SmartFiber XP8421-B
From TechInfoDepot
Jump to navigationJump to searchabgn+ac (AC1200) | |
---|---|
4GE+1POTS+2.4G & 5G WIFI | |
![]() | |
Homepage | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
SmartFiber XP8421-B |
FCC ID |
none specified |
Type |
wireless router, ONT |
CPU1 ![]() |
EcoNet EN7526GT |
CPU1 Type |
MIPS 34Kc V5.8 |
CPU1 Speed |
900 MHz |
Flash1 Chip |
Toshiba TC58CVG1S3H RAIG |
Flash1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (SPI NAND) |
RAM1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> (DDR3L -1600 800Mhz) |
RAM1 Chip |
Nanya NT5CC256M16DP-DI |
ETH chip1 |
EcoNet EN7526GT |
Switch |
EcoNet EN7526GT |
Ethernet Port Count |
4-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Stock bootloader |
TcBoot |
Expansion IF types |
USB 2.0, SD Card slot |
USB ports |
2 |
SD/MMC Slots |
1 |
USB Hub Compatible |
Untested |
Power |
12 VDC, 1.5 A |
Connector type |
barrel 5.5 mm (OD) |
Flags: EPON/GPON, FTTH | |
Other | |
| |
3rd Party Firmware Support | |
Radio 1 | |
Chip1 |
MediaTek MT7592N |
Wireless interface OUI |
none specified |
Antenna Connector Type |
U.FL |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio 2 | |
Chip1 |
MediaTek MT7612EN |
Wireless interface OUI |
none specified |
Antenna Connector Type |
U.FL |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11a/n/ac |
802.11ac |
up to 867 Mbps |
802.11n |
up to 300 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
For a list of all currently documented EcoNet (MediaTek) SoC's with specifications, see EcoNet (MediaTek).
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
Links of Interest
https://github.com/openwrt/openwrt/actions/runs/13230330183
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
Please insert instructions here
Pictures
Categories:
- SmartFiber
- Embedded system/wireless router
- Embedded system/ONT
- Embedded System EcoNet
- Embedded System EN7526GT
- EcoNet
- Embedded System MIPS 34Kc
- Embedded System V5.8
- OpenWrt WIP
- Embedded System MediaTek
- Embedded System MT7592N
- MediaTek
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Embedded System MT7612EN
- Embedded System IEEE 802.11a/n/ac
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation