SerComm IP706ST

b (B11)
wireless router
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	SerComm IP706ST
FCC ID	P270K30
Type	wireless router
CPU1	Texas Instruments TNETW5305
CPU1 Type	ARM7
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	ICSI Model? x 2
ETH chip1	Texas Instruments TNETW5305
Switch	ADMtek Model?
Ethernet Port Count	1-WAN 4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	none specified
Power	12 VDC, 0.8 A
Connector type	barrel
Other
Default IP address: 192.168.0.1 the IP 192.168.0.1 is used by 799 additional devices of which 13 are SerComm devices
Manuf/OEM/ODM	SerComm
Retail
Availability	OEM
FCC approval date	03 April 2003
Country of manuf	Taiwan
Radio 1
Chip1	Texas Instruments ACX100
Wireless interface OUI	none specified
Antenna Connector Type	none specified
Wireless Standard	IEEE 802.11b
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented ADMtek chipsets with specifications, see ADMtek.
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.

For a list of all currently documented SerComm device with specifications, see SerComm.

• 11 Mbps - 2.4GHz 802.11b = B11 class

Overview

The FCC test report specifies the CPU as the TNETW5305 (ARM7) and the Flash and RAM size as 1MB and 4MB respectively (with Can Expand noted after the values). It also specifies the Switch chip as a Atan 8995L / AT8985P or Marvell 88E6052.. but the FCC image shows the device with an ADMtek Switch.

The default IP for this device is from the FCC manual.

The default SSID may be default.

Links of Interest

Firmware v1109 (via archive.org)