Senao WBR2100AFN
From TechInfoDepot
Jump to navigationJump to searchbgn (N300) | |||||||
|---|---|---|---|---|---|---|---|
| wireless router | |||||||
| 3rd Party Firmware | |||||||
| dd-wrt | |||||||
| OpenWrt |
Incompatible | ||||||
| Tomato any flavor |
Incompatible | ||||||
| Platform | |||||||
| Brand • Model • Rev |
Senao WBR2100AFN | ||||||
| FCC ID | |||||||
| IC ID | |||||||
| Type |
wireless router | ||||||
| CPU1 |
Atheros AR1321 | ||||||
| CPU1 Type |
MIPS 74Kc | ||||||
| CPU1 Speed |
not specified | ||||||
| Flash1 Chip |
Eon Q32B-104HIP | ||||||
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||||
| RAM1 Size |
? MiB | ||||||
| RAM1 Chip |
Brand? Model? | ||||||
| ETH chip1 |
Atheros AR1321 | ||||||
| Switch |
Atheros AR1321 | ||||||
| Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN | ||||||
| Wired Standard |
IEEE 802.3i/3u | ||||||
|
802dot11 OUI: none specified | |||||||
| Expansion IF types |
none specified | ||||||
| Power |
5 VDC, 1 A | ||||||
| Connector type |
barrel | ||||||
| Other | |||||||
|
Default IP address: 192.168.0.1 | |||||||
| Manuf/OEM/ODM | |||||||
| Retail | |||||||
| FCC approval date | 20 February 2013 | ||||||
| Country of manuf | Taiwan | ||||||
| Radio 1 | |||||||
| Chip1 |
Atheros AR1321 | ||||||
| Wireless interface OUI |
none specified | ||||||
| Antenna Connector Type |
none specified | ||||||
| MIMO status |
2x2:2 | ||||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||||
| 802.11n |
up to 300 Mbps | ||||||
| 802.11g |
up to 54 Mbps | ||||||
| 802.11b |
up to 11 Mbps | ||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||
| |||||||
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Senao device with specifications, see Senao.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
"7016A056000f" is silkscreened on the board in the FCC photos.
The device, per the FCC photos, seems to be using the following...
Default credentials are per the FCC manual.
- The default SSID pattern shown in the manual is EnGeniusXXXXXX.
