Nexxt Solutions Viking 150 (ARN01154U4)
bgn (N150) | |||||
|---|---|---|---|---|---|
| 3G Wireless N Router | |||||
| 3rd Party Firmware | |||||
| dd-wrt | |||||
| OpenWrt |
Incompatible | ||||
| Tomato any flavor |
Incompatible | ||||
| Platform | |||||
| Brand • Model • Rev |
Nexxt Solutions Viking 150 | ||||
| Model Part Number |
ARN01154U4 | ||||
| FCC ID | |||||
| Type |
wireless router | ||||
| CPU1 | |||||
| CPU1 Type |
MIPS 24Kc | ||||
| CPU1 Speed |
400 MHz | ||||
| Flash1 Chip |
Brand? Model? | ||||
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> | ||||
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||
| RAM1 Chip |
SK hynix Model? | ||||
| ETH chip1 | |||||
| Switch | |||||
| Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN | ||||
| Wired Standard |
IEEE 802.3i/3u | ||||
|
802dot11 OUI: none specified | |||||
| Expansion IF types |
USB 2.0 | ||||
| USB ports |
1 | ||||
| USB Hub Compatible |
Untested | ||||
| Power |
9 VDC, 0.85 A | ||||
| Connector type |
barrel | ||||
|
Flags: 3G capable | |||||
| Other | |||||
|
Default SSID: Nexxt_XXXXXX (3 addl. devices) | |||||
| Manuf/OEM/ODM | |||||
| Retail | |||||
| FCC approval date | 24 June 2013 | ||||
| Country of manuf | China | ||||
| Radio 1 | |||||
| Chip1 | |||||
| Wireless interface OUI |
none specified | ||||
| Antenna Connector Type |
RP-SMA | ||||
| MIMO status |
1x1:1 | ||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||
| 802.11n |
up to 150 Mbps | ||||
| 802.11g |
up to 54 Mbps | ||||
| 802.11b |
up to 11 Mbps | ||||
| WiFi Operating Frequency |
2.4 GHz | ||||
| |||||
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Nexxt Solutions device with specifications, see Nexxt Solutions.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
"2050500217" and "Rev:1.0" is silkscreened on the board in the FCC photos.
The same text is found on:
Default settings (including the SSID) are per the FCC manual.
The power adapter shown in the FCC photos is a Vasata P090085-2B1
- (100-240VAC, 50/60Hz, 0.3A -> 9VDC, 0.85A).
