PRO-NETS WR850RL
bgn (N300) | |||||
|---|---|---|---|---|---|
| wireless router | |||||
| 3rd Party Firmware | |||||
| dd-wrt |
Status Unknown | ||||
| OpenWrt |
Status Unknown | ||||
| Tomato any flavor |
Incompatible | ||||
| Platform | |||||
| Brand • Model • Rev |
PRO-NETS WR850RL | ||||
| FCC ID | |||||
| Type |
wireless router | ||||
| CPU1 |
Ralink RT2880 | ||||
| CPU1 Type |
MIPS 4KEc | ||||
| CPU1 Speed |
266 MHz | ||||
| Flash1 Chip |
Brand? Model? | ||||
| Flash1 Size |
? MiB | ||||
| RAM1 Size |
? MiB | ||||
| RAM1 Chip |
Brand? Model? x 2 | ||||
| ETH chip1 |
Ralink RT2880 | ||||
| Switch |
IC+ IP175D | ||||
| Ethernet Port Count |
1-WAN 4-100MbE-LAN | ||||
| Wired Standard |
IEEE 802.3i/3u | ||||
|
802dot11 OUI: none specified | |||||
| Expansion IF types |
none specified | ||||
| Power |
12 VDC, 1 A | ||||
| Other | |||||
|
Default IP address: 192.168.1.1 | |||||
| Retail | |||||
| Availability | OEM,unknown | ||||
| FCC approval date | 30 November 2008 | ||||
| Radio 1 | |||||
| Chip1 |
Ralink RT2880 | ||||
| Chip2 |
Ralink RT2820 | ||||
| Wireless interface OUI |
none specified | ||||
| Antenna Connector Type |
U.FL | ||||
| MIMO status |
2x3:2 | ||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||
| 802.11n |
up to 300 Mbps | ||||
| 802.11g |
up to 54 Mbps | ||||
| 802.11b |
up to 11 Mbps | ||||
| WiFi Operating Frequency |
2.4 GHz | ||||
| |||||
For a list of all currently documented IC+ chipsets with specifications, see IC+.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented PRO-NETS device with specifications, see PRO-NETS.
- • 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class
Overview
"G1700717015130", "V1.3 REV: A" is silkscreened on the board.
The WR850RLD is identical to the WR850RL aside from the antenna configuration. The WR850RLD has two RP-SMA connectors (one connected to the internal U.FL connector) while the WR850RL has two integral antenna connected to the internal U.FL connectors. There is also a vertical type (WR850RLD only) with two RP-SMA connectors which are both on the same side. All models have two external and one internal antenna.
The default IP and credentials are based on the submitted manual in the FCC documents.
- PRO-NETS
- Embedded system/wireless router
- Embedded System Ralink
- Embedded System RT2880
- Ralink
- Embedded System MIPS 4KEc
- Embedded System
- Embedded System IC+
- Embedded System IP175D
- IC+
- Embedded System RT2820
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- English Documentation
