SMC SMCWBR14-G

bg (G54)
Barricade g 2.4GHz 54Mbps Wireless Broadband Router
WikiDevi.wi-cat.ru	SMC SMCWBR14-G
3rd Party Firmware
dd-wrt	Incompatible
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	SMC SMCWBR14-G
FCC ID	RAXWG4005D01-17
IC ID	4711A-WG4005DS
Type	wireless router
CPU1	Intersil ISL3893
CPU1 Type	ARM946E
CPU1 Speed	not specified
Flash1 Chip	Macronix MX29LV160BBTC-90
Flash1 Size	2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Size	8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Chip	ICSI IC42S16400-7T
ETH chip1	Intersil ISL3893
Switch	ADMtek ADM6996LC
Ethernet Port Count	1-WAN 4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: 00:13:F7 (3 E, 13 W) Ethernet OUI: 00:13:F7 (3 E, 13 W)
Stock bootloader	ISL Rescueing Boot 0.5.1.0
Stock FW OS	Nucleus RTOS
Expansion IF types	none specified
Power	9 VDC, 1 A
Connector type	barrel
Serial Port (UART)	yes, internal, 10-pin header, Arcadyan type1 pinout, (115200 8N1), J4, populated, 3.3V TTL
Additional chips 5GHz VCO;Intersil;ISL3084IR;3084IR, N537FK;1; 1.5A, DC/DC regulator;ANPEC;APW34063;APW34063, GG22U;1; Hex Schmitt-Trigger Inverter;Texas Instruments;SN54LVC14A;52C2R4K, LVC14A;1;
Other
Default SSID: SMC (9 addl. devices) Default IP address: 192.168.2.1 the IP 192.168.2.1 is used by 297 additional devices of which 31 are SMC devices Default login user: blank Default login password: smcadmin blank:smcadmin credentials used by 11 additional devices of which 11 are SMC devices
Manuf/OEM/ODM	Arcadyan WG4005D-17
Retail
FCC approval date	15 December 2004
UPC	662698582192 (UPC DB, On eBay)
ASIN	B0007U0IAU
Country of manuf	China
Radio 1
Chip1	Intersil ISL3893
Chip2	Intersil ISL3686B
Wireless interface OUI	00:13:F7
Antenna Connector Type	RP-SMA
Wireless Standard	IEEE 802.11b/g
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented ADMtek chipsets with specifications, see ADMtek.
For a list of all currently documented Intersil chipsets with specifications, see Intersil.

For a list of all currently documented SMC device with specifications, see SMC.

• 54 Mbps - 2.4GHz 802.11g = G54 class

Overview

"P/N: 14100520010J REV: 01" and "MADE IN TAIWAN" is silkscreened on the top of the board of the unit populating this entry.

A date code of 0536 (September 2005) is silkscreened on the bottom of the board.

A mixture of (mostly) Rubycon (power side), Chemi-Con, and Wendell branded radial capacitors are in use.

A label reading IC9-17, V1.00.024 was affixed to the Flash before removal.

This device would seem to be using the Nucleus RTOS.

Links of Interest

• On the UNIMOS Wiki

JTAG-Serial Info

Serial

Serial Pinouts

The used pinout is somewhat commonly used by other Arcadyan devices..

(GND) (   ) (TxD) (RxD) [   ]
(3.3) (   ) (   ) (   ) (   )
                          J4

|                      -------> to likely JTAG
|
v LEDs

Info derived from

boot log

Rescueing Boot for the ISL3893, version 0.5.1.0 Copyright (C) 1993-2002 Intersil Americas Inc. All Rights Reserved. MAC Address: 00.13.f7.09.89.d6 Forcing soft reset from Bootloader▒ Rescueing Boot for the ISL3893, version 0.5.1.0 Copyright (C) 1993-2002 Intersil Americas Inc. All Rights Reserved. MAC Address: 00.13.f7.09.89.d6 Boot: start searching for image... Found Boot: Checking Image CRC32... Okay. Disable PORT 0 NetMall System Boot Copyright 2003 Accton, Inc. CPU: Intersil ISL3893 Processor POST Version: 0.00.08 Creation Date: 2004.09.07 Press <space> key three times to stop auto-boot... 0 Verifying product code......PASS Boot Product Code!!! Reg0x00 = 0xFFFF Reg0x01 = 0x880F Reg0x02 = 0x0000 Reg0x03 = 0x840F Reg0x04 = 0x0000 Reg0x05 = 0x840F Reg0x06 = 0x0000 Reg0x07 = 0x840F Reg0x08 = 0x840F Reg0x09 = 0x881F Reg0x0A = 0x5802 Reg0x0B = 0x8001 Reg0x0C = 0x0000 Reg0x0D = 0x0000 Reg0x0E = 0xFA50 Reg0x0F = 0xFA50 Reg0x10 = 0x0040 Reg0x11 = 0xE320 Reg0x12 = 0x3600 Reg0x13 = 0x01D5 Reg0x14 = 0x01D4 Reg0x15 = 0x0101 Reg0x16 = 0x01D5 Reg0x17 = 0x01D5 Reg0x18 = 0x01D5 Reg0x19 = 0xFFD5 Reg0x1A = 0xFFD5 Reg0x1B = 0xFFD5 Reg0x1C = 0xFFD5 Reg0x1D = 0xFFD5 Reg0x1E = 0xFFD5 Reg0x1F = 0xFFD5 Reg0x20 = 0x81D5 Reg0x21 = 0xFFD5 Reg0x22 = 0xFFD5 OID_CTRL_SetFrequency: New channel is 3 ! OID_CTRL_SetSSID: Ne Crash log handle begin:007C0048 w SSID is 'ISL3893_11G' ! wlanSetSSIDBrdCast: Hide real SSID! OID_CTRL_SetNitroMode: set value = 1000 OID_CTRL_SetSTATimout: set value = 600 DHCPC:DHCP Client Started. DHCPS:DHCP Server Started. ========================================================================== WG4005D-17 project: Command Line Interface. v.1.00.024 2004.1215 MVC version: V1.0.2.1 ========================================================================== cmd> ap_cfg_Init: ap_cfg.wireless_mode_admin = 2 ap_cfg_SetwirelessModeAdmin: admin = 2 OID_CTRL_SetSSID: New SSID is 'SMC' ! OID_CTRL_SetSSID: New SSID is 'SMC' ! wlanSetSSIDBrdCast: Show real SSID! WLAN_IfStop: device state is 2 ,type is 1! WLAN_IfStop: Device already running! wlanReset: Device already running! OID_CTRL_SetFrequency: New channel is 6 ! OID_CTRL_SetSSID: New SSID is 'SMC' ! OID_CTRL_SetSSID: New SSID is 'SMC' ! wlanSetSSIDBrdCast: Show real SSID! OID_CTRL_SetNitroMode: set value = 1000 OID_CTRL_SetSTATimout: set value = 600 add listen port Discovery >> Success to get if addr = 102a8c0 arp_rtrequest: bad gateway value >> Discovery Serial NO = ... >> Discovery Serial NO = S540006875 ... Discovery >> Ready to be discovered

shell help

cmd> help Command Line Interface v0.01 ====================================================== rmem : Read memory. Usage : rmem <Address> [Num of Words] wmem : Write memory. Usage : wmem <Address> <Data0> [Data1] ... [Data7] rmi : read mii phy register. Usage : rmi <phy addr> <reg> wmi : write mii phy register. Usage : wmi <phy addr> <reg> <Data> time : Get current system time. Usage : time settime : Set system time. Usage : settime <hh:mm:ss> [yy/mm/dd] [TZ(GMT +/- hour)] help : List all commands. Usage : help mkdir : Make directories. Usage : mkdir <dir> create : Create files. Usage : create <file> cat : Concatenate files. Usage : cat <file> ls : List directory contents. Usage : ls [dir] rm : Remove files. Usage : rm <file> rmdir : Remove directories. Usage : rmdir <DIRECTORY> copy : Copy files. Usage : copy <source> <destination> nvclear : Clear all of the NVFS files. Usage : nvclear routeShow : Show Route. Usage : routeShow routeAdd : Add Route. Usage : routeAdd <dest> <mask> <gateway> routeDel : Del Route. Usage : routeDel <dest> <mask> <gateway> routeModify: Modify Route. Usage : routeModify <index> <dest> <mask> <gateway> defaultRouteSet: Set Route Status. Usage : defaultRouteSet <mode : 1|2 = enable|disable> defaultRouteGet: Get Route Status. Usage : defaultRouteGet mbufShow : Show Mbuf statistics. Usage : mbufShow ifShow : Dispaly network interface. Usage : ifShow <ifname> ifAllShow : Dispaly all network interface. Usage : ifAllShow taskShow : Show Task informations. Usage : taskShow semShow : Show Semaphore informations. Usage : semShow timerShow : Show Timer informations. Usage : timerShow memShow : Show memory pool informations. Usage : memShow msgqShow : Show message queue informations. Usage : msgqShow eventShow : Show event group informations. Usage : eventShow knlShow : Show kernel resource informations. Usage : knlShow ipConfig : Configure interface address and subnet mask. Usage : ipConfig [ifname] [ip] [subnet mask] ipStatus : Change IP status. 1 for Enabled, 2 for Disabled.. Usage : ipStatus [ifname] [status] ipAdd : Add alias IP address.. Usage : ipAdd [ifname] [ip] [netmask] ipDel : Delete alias IP address.. Usage : ipAdd [ifname] [ip] [netmask] ethmib : Show/Reset ethernet port MIB counters. Usage : ethmib [reset] arpAdd : Add an ARP entry to ARP table.. Usage : arpAdd [ip] <Ethernet Address> arpDel : Delete an ARP entry.. Usage : arpDel [ip] arpGet : Get the hardware address of a specify IP.. Usage : arpGet [ip] arpFlush : Flush ARP table.. Usage : arpFlush [ifname] ping : Ping a host.. Usage : ping [ip] [ms] dhcpcRelease: Release the IP address for the specified interface.. Usage : dhcpcRelease [ifname] dhcpcRenew: Renew the IP address for the specified interface.. Usage : dhcpcRenew [ifname] dhcpcLog : Show dhcpclog.. Usage : dhcpcLog dhcpcLogTest: Test dhcpclog.. Usage : dhcpcLogTest [line_num] dhcpsStart: Start DHCP Server.. Usage : dhcpsStart dhcpsStop : Stop DHCP Server.. Usage : dhcpsStop dhcpsAddIp: Add static IP to the DHCP server. Usage : dhcpsAddIp [mac(00-00-00-00-00-00)] [ip(xxx.xxx.xxx.xxx)] dhcpsDelIp: Delete static IP from the DHCP server. Usage : dhcpsDelIp [ip(xxx.xxx.xxx.xxx)] dhcpsBindingNum: Print binding number of the DHCP server. Usage : dhcpsBindingNum dhcpsShowStatic: Print static IP of the DHCP server. Usage : dhcpsShowStatic natShow : Show NAT link table information. Usage : natShow triggerPort: Set trigger port, when public port num is 0 will delete this entry.. Usage : triggerPort [index] [port] <protocol> [public port num] [start] [end] [protocol].... triggerShow: Show trigger port information. Usage : triggerShow gethostbyname: gethostbyname. Usage : gethostbyname tftpc : TFTP client. Usage : tftpc <GET|PUT> <host> <remotename> <localname> tftps : Start TFTP server. Usage : tftps [dir] [timeout] update : Update runtime code (need to download image file "download" to /tmp). Usage : update setAccessHost: Add/delete access host. Usage : setAccessHost [NET(xx.xx.xx.xx)] [MASK (xx.xx.xx.xx)] <index> accessHostShow: Show access host information. Usage : accessHostShow ripStart : Enable RIP . Usage : ripStart [version] ripStop : Disable RIP . Usage : ripStop ripShow : Show RIP table . Usage : ripShow ripShow2 : Show RIP table 2 . Usage : ripShow2 testMD5 : Test MD5. Usage : testMD5 ripSet : Set RIP status ,receiveMode ,and sendMode. Usage : ripSet [status(1|2 = Enable|Disable] [sendMode(1|2|3|4 = RipV1|RipV2|RipV1Compatible|Disable)] [receiveMode(1|2|3|4 = RipV1|RipV2|RipV1Compatible|Disable)] ripDebug : Set RIP debug mode. Usage : ripDebug mode(1|0 = enable|disable) apstate : Show AP statistics. Usage : apstate [0: stop|1: start] netdbg : Switch network debug mode. Usage : netdbg neterrcnt : Show network error count. Usage : neterrcnt setmode : set bridge mode or routing mode. Usage : setmode setnitro : set Nitro mode. Usage : setnitro setnonerp : set protection mode. Usage : setnonerp wsBasic : set Basic Rate(1~14). Usage : wsBasic wsTxrate : set Tx Rate(1~13). Usage : wsTxrate wgTxrate : get Tx Rate. Usage : wgTxrate init6996 : initial ADM6996. Usage : init6996 readreg : Read ADM6996 Reg. Usage : ReadReg clkhi : Set Clock HI . Usage : clkhi clklow : Set Clock Low. Usage : clklow URLHashTableShow: Show URL Hash Table. Usage : URLHashTableShow wsssid : set ssid. Usage : wsssid ssid wsossid : set override-ssid. Usage : wsossid [ossid] wgssid : get ssid. Usage : wgssid wsch : set channel. Usage : wsch channel wgch : get channel. Usage : wgch wsfreq : set channel-Freq. Usage : wsfreq channel wgstaall : get associated STA info. Usage : wgstaall wgstaone : get associated STA info by index. Usage : wgstaone <index> wgsta : get STA info by index. Usage : wgsta <index> wgrate : get rates. Usage : wgrates wsprofile : set profile. Usage : set profile_num wshowbss : show all bss. Usage : wshowbss wshowmib : show wireless mib. Usage : wshowmib wshowwep : show device wep. Usage : wshowwep wgbssmax : get bss num. Usage : wgbssmax wgstamax : get sta num. Usage : wgstamax wspreamble: set preamble. Usage : wspreamble <preamble> wsmaxpow : set RF output power by channel. Usage : wsmaxpow <channel> <power> wgmaxpow : Get RF output power by channel. Usage : wgmaxpow wsantdiv : Set antenna diversity. Usage : wsantdiv <antenna diversity> wgantdiv : Show antenna diversity. Usage : wgantdiv wgpsm : get power save mode. Usage : wgpsm wspsm : set power save mode. Usage : wspsm <a(active),p(powersave),d(dynamic)> wswds : set wds link. Usage : wswds <> wsrmwds : remove wds link. Usage : wsrmwds <> wsaddwds : add wds link. Usage : wsaddwds wsdelwds : del wds link. Usage : wsdelwds wggetwds : get wds link. Usage : wggetwds wgwdslink : get wdslink on/off. Usage : wgwdslink wswdslink : set wdslink on/off. Usage : wswdslink wgscaninterval: get scan interval . Usage : wgscaninterval wsscaninterval: set scan interval . Usage : wsscaninterval <interval> wgallwds : all wds on air . Usage : wgallwds setdevstate: set wlan state. Usage : setdevstate <h,s,r> wds_init : Init wds. Usage : wds_init wpagetmode: get wpa mode. Usage : wpagetmode wpasetmode: set wpa mode. Usage : wpasetmode [0:disable][1:enable_manual][2:enable_passphrase] wpagetmkey: get manual key. Usage : wpagetmkey wpasetmkey: set manual key. Usage : wpasetmkey <manual key> wpagetakey: set pass-phrase str. Usage : wpagetakey wpasetakey: set pass-phrase str. Usage : wpasetakey <ascii key> wpashowc : show all wpa client. Usage : wpashowc wpagetgkupdate: get wpa group key update times. Usage : wpagetgkupdate wpasetgkupdate: set wpa group key update times. Usage : wpasetgkupdate <count> wpasetnomicerror: set wpa no mic error value. Usage : wpasetnomicerror [0:handle mic error][1:do not handle mic error] memCheck : check dynamic memory pool. Usage : memCheck crashlogprint: Print crash logs. Usage : crashlogprinf delshiparea: Delete Shipping Area Setting. Usage : delshiparea r6996s : Read ADM6996 serial register. Usage : r6996s [address] r6996E : Read ADM6996 EEPROM register. Usage : r6996E [address] w6996E : Write ADM6996 EEPROM register. Usage : w6996E [address] [data] wr6996E : Write and Read ADM6996 EEPROM register. Usage : wr6996E [address] [data] radiusget : get radius info. Usage : radiusget <index> radiusset : set radius info. Usage : radiusset <index> <ip> <port> <secret> <nas id> dot1xmodeset: set dot1x mode. Usage : dot1xmodeset <mode> dot1xidleset: set dot1x idle session timeout. Usage : dot1xidleset <timeout value> dot1xreauthset: set dot1x re-authentication period. Usage : dot1xreauthset <period time> dot1xquietset: set dot1x quiet period. Usage : dot1xquietset <period time> dot1xsummary: get dot1x setting summary. Usage : dot1xsummary dot1xshowauth: show dot1x auth pool. Usage : dot1xshowauth

files

cmd> ls D nv D dev D tmp D etc 4 File(s) 0 bytes cmd> ls /etc F 22 resolv.conf 1 File(s) 22 bytes cmd> ls /tmp F 16384 eventlog F 16384 dhcpclog F 524288 download 3 File(s) 557056 bytes cmd> ls /nv F 20 mode_cfg F 85 download_cfg F 1539 user F 428 ddns_dyndns F 212 ddns_tzo F 196 ddns_noip F 140 ddns_dyncom F 16 time_zone_cfg F 72 sntpc_cfg F 12 usr_time F 224 ip_cfg F 44 dns_relay_cfg F 1132 pppoecfg F 72 dhcpc_cfg F 43 nat_cfg F 320 nat_cfg_masq F 920 nat_cfg_rd F 3150 nat_cfg_vs F 72 nat_cfg_dmz F 1900 nat_cfg_trg F 328 route_cfg F 284 dhcps F 152 dhcpsblk F 3810 dhcpsstls F 28 firewall_cfg F 4 ip_defense_cfg F 204 ip_filter_cfg F 8 http_cfg F 32 access_host_cfg F 620 pptpcfg F 272 ethftr_cfg F 196 mail_cfg F 608 usr_dot1x_cfg F 32 admin_cfg F 136 bpa_login_cfg F 48 ip_bootup F 4 usr_wan_ping F 1204 urlblocking_cfg F 4 usr_country_cfg F 588 ap_cfg F 244 wdslink_cfg F 4 usr_filter F 760 usr_schrule F 780 usr_accessctrl F 1200 usr_blocking F 120 dstiprule_cfg F 260 cnnctrl_cfg F 260 assctrl_cfg F 12 alldmz_cfg F 58 upnp_cfg F 32 usrsvs_cfg F 96 usr_sandbox_cfg F 4 usr_wizard_cfg F 40 cso_cfg F 28 usr_syslog_cfg F 4 usr_ddnsp 56 File(s) 23061 bytes cmd> ls /dev F 0 flash0 F 0 uart0 2 File(s) 0 bytes

semShow

cmd> semShow Semaphore Table List ------------------------------------------------------- Name Type Count TasksWaitting ======================================================= 0. MFS_SEM FIFO 1 0 1. netSem FIFO 0 1 2. netTime FIFO 1 0 3. splSem FIFO 1 0 4. hosttbl FIFO 1 0 5. mblksem PRIORITY 1 0 6. mclsem PRIORITY 1 0 7. FLSH FIFO 1 0 8. sio_Rx0 FIFO 0 0 9. sio_RT0 FIFO 1 0 10. NVRAM FIFO 1 0 11. modecfg FIFO 1 0 12. CrashLo FIFO 1 0 13. eventLo FIFO 1 0 14. downloa FIFO 1 0 15. user_cf FIFO 1 0 16. ddns_dy FIFO 1 0 17. ddns_tz FIFO 1 0 18. ddns_no FIFO 1 0 19. ddns_dy FIFO 1 0 20. time_zo FIFO 1 0 21. sntpc_c FIFO 1 0 22. usrtime FIFO 1 0 23. ip_cfg FIFO 1 0 24. dns_rel FIFO 1 0 25. pppoe_c FIFO 1 0 26. dhcpc_c FIFO 1 0 27. dhcpcLo FIFO 1 0 28. DhcpcSe FIFO 1 0 29. dhcpcMu FIFO 1 0 30. dhcpcEv FIFO 1 0 31. dhcp_ti FIFO 1 0 32. leaseSe FIFO 1 0 33. nat_cfg FIFO 1 0 34. port_ma FIFO 1 0 35. route_c FIFO 1 0 36. dhcps_c FIFO 1 0 37. ip_fire FIFO 1 0 38. ip_defe FIFO 1 0 39. ip_filt FIFO 1 0 40. http_cf FIFO 1 0 41. access_ FIFO 1 0 42. pptp_cf FIFO 1 0 43. ethftr_ FIFO 1 0 44. mail_cf FIFO 1 0 45. usr_dot FIFO 1 0 46. admin_c FIFO 1 0 47. bpa_log FIFO 1 0 48. ip_boot FIFO 1 0 49. usr_wan FIFO 1 0 -------------------------------------------------------

ifShow

cmd> ifShow lo (unit number 0): Flags: (0x8069) UP LOOPBACK MULTICAST ARP RUNNING Type: SOFTWARE_LOOPBACK Internet address: 127.0.0.1 Netmask 0xff000000 Subnetmask 0xff000000 Metric is 0 Maximum Transfer Unit size is 1536 0 packets received; 0 packets sent 0 multicast packets received 0 multicast packets sent 0 input errors; 0 output errors 0 collisions; 0 dropped adm (unit number 0): Flags: (0x9963) UP BROADCAST MULTICAST PROMISCUOUS ARP RUNNING Type: ETHERNET_CSMACD Internet address: 192.168.2.1 Broadcast address: 192.168.2.255 Netmask 0xffffff00 Subnetmask 0xffffff00 Ethernet address is 00:13:f7:09:89:d6 Metric is 0 Maximum Transfer Unit size is 1500 0 packets received; 2 packets sent 0 multicast packets received 2 multicast packets sent 0 input errors; 0 output errors 0 collisions; 0 dropped adm (unit number 1): Flags: (0x8963) UP BROADCAST MULTICAST PROMISCUOUS ARP RUNNING Type: ETHERNET_CSMACD Netmask 0xe52de004 Subnetmask 0xa000360 Ethernet address is 00:13:f7:09:89:d7 Metric is 0 Maximum Transfer Unit size is 1500 0 packets received; 10 packets sent 0 multicast packets received 0 multicast packets sent 0 input errors; 0 output errors 0 collisions; 0 dropped adm (unit number 2): Flags: (0x8963) UP BROADCAST MULTICAST PROMISCUOUS ARP RUNNING Type: ETHERNET_CSMACD Netmask 0xe52de004 Subnetmask 0xa000360 Ethernet address is 00:13:f7:09:89:d6 Metric is 0 Maximum Transfer Unit size is 1500 0 packets received; 2 packets sent 0 multicast packets received 2 multicast packets sent 0 input errors; 0 output errors 0 collisions; 0 dropped

memShow

cmd> memShow

Memory Pool List
--------------------------------------------------------------------------
   Name            StartAddr  Size  MinAlloc Available    Type TasksWaiting
===========================================================================
0. KenMem          0x3AB7EC   1835008   48      549688    FIFO          0
1. FileMem         0x56B86C   1179648   48      144       FIFO          0
2. SysMem          0x68B8EC   1197844   48      961976    FIFO          0
---------------------------------------------------------------------------

knlShow

cmd> knlShow Task Table List ------------------------------------------------- Name Priority Status ================================================= 0. KnlTask 0 QUEUE_SUSPEND 1. tNetTas 50 SEMAPHORE_SUSPEND 2. tNvTask 100 SLEEP_SUSPEND 3. ddns 100 QUEUE_SUSPEND 4. tSntpc 100 SLEEP_SUSPEND 5. tDnsPro 99 SEMAPHORE_SUSPEND 6. tDhcpcT 100 QUEUE_SUSPEND 7. tDhcpsT 100 QUEUE_SUSPEND 8. tHttpD 99 SEMAPHORE_SUSPEND 9. tHtpTsk 99 QUEUE_SUSPEND 10. clitask 5 READY 11. MailD 100 SLEEP_SUSPEND 12. tFpi 100 SLEEP_SUSPEND 13. tDot1x 100 SLEEP_SUSPEND 14. tDiscov 100 SEMAPHORE_SUSPEND ------------------------------------------------- Memory Pool List -------------------------------------------------------------------------- Name StartAddr Size MinAlloc Available Type TasksWaiting =========================================================================== 0. KenMem 0x3AB7EC 1835008 48 549688 FIFO 0 1. FileMem 0x56B86C 1179648 48 144 FIFO 0 2. SysMem 0x68B8EC 1197844 48 961976 FIFO 0 --------------------------------------------------------------------------- Semaphore Table List ------------------------------------------------------- Name Type Count TasksWaitting ======================================================= 0. MFS_SEM FIFO 1 0 1. netSem FIFO 0 0 2. netTime FIFO 1 0 3. splSem FIFO 1 0 4. hosttbl FIFO 1 0 5. mblksem PRIORITY 1 0 6. mclsem PRIORITY 1 0 7. FLSH FIFO 1 0 8. sio_Rx0 FIFO 0 0 9. sio_RT0 FIFO 1 0 10. NVRAM FIFO 1 0 11. modecfg FIFO 1 0 12. CrashLo FIFO 1 0 13. eventLo FIFO 1 0 14. downloa FIFO 1 0 15. user_cf FIFO 1 0 16. ddns_dy FIFO 1 0 17. ddns_tz FIFO 1 0 18. ddns_no FIFO 1 0 19. ddns_dy FIFO 1 0 20. time_zo FIFO 1 0 21. sntpc_c FIFO 1 0 22. usrtime FIFO 1 0 23. ip_cfg FIFO 1 0 24. dns_rel FIFO 1 0 25. pppoe_c FIFO 1 0 26. dhcpc_c FIFO 1 0 27. dhcpcLo FIFO 1 0 28. DhcpcSe FIFO 1 0 29. dhcpcMu FIFO 1 0 30. dhcpcEv FIFO 1 0 31. dhcp_ti FIFO 1 0 32. leaseSe FIFO 1 0 33. nat_cfg FIFO 1 0 34. port_ma FIFO 1 0 35. route_c FIFO 1 0 36. dhcps_c FIFO 1 0 37. ip_fire FIFO 1 0 38. ip_defe FIFO 1 0 39. ip_filt FIFO 1 0 40. http_cf FIFO 1 0 41. access_ FIFO 1 0 42. pptp_cf FIFO 1 0 43. ethftr_ FIFO 1 0 44. mail_cf FIFO 1 0 45. usr_dot FIFO 1 0 46. admin_c FIFO 1 0 47. bpa_log FIFO 1 0 48. ip_boot FIFO 1 0 49. usr_wan FIFO 1 0 ------------------------------------------------------- Timer Table List ------------------------------------------------------- Name Status InitialTime Expirations ======================================================= 0. t0 Enable 98 0 1. t1 Disable 19 1 2. t2 Enable 49 0 3. tsysClk Enable 1 0 4. t3 Enable 98 0 5. t4 Enable 5880 0 6. t5 Disable 1 1 7. t6 Enable 6272 0 8. t7 Enable 58800 0 9. SelTime Enable 5 0 10. SelTime Enable 2 0 ------------------------------------------------------- Message queue List -------------------------------------------------------------------------- Name StartAddr Size Available Suspend TasksWaiting =========================================================================== 0. KnlQueu 0x68EA00 10 10 FIFO 1 1. netq 0x68EADC 100 99 FIFO 0 2. ddnsd 0x6965A8 10 10 FIFO 1 3. sntpc 0x699EF0 1 1 FIFO 0 4. dnsprox 0x69C2D4 10 10 FIFO 0 5. dhcpEve 0x69F288 10 10 FIFO 1 6. dhcpsEv 0x6A4CDC 10 10 FIFO 1 7. httpdq 0x6A76AC 10 10 FIFO 0 8. httpd 0x6A7808 10 10 FIFO 1 9. maild 0x6AE474 10 10 FIFO 0 --------------------------------------------------------------------------- Event Group List -------------------------------------------- Name Flag tasksWaiting ============================================= -----------------------------------------------

timerShow

cmd> timerShow

Timer Table List
-------------------------------------------------------
   Name            Status    InitialTime Expirations
=======================================================
0. t0              Enable    98         0
1. t1              Disable   19         1
2. t2              Enable    49         0
3. tsysClk         Enable    1          0
4. t3              Enable    98         0
5. t4              Enable    5880       0
6. t5              Enable    1          0
7. t6              Enable    6272       0
8. t7              Enable    58800      0
9. SelTime         Enable    5          0
10. SelTime         Enable    2          0
-------------------------------------------------------

taskShow

cmd> taskShow

Task Table List
-------------------------------------------------
   Name            Priority         Status
=================================================
0. KnlTask         0        QUEUE_SUSPEND
1. tNetTas         50       READY
2. tNvTask         100      SLEEP_SUSPEND
3. ddns            100      QUEUE_SUSPEND
4. tSntpc          100      READY
5. tDnsPro         99       SEMAPHORE_SUSPEND
6. tDhcpcT         100      QUEUE_SUSPEND
7. tDhcpsT         100      QUEUE_SUSPEND
8. tHttpD          99       SEMAPHORE_SUSPEND
9. tHtpTsk         99       QUEUE_SUSPEND
10. clitask         5        READY
11. MailD           100      READY
12. tFpi            100      READY
13. tDot1x          100      SLEEP_SUSPEND
14. tDiscov         100      SEMAPHORE_SUSPEND
-------------------------------------------------