel. [ 5.080000] Disabling lock debugging due to kernel taint [ 5.100000] et_module_init: passivemode set to 0x0 [ 5.110000] et_module_init: txworkq set to 0x0 [ 5.110000] et_module_init: et_txq_thresh set to 0xce4 [ 5.120000] et_module_init: et_rxlazy_timeout set to 0x3e8 [ 5.120000] et_module_init: et_rxlazy_framecnt set to 0x20 [ 5.130000] stbport=0=wanport=3= [ 5.150000] eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 9.10.178.27 (r584393) insmod: can't read '/lib/modules/2.6.36.4brcmarm/kernel/drivers/net/proxyarp/proxyarp.ko': No such file or directory [ 7.090000] wl_module_init: passivemode set to 0x0 [ 7.090000] wl_module_init: txworkq set to 0x0 [ 7.120000] External imprecise Data abort at addr=0x1f4fc, fsr=0x1c06, pc=0x7f09c298 lr=0x7f17c93c ignored. [ 7.130000] External imprecise Data abort at addr=0x1f4fc, fsr=0x1c06, pc=0x7f17c8fc lr=0x8021a074 ignored. [ 7.150000] eth1: Broadcom BCM43b6 802.11 Wireless Controller 9.10.178.27 (r584393 WLTEST) [ 7.160000] PCI: Enabling device 0001:01:00.0 (0140 -> 0142) [ 7.200000] eth2: Broadcom BCM43227 802.11 Wireless Controller 9.10.178.27 (r584393 WLTEST) sh: can't create /proc/irq/163/smp_affinity: nonexistent directory sh: can't create /proc/irq/169/smp_affinity: nonexistent directory ifconfig: SIOCSIFHWADDR: No such device ifconfig: SIOCGIFFLAGS: No such device ### set br0 mac [04:95:e6:24:d5:f0]### [5] ##############add vlan devices [vconfig add eth0 1] ##############add vlan devices [vconfig add eth0 2] [ 7.490000] device eth0 entered promiscuous mode ifconfig: SIOCSIFHWADDR: No such device [ 7.660000] device vlan1 entered promiscuous mode [ 7.680000] br0: topology change detected, propagating [ 7.690000] br0: port 1(vlan1) entering forwarding state [ 7.690000] br0: port 1(vlan1) entering forwarding state [ 7.710000] IPv4 FIB: Using LC-trie version 0.409 Sat Jan 1 00:00:00 UTC 2000 Loading dnrd... killall: dnrd: no process killed [compatibility:is_compatible:80] The software is compatible! _eval 98: child process create success _eval 98: child process create success _start_time_check 202: time_check register success, register_pid = 456 _eval 94: child process status is 0 _start_httpd 219: httpd register success, register_pid = 457 _eval 94: child process status is 0 _start_ucloud_v2 357: ucloud_v2 register success, register_pid = 458 _eval 94: child process status is 0 _start_buisness_proc 383: buisness_proc register success, register_pid = 459 _eval 94: child process status is 0 _start_auto_discover 237: _start_auto_discover register success, register_pid = 460 auto_discover business_proc httpd ucloud_v2 time_check netctrl [TIMER_CHECK >>time_check_reboot_info_printf(51)]: enable:1 [TIMER_CHECK >>time_check_reboot_info_printf(52)]: type:1 [TIMER_CHECK >>time_check_reboot_info_printf(57)]: wday_en:1;1;1;1;1;1;1 [TIMER_CHECK >>time_check_reboot_info_printf(58)]: start_time:03:00 [TIMER_CHECK >>time_check_reboot_info_printf(59)]: end_time:05:00 [TIMER_CHECK >>time_check_reboot_info_printf(60)]: max_speed:3 [TIMER_CHECK >>time_check_reboot_info_printf(61)]: check_speed=3000 [TIMER_CHECK >>time_check_reboot_info_printf(62)]: wan_ifnames:eth1 [TIMER_CHECK >>time_check_power_info_printf(50)]: enable:0 [TIMER_CHECK >>time_check_power_info_printf(51)]: type:1 [TIMER_CHECK >>time_check_power_info_printf(56)]: wday_en:1;1;1;1;1;1;1 [TIMER_CHECK >>time_check_power_info_printf(57)]: start_time:00:00 [TIMER_CHECK >>time_check_power_info_printf(58)]: end_time:07:00 [TIMER_CHECK >>time_check_power_info_printf(59)]: max_speed:3 [TIMER_CHECK >>time_check_power_info_printf(60)]: check_speed=3000 wl2g_op:0 wl5g_op:0 fopen: No such file or directory init_core_dump 1816: rlim_cur = 5242880, rlim_max = 5242880 init_core_dump 1825: open core dump success init_core_dump 1834: rlim_cur = 5242880, rlim_max = 5242880 logserver.c check network 192.168.0.1 success init_core_dump 1816: rlim_cur = 5242880, rlim_max = 5242880 init_core_dump 1825: open core dump success init_core_dump 1834: rlim_cur = 5242880, rlim_max = 5242880 Yes: ****** WeLoveLinux****** Welcome to ... init_core_dump 1816: rlim_cur = 5242880, rlim_max = 5242880 init_core_dump 1825: open core dump success init_core_dump 1834: rlim_cur = 5242880, rlim_max = 5242880 ######## RECEIVING DATA ######### create socket fail -1 [httpd][debug]----------------------------webs.c,157 httpd listen ip = 192.168.0.1 port = 80 webs: Listening for HTTP requests at address 192.168.0.1 RTNETLINK answers: Operation not supported sh: can't create /proc/br0_ip: nonexistent directory [ 10.930000] max_new_conntrack=4000 [ 11.120000] fastnatconf fastnat_conf_proc_port_add 350: layer = 3, port = 80, protocol = 6 [ 11.140000] fastnatconf fastnat_conf_add_port 136: add success port = 80, protocol = 6, layer = 3 [ 11.150000] fastnatconf fastnat_conf_proc_port_add 350: layer = 3, port = 443, protocol = 6 [ 11.170000] fastnatconf fastnat_conf_add_port 136: add success port = 443, protocol = 6, layer = 3 [ 11.180000] fastnatconf fastnat_conf_proc_port_add 350: layer = 2, port = 53, protocol = 17 [ 11.200000] fastnatconf fastnat_conf_add_port 136: add success port = 53, protocol = 17, layer = 2 NetCtrl Initializing, Waiting ... Debug->tpi_port.c: tpi_port_handle(61)--type = 0 Debug->tpi_port.c: tpi_port_mode_set(12)--wan_num=1 Debug->tpi_port.c: tpi_port_mode_set(14)--wan[0].portmode=0 sh: nkgw: not found set port 3 to AUTO [ DEBUG ] ******Sucessed to change lan config! ****** killall: dhttpd: no process killed ifconfig: SIOCSIFFLAGS: Cannot assign requested address ifconfig: SIOCSIFFLAGS: Cannot assign requested address [ DEBUG ] 2.4G wisp enabled. iptables: No chain/target/match by that name. ******************************** goahead 3.3.0 start ******************************** goahead: 4: main----51 goahead: 4: initPlatform----398 goahead: 4: websOpen----233 iptables v1.4.12.2: Couldn't load target `dmz_forward_pre':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. [mac_vendor_init : 141] mac vendor list init OK! nbns task start: [VENDOR_DEBUG _____check_vendor_network(131)______]:Get host error! vendor_task[171] check vendor network failed! arp task satrt: iptables v1.4.12.2: Couldn't load target `vpnserver':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `dmz_forward_post':No such file or directory Try `iptables -h' or 'iptables --help' for more information. NetCtrl Initializing, Waiting ... wisp NOT_CONNECTED, wl_not_conn_time:0 cur_time:946684804 last_time:0 iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: Index of insertion too big. [ DEBUG ] 2.4G wisp enabled. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `port_forward_pre':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables v1.4.12.2: Couldn't load target `port_forward_post':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. goahead: 0: Can't get host address for host Tenda: errno 97, use Local:127.0.0.1 cgi/main.c check network 172.18.166.182 success dlan_ip:172.18.166.182 endpoint[http://172.18.166.182:80] [ DEBUG ] 2.4G wisp enabled. iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `web_wanadmin':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. NetCtrl Initializing, Waiting ... iptables: No chain/target/match by that name. wisp NOT_CONNECTED, wl_not_conn_time:1 cur_time:946684805 last_time:946684804 iptables v1.4.12.2: Couldn't load target `web_wanadmin':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. [ DEBUG ] 2.4G wisp enabled. killall: 3322ip: no process killed killall: 88ip: no process killed killall: gnway: no process killed NetCtrl Initializing, Waiting ... wisp NOT_CONNECTED, wl_not_conn_time:2 cur_time:946684806 last_time:946684805 killall: inadyn: no process killed rm: can't remove '/etc/ddns_*': No such file or directory mdns task start: NetCtrl Initializing, Waiting ... wisp NOT_CONNECTED, wl_not_conn_time:3 cur_time:946684807 last_time:946684806 [ DEBUG ] 2.4G wisp enabled. iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `MINIUPNPD':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. NetCtrl Initializing, Waiting ... wisp NOT_CONNECTED, wl_not_conn_time:5 cur_time:946684809 last_time:946684807 miniupnpd.c,865,ver=1.0,osname=Wireless Router,osver=1.0,osurl=http://192.168.0.1,manuft=Tenda,descri= NetCtrl Initializing, Waiting ... wisp NOT_CONNECTED, wl_not_conn_time:6 cur_time:946684810 last_time:946684809 [ DEBUG ] 2.4G wisp enabled. RTNETLINK answers: No such file or directory dhcpsCfgToStruct 555: lan type is dhcps_lan_dhcpc_configure 272: lan dhcp client not get ip [url_filt[ 17.870000] [URL FILTER ] INFO: g_uf_enable = disable er:apply_url_filter_global_option:339] filter.url.en == 0 [url_filt[ 17.910000] [URL FILTER ] INFO: g_uf_enable = disable er:apply_url_filter_global_optio[ 17.910000] [MAC FILTER ] INFO: g_mac_filter_enable = disable, mf_default_action = accept n:339] filter.url.en == 0 [mac_filter:load_mac_global_options:361] filter.mac.en == 0[ 17.920000] [MAC FILTER ] INFO: g_mac_filter_enable = disable, mf_default_action = accept [mac_filter:load_mac_global_options:381] macfilter.mode == black [mac_filter:load_mac_filter_cfg:442] macfilter.black.id count == 0 [mac_filter:load_parent_control_cfg:507] parent.control.id count ==[ 17.950000] qos qos_rcv_msg 261: ------APPLY--- 0 [[ 17.950000] qos qos_rule_apply 526: g_qos_enable = disable mac_filter:refresh_mac_filter_to_kernel:573] l_mac_filter_changed: 1; l_mac_filter.enable[ 17.960000] qos qos_rcv_msg 289: ------AUTO_APPLY--- : 0 [mac_filter:apply_mac_filter_global_option:558] enable:0; black_white: 0 [mac_filter:apply_mac_filter_global_option:558] enable:0; black_white: 0 [ 17.990000] qos set_wan_if 1086: wanid=0 up_rate=1024000 down_rate=0 [ 17.990000] qos set_wan_if 1086: wanid=1 up_rate=0 down_rate=0 [ 18.010000] qos set_wan_if 1086: wanid=2 up_rate=0 down_rate=0 [ 18.010000] qos set_wan_if 1086: wanid=3 up_rate=0 down_rate=0 [ 18.060000] Init gsbmac dev success. [ 18.060000] The ARP attack defence is init v1 successful killall: arpbrocast: no process killed [ 18.130000] Kernel:Init attack fence dev success. [ 18.130000] the ddos ip attack defnence init successful [ 18.150000] SET_LAN_PARAM_DATA k_data: [ 18.150000] lan ip:3232235521 [ 18.150000] lan mask:4294967040 [ 18.160000] lan submask:3232235520 [ 18.160000] lan interface:br0 [ 18.160000] lan http port:80 icmp is 1,1500,u[ 18.170000] set the proceee ture dp is 1,1500,tcp[ 18.170000] SET_IPOP_FENCE_ATTACK_DATA k_data: _syn is 1,1500 [ 18.180000] ip options:32512 [ 18.180000] SET_BAD_PKT_FENCE_ATTACK_DATA k_data: [ 18.180000] bad pkt:248 [ 18.190000] SET_DDOS_FENCE_ATTACK_DATA k_data: [ 18.190000] status:7 [ 18.190000] tcp threshold:1500 [ 18.200000] udp threshold:1500 [ 18.200000] icmp threshold:1500 NetCtrl Initializing, Waiting ... ---------->>[ start_wifi, wl_rate=24 ] 63052602 CJ+++++set wl1 value = auto [extra_set_nvram:468] set wl1_macmode == disabled killall: wps_monitor: no process killed killall: nas: no process killed killall: eapd: no process killed [ DEBUG ] len=0,lan1_ifnames = [ ERROR ] Do not exsit ifname of guest_network,do nothing! killall: udhcpc: no process killed killall: dnrd-wisp: no process killed killall: pppoecd: no process killed iptables: No chain/target/match by that name. wisp NOT_CONNECTED, wl_not_conn_time:7 cur_time:946684811 last_time:946684810 iptables v1.4.12.2: Couldn't load target `wisp_mangle_pre':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `wisp_mangle_post':No such file or directory Try `iptables -h' or 'iptables --help' for more information. [ 19.380000] CJ++ init gpioouten in hw_init status 1 [ 19.410000] low power set pwr_percent 94 [ 19.420000] low power set pwr_percent 94 ___131___tpi_wifi_unset_intf__ifconfig eth2 0.0.0.0____[ DEBUG ] dev = eth2 ###fd failed to recv packet!### ##### NO SERVER FOUND! ##### iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). NetCtrl Initializing, Waiting ... iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). killall: acsd: no process killed eth2: WLC_SET_VAR(bsscfg:radio_pwrsave_enable): Operation not permitted eth2: WLC_SET_VAR(bsscfg:radio_pwrsave_enable): Operation not permitted eth2: WLC_SET_VAR(chanspec): Invalid argument eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC[ 19.810000] CJ++ init gpioouten in hw_init status 1 _SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation no[ 19.880000] device wl1.1 entered promiscuous mode t supported eth[ 19.890000] br0: topology change detected, propagating 2: WLC_SET_VAR(a[ 19.890000] br0: port 2(wl1.1) entering forwarding state mpdu_rr_retry_li[ 19.900000] br0: port 2(wl1.1) entering forwarding state mit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported eth2: WLC_SET_VAR(taf): Operation not supported NET: Setting wl1.1 hw addr to 04:95:E6:24:D5:F1 NET: Error setting hw for wl1.1; returned -1 Invalid instance identifier br0 eth2: WLC_SET_VAR(trf_mgmt_config): Invalid argument [ 20.020000] wisp or APC is open eth1: WLC_GET_VAR(psta_if): Invalid argument [ DEBUG ] len=0,lan1_ifnames = [ ERROR ] Do not exsit ifname of guest_network,do nothing! wisp NOT_CONNECTED, wl_not_conn_time:8 cur_time:946684812 last_time:946684811 iptables: No chain/target/match by that name. [ DEBUG ] dev = eth2 iptables: Bad rule (does a matching rule exist in that chain?). NetCtrl Initializing, Waiting ... iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). [ DEBUG ] dev = eth2 iptables: No chain/target/match by that name. rm: can't remove '/etc/resolv.conf': No such file or directory ===name(eth1) unit(0)=== td_acs >>td_acs_init_dev_name(2976): ifname eth1: radio is on td_acs >>td_acs_init_dev_name(2986): ifname eth1: auto channel is enable ===name(eth2) unit(1)=== td_acs >>td_acs_init_dev_name(2976): ifname eth2: radio is on td_acs >>td_acs_init_dev_name(2986): ifname eth2: auto channel is enable td_acs >>td_acs_init_cfg(594): set invalid ch:12 td_acs >>td_acs_init_cfg(594): set invalid ch:13 td_acs >>td_acs_init_cfg(610): noise_th=(-88, -65) busy_th=(20, 73) loop(1) cs_timer(900s) eth1: WLC_GET_VAR(bw_cap): Invalid argument td_acs >>td_acs_init_rsi(654): failed to get bw_capret code: -1 td_acs >>td_acs_info_init(735): dev(eth1) acs_init_rsi fail ====td_acs_exit==== ---------->>[ start_wifi, wl_rate=5 ] 63052602 [ ERROR ] coutry_code=PL CJ++set wl0 value = auto wisp NOT_CONNECTED, wl_not_conn_time:9 cur_time:946684813 last_time:946684812 NetCtrl Initializing, Waiting ... killall: wps_monitor: no process killed [ DEBUG ] len=0,lan1_ifnames = [ ERROR ] Do not exsit ifname of guest_network,do nothing! killall: acsd: n[ 21.670000] CJ++ init gpioouten in hw_init status 1 o process killed eth1: cmd=231: Invalid argument eth1: WLC_SET_VAR(bsscfg:radio_pwrsave_enable): Operation not permitted eth1: WLC_SET_VAR(chanspec): Invalid argument eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Oper[ 21.810000] CJ++ init gpioouten in hw_init status 1: Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): [ 21.860000] low power set pwr_percent 88 Operation not supported [ 21.870000] low power set pwr_percent 88 pported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not [ 21.890000] device eth1 entered promiscuous mode supported eth1:[ 21.890000] br0: topology change detected, propagating WLC_SET_VAR(amp[ 21.900000] br0: port 3(eth1) entering forwarding state du_rr_retry_limi[ 21.900000] br0: port 3(eth1) entering forwarding state t_tid): Operation not supported eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth1: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported eth1: WLC_SET_VAR(taf): Operation not supported eth1: cmd=64: Operation not supported Invalid instance identifier br0 device br1 already exists; can't create bridge with the same name [ 21.970000] low power set pwr_percent 88 [ 22.000000] wisp or APC is close [ DEBUG ] len=0,lan1_ifnames = [ ERROR ] Do not exsit ifname of guest_network,do nothing! ===name(eth1) unit(0)=== td_acs >>td_acs_init_dev_name(2976): ifname eth1: radio is on td_acs >>td_acs_init_dev_name(2986): ifname eth1: auto channel is enable ===name(eth2) unit(1)=== td_acs >>td_acs_init_dev_name(2976): ifname eth2: radio is on td_acs >>td_acs_init_dev_name(2986): ifname eth2: auto channel is enable td_acs >>td_acs_init_cfg(594): set invalid ch:12 td_acs >>td_acs_init_cfg(594): set invalid ch:13 td_acs >>td_acs_init_cfg(610): noise_th=(-88, -65) busy_th=(20, 73) loop(1) cs_timer(900s) td_acs >>td_acs_init_rsi(662): band_type:1 bw_cap: 7 coex_enb:1 td_acs >>td_acs_init_width_level(712): Width level: 5g_80=40, 5g_40=73. Interface eth1 scan channels: 36, 40, 44, 48 ===td_acs_scan_timer_func==(eth1)== td_acs >>td_acs_scan_timer_func(2087): band_type:1 bw_cap: 7 coex_enb:1 td_acs_scan_prep: passive_time=250 td_acs >>td_acs_scan_prep(790): scan channel number: 19 td_acs >>td_acs_scan_prep(793): params size: 102 td_acs: (eth1) scan in progress ... [ 22.370000] low power set pwr_percent 88 wisp NOT_CONNECTED, wl_not_conn_time:10 cur_time:946684814 last_time:946684813 NetCtrl Initializing, Waiting ... td_acs: (eth1) scan in progress ... [ 22.630000] low power set pwr_percent 88 td_acs: (eth1) scan in progress ... [ 22.890000] low power set pwr_percent 88 td_acs: (eth1) scan in progress ... [ 23.150000] low power set pwr_percent 88 td_acs >>td_acs_get_scan(974): l[ 23.390000] low power set pwr_percent 88 ist->count: 3, l[ 23.390000] low power set pwr_percent 88 ist->buflen: 104[ 23.400000] low power set pwr_percent 88 4 td_acs >>td_acs_adjust_second_chan(1727): ctr[ 23.400000] low power set pwr_percent 88 l_ch:48 middle: [ 23.410000] low power set pwr_percent 88 0=46 1=50 td_ac[ 23.410000] low power set pwr_percent 88 s >>td_acs_adjust_second_chan(1751): selected mid: 0=46 td_acs >>td_acs_adjust_second_chan(1762): Final selected chanspec: 0xd92e td_acs >>td_acs_run_scan_select(2019): [AUTO_CHANNEL] select chanspec d92e(#48) td_acs: [2000/01/01 00:00:15]: WiFi 5G(eth1) bandwidth change from 40MHz to 80MHz, reason busy=1 td_acs >>td_acs_adjust_bandwidth(1960): Last adjust bandwidth chanspec is 0xe32a(#48). td_acs: selected_chspec=0xe32a td_acs >>td_acs_init_cfg(594): set invalid ch:12 td_acs >>td_acs_init_cfg(594): set invalid ch:13 td_acs >>td_acs_init_cfg(610): noise_th=(-88, -65) busy_th=(20, 73) loop(1) cs_timer(900s) td_acs >>td_acs_init_rsi(662): band_type:2 bw_cap: 3 coex_enb:1 td_acs >>td_acs_init_width_level(695): Width level: 2g_40=3, 2g_20=26. Interface eth2 scan channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 ===td_acs_scan_timer_func==(eth2)== td_acs >>td_acs_scan_timer_func(2087): band_type:2 bw_cap: 3 coex_enb:1 td_acs_scan_prep: passive_time=250 td_acs >>td_acs_scan_prep(790): scan channel number: 13 td_acs >>td_acs_scan_prep(793): params size: 90 NetCtrl Initializing, Waiting ... wisp NOT_CONNECTED, wl_not_conn_time:12 cur_time:946684816 last_time:946684814 td_acs: (eth2) scan in progress ... td_acs: (eth2) scan in progress ... td_acs: (eth2) scan in progress ... td_acs: (eth2) scan in progress ... NetCtrl Initializing, Waiting ... wisp NOT_CONNECTED, wl_not_conn_time:13 cur_time:946684817 last_time:946684816 td_acs: (eth2) scan in progress ... td_acs: (eth2) scan in progress ... td_acs: (eth2) scan in progress ... info, udhcp client (v0.9.8) started td_acs: (eth2) scan in progress ... NetCtrl Initializing, Waiting ... wisp NOT_CONNECTED, wl_not_conn_time:14 cur_time:946684818 last_time:946684817 td_acs: (eth2) scan in progress ... td_acs: (eth2) scan in progress ... td_acs: (eth2) scan in progress ... td_acs: (eth2) scan in progress ... NetCtrl Initializing, Waiting ... wisp NOT_CONNECTED, wl_not_conn_time:15 cur_time:946684819 last_time:946684818 td_acs: (eth2) scan in progress ... td_acs >>td_acs_get_scan(974): list->count: 13, list->buflen: 3556 td_acs >>td_acs_run_scan_select(2019): [AUTO_CHANNEL] select chanspec 1006(#6) td_acs >>td_acs_adjust_bandwidth(1960): Last adjust bandwidth chanspec is 0x1006(#6). td_acs: selected_chspec=0x1006 msg str: [cfm Post time_check 4?relate_module_id=19,string_info=first_time_start] [TIMER_CHECK >>init_time_check_module_var(146)]:key = relate_module_id,value = 19 [TIMER_CHECK >>init_time_check_module_var(154)]:key = string_info,value = first_time_start tpi_sntp_handle(99): start sntp... tpi_set_user_policy,35: entry count:0 systime_server = 211.138.200.208 main,335,sntp_en =1,tz=14.00,checktime=86400 [ DEBUG ] lan dhcp not enable [ DEBUG ] *****netctrl init module entries ok.***** [ DEBUG ] msg:19?op=3,wl_rate=24 [ DEBUG ] key = op,value = 3 [ DEBUG ] key = wl_rate,value = 24 63052602 CJ++++++set wl1 value = auto create socket fail -1 create socket fail -1 sh: u_yunsafe: not found [extra_set_nvram:468] set wl1_macmode == disabled killall: wps_monitor: no process killed [ DEBUG ] len=0,lan1_ifnames = [ ERROR ] Do not exsit ifname of guest_network,do nothing! killall: pppoecd: no process killed wisp NOT_CONNECTED, wl_not_conn_time:0 cur_time:946677620 last_time:946684819 iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `wisp_mangle_pre':No such file or directory Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. iptables v1.4.12.2: Couldn't load target `wisp_mangle_post':No such file or directory Try `iptables -h' or 'iptables --help' for more information. ___131___tpi_wifi_unset_intf__ifconfig eth2 0.0.0.0____[ DEBUG ] dev = eth2 cfg->wl2g_radio_enable=1,cfg->wl5g_radio_enable=1 [ 28.790000] br0: port 2(wl1.1) entering forwarding state [ 28.800000] device wl1.1 left promiscuous mode [ 28.800000] br0: port 2(wl1.1) entering disabled state cfg->wl2g_radio_enable=1,cfg->wl5g_radio_enable=1 [ 28.810000] CJ++ init gpioouten in hw_init status 1 eth2: WLC_SET_VAR(bsscfg:radio_pwrsave_enable): Operation not permitted eth2: WLC_SET_VAR(bsscfg:radio_pwrsave_enable): Operation not permitted eth2: WLC_SET_VAR(chanspec): Invalid argument eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supp[ 28.910000] CJ++ init gpioouten in hw_init status 1 orted eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(a[ 28.990000] device wl1.1 entered promiscuous mode mpdu_rr_retry_li[ 28.990000] br0: topology change detected, propagating mit_tid): Operat[ 29.000000] br0: port 2(wl1.1) entering forwarding state ion not supporte[ 29.000000] br0: port 2(wl1.1) entering forwarding state d eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported eth2: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported eth2: WLC_SET_VAR(taf): Operation not supported NET: Setting wl1.1 hw addr to 04:95:E6:24:D5:F1 NET: Error setting hw for wl1.1; returned -1 Invalid instance identifier br0 device br1 already exists; can't create bridge with the same name eth2: WLC_SET_VAR(trf_mgmt_config): Invalid argument [ 29.090000] wisp or APC is open [ DEBUG ] len=0,lan1_ifnames = [ ERROR ] Do not exsit ifname of guest_network,do nothing! iptables: Chain already exists. wisp NOT_CONNECTED, wl_not_conn_time:1 cur_time:946677621 last_time:946677620 [ DEBUG ] dev = eth2 iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). iptables: Bad rule (does a matching rule exist in that chain?). [ DEBUG ] dev = eth2 ===name(eth1) unit(0)=== td_acs >>td_acs_init_dev_name(2976): ifname eth1: radio is on td_acs >>td_acs_init_dev_name(2986): ifname eth1: auto channel is enable ===name(eth2) unit(1)=== td_acs >>td_acs_init_dev_name(2976): ifname eth2: radio is on td_acs >>td_acs_init_dev_name(2986): ifname eth2: auto channel is enable td_acs >>td_acs_init_cfg(594): set invalid ch:12 td_acs >>td_acs_init_cfg(594): set invalid ch:13 td_acs >>td_acs_init_cfg(610): noise_th=(-88, -65) busy_th=(20, 73) loop(1) cs_timer(900s) td_acs >>td_acs_init_rsi(662): band_type:1 bw_cap: 7 coex_enb:1 td_acs >>td_acs_init_width_level(712): Width level: 5g_80=40, 5g_40=73. Interface eth1 scan channels: 36, 40, 44, 48 ===td_acs_scan_timer_func==(eth1)== td_acs >>td_acs_scan_timer_func(2087): band_type:1 bw_cap: 7 coex_enb:1 td_acs_scan_prep: passive_time=250 td_acs >>td_acs_scan_prep(790): scan channel number: 19 td_acs >>td_acs_scan_prep(793): params size: 102 td_acs: (eth1) scan in progress ... [ 30.230000] low power set pwr_percent 88 wisp NOT_CONNECTED, wl_not_conn_time:2 cur_time:946677622 last_time:946677621 td_acs: (eth1) scan in progress ... [ 30.500000] low power set pwr_percent 88 td_acs: (eth1) scan in progress ... [ 30.760000] low power set pwr_percent 88 td_acs: (eth1) scan in progress ... [ 31.020000] low power set pwr_percent 88 [ 31.020000] low power set pwr_percent 88 [ 31.030000] low power set pwr_percent 88 td_acs >>td_acs_get_scan(974): l[ 31.250000] low power set pwr_percent 88 ist->count: 3, l[ 31.250000] low power set pwr_percent 88 ist->buflen: 104[ 31.260000] low power set pwr_percent 88 4 td_acs >>td_acs_adjust_second_chan(1727): ctr[ 31.260000] low power set pwr_percent 88 l_ch:44 middle: [ 31.270000] low power set pwr_percent 88 0=42 1=46 td_ac[ 31.270000] low power set pwr_percent 88 s >>td_acs_adjust_second_chan(1751): selected mid: 0=42 td_acs >>td_acs_adjust_second_chan(1759): selected:0xd92a is invaild,use org:0xd82e td_acs >>td_acs_adjust_second_chan(1762): Final selected chanspec: 0xd82e td_acs >>td_acs_run_scan_select(2019): [AUTO_CHANNEL] select chanspec d82e(#44) td_acs: [2000/01/01 00:00:23]: WiFi 5G(eth1) bandwidth change from 40MHz to 80MHz, reason busy=2 td_acs >>td_acs_adjust_bandwidth(1960): Last adjust bandwidth chanspec is 0xe22a(#44). td_acs: selected_chspec=0xe22a td_acs >>td_acs_init_cfg(594): set invalid ch:12 td_acs >>td_acs_init_cfg(594): set invalid ch:13 td_acs >>td_acs_init_cfg(610): noise_th=(-88, -65) busy_th=(20, 73) loop(1) cs_timer(900s) td_acs >>td_acs_init_rsi(662): band_type:2 bw_cap: 3 coex_enb:1 td_acs >>td_acs_init_width_level(695): Width level: 2g_40=3, 2g_20=26. Interface eth2 scan channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 ===td_acs_scan_timer_func==(eth2)== td_acs >>td_acs_scan_timer_func(2087): band_type:2 bw_cap: 3 coex_enb:1 td_acs_scan_prep: passive_time=250 td_acs >>td_acs_scan_prep(790): scan channel number: 13 td_acs >>td_acs_scan_prep(793): params size: 90 eth2: cmd=50: Device or resource busy td_acs >>td_acs_run_cs_scan(912): WLC_SCAN failedtd_acs >>td_acs_run_scan_select(1989): acs_run_cs_scan fail [TIMER_CHECK >>init_time_check_module_var(146)]:key = string_info,value = wifi_connect_init wisp NOT_CONNECTED, wl_not_conn_time:3 cur_time:946677623 last_time:946677622 ===td_acs_scan_timer_func==(eth2)== td_acs >>td_acs_scan_timer_func(2087): band_type:2 bw_cap: 3 coex_enb:1 td_acs_scan_prep: passive_time=250 td_acs >>td_acs_scan_prep(790): scan channel number: 13 td_acs >>td_acs_scan_prep(793): params size: 90 wisp NOT_CONNECTED, wl_not_conn_time:4 cur_time:946677624 last_time:946677623 td_acs: (eth2) scan in progress ... td_acs: (eth2) scan in progress ... td_acs: (eth2) scan in progress ... td_acs: (eth2) scan in progress ... wisp NOT_CONNECTED, wl_not_conn_time:5 cur_time:946677625 last_time:946677624 td_acs: (eth2) scan in progress ... td_acs: (eth2) scan in progress ... td_acs: (eth2) scan in progress ... info, udhcp client (v0.9.8) started td_acs: (eth2) scan in progress ... wisp NOT_CONNECTED, wl_not_conn_time:6 cur_time:946677626 last_time:946677625 td_acs: (eth2) scan in progress ... td_acs: (eth2) scan in progress ... td_acs: (eth2) scan in progress ... wisp NOT_CONNECTED, wl_not_conn_time:7 cur_time:946677627 last_time:946677626 td_acs: (eth2) scan in progress ... td_acs: (eth2) scan in progress ... td_acs >>td_acs_get_scan(974): list->count: 16, list->buflen: 4500 td_acs >>td_acs_run_scan_select(2019): [AUTO_CHANNEL] select chanspec 1002(#2) td_acs >>td_acs_adjust_bandwidth(1960): Last adjust bandwidth chanspec is 0x1002(#2). td_acs: selected_chspec=0x1002 wisp NOT_CONNECTED, wl_not_conn_time:8 cur_time:946677628 last_time:946677627 wisp NOT_CONNECTED, wl_not_conn_time:9 cur_time:946677629 last_time:946677628 wisp NOT_CONNECTED, wl_not_conn_time:10 cur_time:946677630 last_time:946677629 wisp NOT_CONNECTED, wl_not_conn_time:11 cur_time:946677631 last_time:946677630 wisp NOT_CONNECTED, wl_not_conn_time:13 cur_time:946677633 last_time:946677631 wisp NOT_CONNECTED, wl_not_conn_time:14 cur_time:946677634 last_time:946677633 wisp NOT_CONNECTED, wl_not_conn_time:15 cur_time:946677635 last_time:946677634 wisp NOT_CONNECTED, wl_not_conn_time:16 cur_time:946677636 last_time:946677635 wisp NOT_CONNECTED, wl_not_conn_time:17 cur_time:946677637 last_time:946677636 wisp NOT_CONNECTED, wl_not_conn_time:18 cur_time:946677638 last_time:946677637 ===td_acs_run_scan_mark==(eth1) mark:0== ===td_acs_run_scan_mark==(eth2) mark:0== wisp NOT_CONNECTED, wl_not_conn_time:19 cur_time:946677639 last_time:946677638 wisp NOT_CONNECTED, wl_not_conn_time:20 cur_time:946677640 last_time:946677639 wisp NOT_CONNECTED, wl_not_conn_time:21 cur_time:946677641 last_time:946677640 wisp NOT_CONNECTED, wl_not_conn_time:22 cur_time:946677642 last_time:946677641 wisp NOT_CONNECTED, wl_not_conn_time:23 cur_time:946677643 last_time:946677642 wisp NOT_CONNECTED, wl_not_conn_time:24 cur_time:946677644 last_time:946677643 wisp NOT_CONNECTED, wl_not_conn_time:25 cur_time:946677645 last_time:946677644 Decompressing...done << WTF - DEBUG ?? >>