SerComm RP101
From TechInfoDepot
Jump to navigationJump to searchbgn (N300) | |||||||
|---|---|---|---|---|---|---|---|
| repeater | |||||||
| 3rd Party Firmware | |||||||
| dd-wrt |
Status Unknown | ||||||
| OpenWrt |
Status Unknown | ||||||
| Tomato any flavor |
Incompatible | ||||||
| Platform | |||||||
| Brand • Model • Rev |
SerComm RP101 | ||||||
| FCC ID | |||||||
| Type |
repeater | ||||||
| CPU1 | |||||||
| CPU1 Type |
MIPS 24KEc | ||||||
| CPU1 Speed |
not specified | ||||||
| Flash1 Chip |
Brand? Model? | ||||||
| Flash1 Size |
? MiB | ||||||
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> | ||||||
| RAM1 Chip |
Nanya NT5TU32M16DG-AC | ||||||
| ETH chip1 | |||||||
| Ethernet Port Count |
1-100MbE-LAN | ||||||
| Wired Standard |
IEEE 802.3i/3u | ||||||
|
802dot11 OUI: none specified | |||||||
| Expansion IF types |
none specified | ||||||
| Power |
? VAC ~ ? Hz, ? A | ||||||
| Connector type |
AC (direct) | ||||||
| Other | |||||||
|
Default IP address: 192.168.0.254 | |||||||
| Manuf/OEM/ODM | |||||||
| Retail | |||||||
| FCC approval date | 07 March 2012 | ||||||
| Country of manuf | Taiwan | ||||||
| Radio 1 | |||||||
| Chip1 | |||||||
| Wireless interface OUI |
none specified | ||||||
| Antenna Connector Type |
U.FL | ||||||
| MIMO status |
2x2:2 | ||||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||||
| 802.11n |
up to 300 Mbps | ||||||
| 802.11g |
up to 54 Mbps | ||||||
| 802.11b |
up to 11 Mbps | ||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||
| |||||||
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented SerComm device with specifications, see SerComm.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
"ACT00C-1.6" is silkscreened on the board in the FCC photos.
Default credentials are from the FCC submitted manual.
