Phicomm KE 2P
From TechInfoDepot
Jump to navigationJump to searchabgn+ac (AC1300) | |
---|---|
AC1300 Dual Band Gigabit Router | |
Homepage | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Phicomm KE 2P |
FCC ID | |
Type |
wireless router |
CPU1 | |
CPU1 Type |
MIPS 1004Kc |
CPU1 Speed |
880 MHz ( 2 cores ) 16-bit |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
RAM1 Chip |
EtronTech Model? |
ETH chip1 | |
Switch | |
Ethernet Port Count |
1-1GbE-WAN 4-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot |
Expansion IF types |
none specified |
Power |
12 VDC, 1.5 A |
Serial Port (UART) |
yes, , 3.3, (57600 8N1) |
Flags: 256QAM, metal housing | |
Other | |
| |
3rd Party Firmware Support | |
Retail | |
FCC approval date | 23 December 2017 |
Country of manuf | China |
Radio 1 | |
Chip1 |
MediaTek MT7615DN |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11a/n/ac |
802.11ac |
up to 867 Mbps |
802.11n |
up to 300 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
Radio 2 | |
Chip1 |
MediaTek MT7615DN |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n |
N-QAM |
up to 400 Mbps |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Phicomm device with specifications, see Phicomm.
Overview
"800002393 V2.1" is silkscreened on the board in the FCC photos.
A single MediaTek MT7615DN chip serves as both the 2.4GHz and 5GHz radios.
- Web GUI: http://p.to
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: mt7621
OpenWrt Package architecture: mipsel_24kc
Support started version: 18.06.0
Current supported version: 23.05.5
Unsupported Functions:
Concurrent 2.4GHz and 5GHz WiFi
On the OpenWrt Wiki
OpenWrt Target: ramips
OpenWrt Subtarget: mt7621
OpenWrt Package architecture: mipsel_24kc
Support started version: 18.06.0
Current supported version: 23.05.5
Unsupported Functions:
Concurrent 2.4GHz and 5GHz WiFi
Please insert instructions here
See also
Categories:
- Phicomm
- Embedded system/wireless router
- Embedded System MediaTek
- Embedded System MT7621AT
- MediaTek
- Embedded System MIPS 1004Kc
- Embedded System
- OpenWrt Supported
- Embedded System MT7615DN
- Has Mimo Status
- Embedded System IEEE 802.11a/n/ac
- Embedded System IEEE 802.11b/g/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation