Radxa Rock Pi E v3.0
From TechInfoDepot
Jump to navigationJump to search| Single Board Computer | |
 | |
| 3rd Party Firmware | |
|---|---|
| dd-wrt |
Status Unknown |
| OpenWrt | |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Radxa Rock Pi E v3.0 |
| Type |
single-board computer |
| CPU1 |
Rockchip RK3328 |
| CPU1 Speed |
1.3 GHz ( 4 cores ) |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
? MiB (eMMC) |
| RAM1 Size |
2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
Brand? Model? |
| Ethernet Port Count |
1-1GbE-WAN 1-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u/3ab |
|
| |
| Expansion IF types |
microSDXC, eMMC, USB 3.0 |
| USB ports |
1 |
| SD/MMC Slots |
1 |
| USB Hub Compatible |
Untested |
| Serial Port (UART) |
yes |
|
Flags: PoE | |
| Other | |
|
| |
| 3rd Party Firmware Support | |
For a list of all currently documented Rockchip SoC's with specifications, see Rockchip.
For a list of all currently documented Radxa device with specifications, see Radxa.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
| Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: rockchip
OpenWrt Subtarget: armv8
OpenWrt Package architecture: aarch64_generic
Support started version: ?
Current supported version: snapshot
Comment:
PoE suported on 1Gbit port with optional hat
OpenWrt Target: rockchip
OpenWrt Subtarget: armv8
OpenWrt Package architecture: aarch64_generic
Support started version: ?
Current supported version: snapshot
Comment:
PoE suported on 1Gbit port with optional hat
WLAN is optional along with BT 4.2
Please insert instructions here
