QNAP TS-421U
4-Bay Business Ready Rack Mount NAS Server with iSCSI | |
Homepage | |
---|---|
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt |
Status Unknown |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
QNAP TS-421U |
Type |
NAS enclosure |
CPU1 |
Marvell 88F6282 |
CPU1 Type |
ARMv5 |
CPU1 Speed |
2.0 GHz 32-bit |
Flash1 Chip |
Micron N25Q128A |
Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Size |
1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (DDR3 SDRAM) |
RAM1 Chip |
Micron MT41K256M8DA-125 x 4 |
ETH chip1 |
Marvell 88F6282 |
ETH chip2 |
Marvell 88E1318 |
ETH chip3 |
Marvell 88E1318 |
Ethernet Port Count |
2-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
Expansion IF types |
SATA II, eSATA, USB 3.0, USB 2.0 |
USB ports |
4 |
SATA Ports |
4 |
eSATA Ports |
2 |
USB Hub Compatible |
Untested |
Power |
100-240 VAC ~ 47/63 Hz, 3.5 A |
Connector type |
C13 |
Serial Port (UART) |
yes, 4-pin header, populated, 3.3V TTL, (115200 8N1), CN4 |
Flags: RTC w/ battery, eSATA, buzzer, power switch, fan, heatsink, metal case, WoL, SNMP, Link aggregation | |
Additional chips | |
Other | |
Default IP address: 169.254.100.100 | |
3rd Party Firmware Support | |
Retail | |
Availability | End of Life |
End of Life date | 01 October 2022 |
(Est.) release date | April 2013 |
ASIN | B00C2ANPFS |
Country of manuf | Taiwan |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented QNAP device with specifications, see QNAP.
Overview
"TS-420U", "TS-421U" and "QV08 V2.1" are silkscreened on the main board.
- "FKN-20106-A00267-YS-RS", "TS-419UII BP" and "QU89 V2.0" are silkscreened on the SATA board.
Hardware specification
- CPU: Marvell 88F6282 @2GHz (Kirkwood ARM V5)
- Memory: 1GB (SDRAM) DDR3
- Storage: 16MB Flash, 4x SATA II, 2x eSATA
- Network: 2x Gigabit Ethernet port
- USB: 2x USB 3.0 Type A, 2x USB 2.0 Type A
- Power: 120-240V AC via C13