TP-LINK RE6000XD
From TechInfoDepot
Jump to navigationJump to searchabgn+ac+ax (AX3600) | |
|---|---|
| Range Extender | |
| Wikipedia | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
TP-LINK RE6000XD |
| FCC ID |
none specified |
| Type |
range extender |
| CPU1 |
MediaTek MT7986BLA |
| CPU1 Type |
ARM Cortex-A53 |
| CPU1 Speed |
1.6 GHz ( 4 cores ) 64-bit |
| Flash1 Chip |
GigaDevice Model? |
| Flash1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (SPI NAND) |
| RAM1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR3) |
| RAM1 Chip |
MediaTek MT7986BLA |
| ETH chip1 |
MediaTek MT7986BLA |
| ETH chip2 |
MaxLinear GPY211C0VC |
| Switch |
MediaTek MT7986BLA |
| Ethernet Port Count |
1-2.5GbE x 2-1GbE-LAN |
| Wired Standard |
IEEE 802.3i/3u/3ab/3bz |
|
802dot11 OUI: none specified | |
| Stock bootloader |
U-Boot |
| Expansion IF types |
none specified |
| Power |
12 VDC, 2 A |
| Connector type |
barrel |
| Serial Port (UART) |
yes, 3.3, (115200 8N1) |
|
Flags: Wi-Fi 6 | |
| Other | |
|
| |
| 3rd Party Firmware Support | |
| Radio 1 | |
| Chip1 |
MediaTek MT7975N |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
4x4:4 |
| Wireless Standard |
IEEE 802.11b/g/n/ax |
| 802.11ax |
up to 1148 Mbps |
| 802.11n |
up to 600 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
| Radio 2 | |
| Chip1 |
MediaTek MT7975PN |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
4x4:4 |
| Wireless Standard |
IEEE 802.11a/n/ac/ax |
| 802.11ax |
up to 2402 Mbps |
| 802.11ac |
up to 1733 Mbps |
| 802.11n |
up to 600 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
5 GHz |
For a list of all currently documented MaxLinear chipsets with specifications, see MaxLinear.
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented TP-LINK device with specifications, see TP-LINK.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: mediatek
OpenWrt Subtarget: filogic
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: ?
Current supported version: snapshot
OpenWrt Target: mediatek
OpenWrt Subtarget: filogic
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: ?
Current supported version: snapshot
Please insert instructions here
Categories:
- TP-LINK
- Embedded system/range extender
- Embedded System MediaTek
- Embedded System MT7986BLA
- MediaTek
- Embedded System ARM
- Embedded System Cortex-A53
- Embedded System GPY211C0VC
- Embedded System MaxLinear
- MaxLinear
- OpenWrt Supported
- Embedded System MT7975N
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System MT7975PN
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation
