TP-LINK TL-SG2452P v4
From TechInfoDepot
Jump to navigationJump to search3rd Party Firmware | |
---|---|
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
TP-LINK TL-SG2452P v4 |
CPU1 |
Realtek RTL8393M |
CPU1 Type |
MIPS 34Kc |
CPU1 Speed |
500 MHz 32-bit |
Bus |
32-bit |
Flash1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
ETH chip1 |
Realtek RTL8393M |
Switch |
Realtek RTL8393M |
Ethernet Port Count |
48-1GbE |
Ethernet connector |
8P8C |
Wired Standard |
IEEE 802.3i/3u/3ab |
Auto-MDIX |
supported |
Jumbo frame |
yes |
Switch Class |
smart |
Ethernet OUI: none specified | |
Expansion IF types |
SFP |
SFP ports |
4 |
Stock bootloader |
U-Boot |
Power |
100-240 VAC ~ 50/60 Hz, 6 A |
Connector type |
AC |
Serial Port (UART) |
yes, 3.3, 38400 / 8N1 |
| |
3rd Party Firmware Support |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented TP-LINK device with specifications, see TP-LINK.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: realtek
OpenWrt Subtarget: rtl839x
OpenWrt Package architecture: mips_24kc
Support started version: 23.05.0
Current supported version: 23.05.5
Comment:
48 port PoE+, 384W budget
On the OpenWrt Wiki
OpenWrt Target: realtek
OpenWrt Subtarget: rtl839x
OpenWrt Package architecture: mips_24kc
Support started version: 23.05.0
Current supported version: 23.05.5
Comment:
48 port PoE+, 384W budget
Please insert instructions here