OvisLink AirLive WN-200R
From TechInfoDepot
Jump to navigationJump to searchbgn (N150) | |||||||
|---|---|---|---|---|---|---|---|
| Wireless b/g/n 150M Broadband Router | |||||||
| 3rd Party Firmware | |||||||
| dd-wrt | |||||||
| OpenWrt |
Incompatible | ||||||
| Tomato any flavor |
Incompatible | ||||||
| Platform | |||||||
| Brand • Model • Rev |
OvisLink WN-200R | ||||||
| FCC ID | |||||||
| Type |
wireless router | ||||||
| CPU1 |
Ralink RT3050 | ||||||
| CPU1 Type |
MIPS 24KEc | ||||||
| CPU1 Speed |
320 MHz 16-bit | ||||||
| Flash1 Chip |
Macronix MX29LV320DBTI-70G | ||||||
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||||
| RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> | ||||||
| RAM1 Chip |
EtronTech EM639165TS-6G | ||||||
| ETH chip1 |
Ralink RT3050 | ||||||
| Switch |
Ralink RT3050 | ||||||
| Ethernet Port Count |
1-WAN 4-100MbE-LAN | ||||||
| Wired Standard |
IEEE 802.3i/3u | ||||||
| Stock FW OS |
Linux 2.6.21 | ||||||
| Expansion IF types |
none specified | ||||||
| Power |
12 VDC, 1 A | ||||||
| Connector type |
barrel | ||||||
| Other | |||||||
|
Default SSID: airlive (7 addl. devices) | |||||||
| Manuf/OEM/ODM | |||||||
| Retail | |||||||
| FCC approval date | 21 January 2009 | ||||||
| Radio 1 | |||||||
| Chip1 |
Ralink RT3050 | ||||||
| Wireless interface OUI |
00:4F:74 | ||||||
| Antenna Connector Type |
RP-SMA | ||||||
| MIMO status |
1x1:1 | ||||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||||
| 802.11n |
up to 150 Mbps | ||||||
| 802.11g |
up to 54 Mbps | ||||||
| 802.11b |
up to 11 Mbps | ||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||
| |||||||
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
For a list of all currently documented OvisLink device with specifications, see OvisLink.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
"YN700C-1.0" is silkscreened on the board.
- This device would seem to be a SerComm IP1006SR. The FCC ID of the IP1006SR has been assigned to this entry (there is no FCC ID on the label).
Links of Interest
JTAG-Serial Info
Serial
| dmesg |
|---|
Linux version 2.6.21 (root@apbs) (gcc version 3.3.6) #8 Wed Nov 24 17:55:04 CST 2010
The CPU feqenuce set to 320 MHz
CPU revision is: 0001964c
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 0 pages used for memmap
Built 1 zonelists. Total pages: 4064
Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock3
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 16kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
cause = a0800064, status = 1100ff00
PID hash table entries: 64 (order: 6, 256 bytes)
calculating r4koff... 00138800(1280000)
CPU frequency 320.00 MHz
Using 160.000 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 13240k/16384k available (2246k kernel code, 3144k reserved, 445k data, 132k init, 0k highmem)
Calibrating delay loop... 212.99 BogoMIPS (lpj=425984)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
io scheduler noop registered (default)
FLASH_API: **********<<WARNING!!!!>>**************
FLASH_API: Flash Not Support(MAN_ID=C2 DEV_ID=22A8)
FLASH_API: ****************************************
Ralink gpio driver initialized
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550A
serial8250: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 16550A
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
ralink flash device: 0x1000000 at 0x1f000000
Ralink SoC physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Ralink SoC physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
Ralink SoC physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Ralink SoC physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 4 MTD partitions on "Ralink SoC physically mapped flash":
0x00000000-0x00030000 : "Bootloader"
0x00030000-0x00040000 : "Config "
0x00040000-0x00160000 : "Kernel"
0x00160000-0x00400000 : "rootfs"
GRE over IPv4 tunneling driver
ip_conntrack version 2.4 (128 buckets, 1024 max) - 232 bytes per conntrack
ip_conntrack_pptp version 3.1 loaded
ip_nat_pptp version 3.0 loaded
ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Linux
ipt_random match loaded
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 132k freed
Algorithmics/MIPS FPU Emulator v1.5
GDMA1_MAC_ADRH -- : 0x00000000
GDMA1_MAC_ADRL -- : 0x00000000
Ralink APSoC Ethernet Driver Initilization. v2.00 256 rx/tx descriptors allocated, mtu = 1500!
GDMA1_MAC_ADRH -- : 0x0000000c
GDMA1_MAC_ADRL -- : 0x432880cb
PROC INIT OK!
phy_tx_ring = 0x00846000, tx_ring = 0xa0846000
phy_rx_ring = 0x00000000, rx_ring = 0x00000000
RT305x_ESW: Link Status Changed
CDMA_CSG_CFG = 81000007
GDMA1_FWD_CFG = 710000
eth2.1: add 01:00:5e:00:00:01 mcast address to master interface
eth2.2: add 01:00:5e:00:00:01 mcast address to master interface
eth2.1: dev_set_promiscuity(master, 1)
device eth2 entered promiscuous mode
device eth2.1 entered promiscuous mode
eth2.1: del 01:00:5e:00:00:01 mcast address from vlan interface
eth2.1: del 01:00:5e:00:00:01 mcast address from master interface
eth2.1: Setting MAC address to 00 4f 74 31 74 e6.
eth2.1: add 01:00:5e:00:00:01 mcast address to master interface
br0: port 1(eth2.1) entering learning state
br0: topology change detected, propagating
br0: port 1(eth2.1) entering forwarding state
rt2860v2_ap: module license 'unspecified' taints kernel.
=== pAd = c0020000, size = 500232 ===
<-- RTMPAllocAdapterBlock, Status=0
RX DESC a04e7000 size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 9
2. Phy Mode = 9
FlashRead: 00040000 Out Of Scope
3. Phy Mode = 9
MCS Set = ff 00 00 00 01
Main bssid = 00:4f:74:31:74:e6
<==== rt28xx_init, Status=0
0x1300 = 00064380
device ra0 entered promiscuous mode
br0: port 2(ra0) entering learning state
br0: topology change detected, propagating
br0: port 2(ra0) entering forwarding state
Raul Debug receive RT_PRIV_IOCTL ... cmd = 0x753
|
| ps aux |
|---|
ps aux
PID Uid VmSize Stat Command
1 root 300 S init
2 root SWN [ksoftirqd/0]
3 root SW< [events/0]
4 root SW< [khelper]
5 root SW< [kthread]
6 root SW< [kblockd/0]
7 root SW< [kswapd0]
8 root SW [pdflush]
9 root SW [pdflush]
10 root SW< [aio/0]
11 root SW [mtdblockd]
55 root 280 S /sbin/klogd
117 root SW [RtmpCmdQTask]
118 root SW [RtmpWscTask]
126 root 488 S /usr/sbin/wscd -m 1 -a 192.168.1.254 -i ra0
129 root 488 S /usr/sbin/wscd -m 1 -a 192.168.1.254 -i ra0
130 root 488 S /usr/sbin/wscd -m 1 -a 192.168.1.254 -i ra0
131 root 488 S /usr/sbin/wscd -m 1 -a 192.168.1.254 -i ra0
138 root 488 S /usr/sbin/wscd -m 1 -a 192.168.1.254 -i ra0
140 root 488 S /usr/sbin/wscd -m 1 -a 192.168.1.254 -i ra0
141 root 488 S /usr/sbin/wscd -m 1 -a 192.168.1.254 -i ra0
142 root 488 S /usr/sbin/wscd -m 1 -a 192.168.1.254 -i ra0
150 root 488 S /usr/sbin/wscd -m 1 -a 192.168.1.254 -i ra0
151 root 488 S /usr/sbin/wscd -m 1 -a 192.168.1.254 -i ra0
160 root 268 S /usr/sbin/mini_httpd -d /usr/www -r WN-200R -c *.cgi
165 root 296 S /usr/sbin/udhcpd /etc/udhcpd.conf
172 root 260 S /usr/sbin/ntp -z GMT+8
179 root 280 S /usr/sbin/crond
181 root 124 S /usr/sbin/scfgmgr
184 root 168 S /usr/sbin/Wan_ctrl
185 root 124 S /usr/sbin/cmd_agent_ap
186 root 208 S /usr/sbin/wizd
189 root 280 S /sbin/syslogd -f /tmp/syslog.conf
203 root 204 S /usr/sbin/pbc_app
204 root 280 S /usr/sbin/led_ctrl
205 root 224 S /usr/sbin/download
279 root 712 S /usr/sbin/upnpd eth2.2 br0 30 4
283 root 196 S init
285 root 528 S /usr/sbin/pppoe-relay -C br0 -S eth2.2
286 root 712 S /usr/sbin/upnpd eth2.2 br0 30 4
287 root 712 S /usr/sbin/upnpd eth2.2 br0 30 4
289 root 712 S /usr/sbin/upnpd eth2.2 br0 30 4
291 root 712 S /usr/sbin/upnpd eth2.2 br0 30 4
292 root 712 S /usr/sbin/upnpd eth2.2 br0 30 4
335 root 712 S /usr/sbin/upnpd eth2.2 br0 30 4
365 root 192 S /usr/sbin/scfgmgr
1607 root 380 S sh -c ps aux
1608 root 332 R ps aux
|
cat /proc/mtd
cat /proc/mtd dev: size erasesize name mtd0: 00030000 00010000 "Bootloader" mtd1: 00010000 00010000 "Config " mtd2: 00120000 00010000 "Kernel" mtd3: 002a0000 00010000 "rootfs"
Pictures
- internal
board top
RAM
RF section
SerComm board ID
board labels
board top, PWR side, angled above
board top, front, angled above
board top, right side
capacitors, front
board top, left front side, angled above
board top, RF conn. side, angled above
board bottom
Flash
- external
back ports, cover off
RP-SMA connector
bottom
label
