SonicWALL SonicPoint ACe (APL26-0AE)
From TechInfoDepot
Jump to navigationJump to searchabgn+ac (AC1750) | |
|---|---|
| access point | |
| Wikipedia | |
| 3rd Party Firmware | |
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
SonicWALL APL26-0AE |
| FCC ID |
none specified |
| Type |
access point |
| CPU1 |
Qualcomm Atheros QCA9550 |
| CPU1 Type |
MIPS 74Kc |
| CPU1 Speed |
720 MHz |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
Qualcomm Atheros QCA9550 |
| Switch |
Qualcomm Atheros QCA8334 |
| Ethernet Port Count |
2-1GbE-LAN |
| Wired Standard |
IEEE 802.3i/3u/3ab |
|
802dot11 OUI: none specified | |
| Stock bootloader |
U-Boot |
| Expansion IF types |
USB 2.0 |
| USB ports |
1 |
| USB Hub Compatible |
Untested |
| PoE |
802.3at, standard |
| Power |
100-200 VAC ~ ? Hz, 0.8 A |
| Connector type |
AC |
| Serial Port (UART) |
yes, 115200 / 8N1 |
| Other | |
|
| |
| 3rd Party Firmware Support | |
| Radio 1 | |
| Chip1 |
Qualcomm Atheros QCA9550 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
3x3:3 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 450 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
| Radio 2 | |
| Chip1 |
Qualcomm Atheros QCA9890 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| MIMO status |
3x3:3 |
| Wireless Standard |
IEEE 802.11a/n/ac |
| 802.11ac |
up to 1300 Mbps |
| 802.11n |
up to 450 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
5 GHz |
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.
For a list of all currently documented SonicWALL device with specifications, see SonicWALL.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: ath79
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: ?
Current supported version: snapshot
OpenWrt Target: ath79
OpenWrt Subtarget: generic
OpenWrt Package architecture: mips_24kc
Support started version: ?
Current supported version: snapshot
Please insert instructions here
Categories:
- SonicWALL
- Embedded system/access point
- Embedded System Qualcomm Atheros
- Embedded System QCA9550
- Qualcomm Atheros
- Embedded System MIPS 74Kc
- Embedded System
- Embedded System QCA8334
- OpenWrt Supported
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System QCA9890
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation
