ReadyNet WR300NQ

bgn (N300)
wireless router
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	ReadyNet WR300NQ
FCC ID	Y2PWR300NQ
Type	wireless router
CPU1	Realtek Model?
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Brand? Model?
ETH chip1	Realtek Model?
Switch	Realtek Model?
Ethernet Port Count	1-100MbE-WAN 4-100MbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: none specified
Expansion IF types	none specified
Other
Default IP address: 192.168.1.1 the IP 192.168.1.1 is used by 1324 additional devices of which 0 are ReadyNet devices Default login user: admin Default login password: admin admin:admin credentials used by 1342 additional devices of which 1 are ReadyNet devices
Retail
FCC approval date	16 May 2011
Country of manuf	China
Radio 1
Chip1	Realtek Model?
Wireless interface OUI	none specified
Antenna Connector Type	none specified
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

The manual has 11NRouter2T2R as the SSID in the SSID field and specifies the SSID as WR300NQ in the text under it. WiGLE support exists for the SSID pattern of WR300NQ_XXXXXX where XXXXXX is the last three octets of the wireless interface MAC (lower case letters).

The FCC photos have a MAC label on the back of the device w/ a 00:0A:EB (TP-LINK) OUI.

"WR932_C1.2" and "2010-12-10" is silkscreened on the board in the FCC photos.

Links of Interest

Manual