Netgear WPN824v2

From TechInfoDepot
Jump to navigationJump to search
multiple revisions of this device, use caution
bg (G54)
RangeMax Wireless Router
Netgear WPN824N-01.jpg
Support
Wikipedia
3rd Party Firmware
dd-wrt
OpenWrt
Incompatible
Tomato any flavor
Incompatible
Platform
BrandModelRev
Netgear WPN824 v2
FCC ID
IC ID
Type
wireless router
CPU1
CPU1 Type
MIPS 4KEc
CPU1 Speed
180 MHz
Flash1 Chip
Macronix MX25L1605AMC-15G
Flash1 Size
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Size
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br />
RAM1 Chip
Samsung K4S281632F-UC75
ETH chip1
Switch
Marvell 88E6060
Ethernet Port Count
1-100MbE-WAN
4-100MbE-LAN
Wired Standard
IEEE 802.3i/3u

802dot11 OUI: 00:14:6C (8 E, 18 W), 00:18:4D (10 E, 13 W), 00:1B:2F (5 E, 9 W), 00:1E:2A (9 E, 12 W)
Ethernet OUI: 00:14:6C (8 E, 18 W), 00:18:4D (10 E, 13 W), 00:1B:2F (5 E, 9 W), 00:1E:2A (9 E, 12 W)

Stock FW OS
VxWorks 5.4.2
Expansion IF types
none specified
Power
12 VDC, 1 A
Connector type
barrel
Serial Port (UART)
yes, internal, 12-pin header, unpopulated, 3.3V TTL, (9600 8N1)
JTAG Port
yes, pinout marked, test points
Other

Default SSID: NETGEAR (43 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1310 additional devices
of which 105 are Netgear devices
Default login user: admin
Default login password: password
admin:password credentials used by 420 additional devices
of which 301 are Netgear devices

Manuf/OEM/ODM
Foxconn U12H050
Retail
FCC approval date 03 November 2005
Country of manuf China
Radio 1
Chip1
Wireless interface OUI
00:14:6C, 00:18:4D, 00:1B:2F, 00:1E:2A
Antenna Connector Type
none specified
Wireless Standard
IEEE 802.11b/g
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
 FCC ID
Netgear WPN802v2PY305300021
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Netgear WPN824v1AtherosAtherosAtheros
Netgear WPN824v2AtherosAtheros
Netgear WPN824v3AtherosAtheros

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.

For a list of all currently documented Netgear device with specifications, see Netgear.

54 Mbps - 2.4GHz 802.11g = G54 class

Overview

Manuf. by Foxconn / Hon Hai / Ambit, model U12H050

Uses a smart antenna ('BeamFlex') system licenced from Video54 (now Ruckus Wireless).

See SmallNetBuilder (below) for more information

This model has a switch to turn off the blue LED sphere on top of the device.

Links of Interest

Reviews

JTAG-Serial Info

Serial

Serial Pinouts

                              1
    (GND) (RxD) ( • ) (TxD) ( • )
JP1 ( • ) ( • ) ( • ) ( • ) ( • )
                              2


Console login credentials

Info is per this this DSLReports thread..

Username: Gearguy
Password: Geardog

Info derived from

boot log
ar531xPlus rev 0x00000087 firmware startup...

Netgear WPN824v2 version 4.0.0.167
auto-booting...

Attaching to TFFS... done.
Loading /fl/APIMG1...
Decompressing... \  OK.
Starting at 0x80010000...

/fl/  - Volume is OK
Reading Configuration File "/fl/apcfg".
Configuration file checksum: 45d4b is good
v54_antinfo_init: 824v2: using max 3 of 7 = 63 states
v54_hwantctrl_init: 2316
Pinot+ Adaptive Control Algorithm, Copyright (C) 2003-2005, 
 Video54 Technologies, Inc. All Rights Reserved.
Attaching interface lo0...done

Adding 7498 symbols for standalone.
call usrAcosPPTPClientInit!
acosPPTPClientLibInit(): PPTP-v1.1.0, INIT OK!
-> wireless access point starting...
wlan0 Ready
Ready
DNS redirect INIT
in abRegisterInputHook inputPktHook: 800ccf08
Calling dnsRedirect_hookAdd
!Nat_PPTP_Initialize is called
Info: No FWPT default policies.
DHCPS: init dhcps: devname=mirror0
DHCPS:Set the default Lease Time to 86400
Set option ACOS_DHCP_OPT_ROUTER to 192.168.2.1:
Set option ACOS_DHCP_OPT_DNS_SERVER to 192.168.2.1:
Login: POT has reached the max value.
initial console help
U12H05000> ?

Commands are:

bridge         ddns           exit           ftpc           ip
lan            nat            passwd         pot            reboot
save           show           sntp           time           uptime
version        wan            web            windsh         wla

 '..'    return to previous directory
VxWorks shell help
-> help

help                           Print this list
ioHelp                         Print I/O utilities help info
dbgHelp                        Print debugger help info
nfsHelp                        Print nfs help info
netHelp                        Print network help info
spyHelp                        Print task histogrammer help info
timexHelp                      Print execution timer help info
h         [n]                  Print (or set) shell history
i         [task]               Summary of tasks' TCBs
ti        task                 Complete info on TCB for task
sp        adr,args...          Spawn a task, pri=100, opt=0, stk=20000
taskSpawn name,pri,opt,stk,adr,args... Spawn a task
td        task                 Delete a task
ts        task                 Suspend a task
tr        task                 Resume a task
d         [adr[,nunits[,width]]] Display memory
m         adr[,width]          Modify memory
mRegs     [reg[,task]]         Modify a task's registers interactively
pc        [task]               Return task's program counter

Type <CR> to continue, Q<CR> to stop:

iam       "user"[,"passwd"]     Set user name and passwd
whoami                         Print user name
devs                           List devices
ld        [syms[,noAbort][,"name"]] Load stdin, or file, into memory
                               (syms = add symbols to table:
                               -1 = none, 0 = globals, 1 = all)
lkup      ["substr"]         List symbols in system symbol table
lkAddr    address              List symbol table entries near address
checkStack  [task]             List task stack sizes and usage
printErrno  value              Print the name of a status value
period    secs,adr,args... Spawn task to call function periodically
repeat    n,adr,args...    Spawn task to call function n times (0=forever)
version                        Print VxWorks version info, and boot line

NOTE:  Arguments specifying 'task' can be either task ID or name.

value = 1 = 0x1
VxWorks version info
-> version
VxWorks (for Netgear WPN824v2) version VxWorks5.4.2.
Kernel: WIND version 2.5.
Made on Jan 13 2006, 13:50:55.
Atheros AP software info
U12H05000> wla

Atheros Access Point Rev 4.0.0.167
AP software 4.0.0.167
wlan0 -> ?
List of Access Point CLI commands:
 add remoteWbr                      -- Add a remote Wireless Bridge
 config wlan                        -- config wlanX
 connect bss                        -- connect to bssX
 del acl                            -- Delete Access Control List
 del key                            -- Delete Encryption key
 del remoteWbr                      -- Delete a remote Wireless Bridge
 find bss                           -- Find BSS
 find channel                       -- Find Available Channel
 find all                           -- Find All BSS
 format                             -- Format flash filesytem
 bootrom                            -- Update boot rom image
 ftp                                -- Software update via FTP
 get 11gonly                        -- Display 11g Only Allowed
 get 11goptimize                    -- Display 11g Optimization Level
 get 11goverlapbss                  -- Display Overlapping BSS Protection
 get abolt                          --
 get acl                            -- Display Access Control List
 get aging                          -- Display Aging Interval
 get antenna                        -- Display Antenna Diversity
 get association                    -- Display Association Table
 get authentication                 -- Display Authentication Type
 get autochannelselect              -- Display Auto Channel Select
 get beaconinterval                 -- Display Beacon Interval
 get burstSeqThreshold              -- Display Max Number of frames in a Burst
 get burstTime                      -- Display Burst Time
 get cacheperf                      -- Display the cache performance counters
 get calibration                    -- Display Noise And Offset Calibration Mode
 get cckTrigHigh                    -- Display Higher Trigger Threshold for CCK Phy Errors for ANI Control
 get cckTrigLow                     -- Display Lower Trigger Threshold for CCK Phy Errors for ANI Control
 get cckWeakSigThr                  -- Display ANI Parameter for CCK Weak Signal Detection Threshold
 get channel                        -- Display Radio Channel
 get cipher                         -- Display Encryption cipher
 get config                         -- Display Current AP Configuration
 get countrycode                    -- Display Country Code
 get ctsmode                        -- Display CTS mode
 get ctsrate                        -- Display CTS rate
 get ctstype                        -- Display CTS type
 get domainsuffix                   -- Display Domain Name Server suffix
 get dtim                           -- Display Data Beacon Rate (DTIM)
 get enableANI                      -- Display Adaptive Noise Immunity Control On/Off
 get encryption                     -- Display Encryption Mode
 get extendedchanmode               -- Display Extended Channel Mode
 get firStepLvl                     -- Display ANI Parameter for FirStepLevel
 get fragmentthreshold              -- Display Fragment Threshold
 get frequency                      -- Display Radio Frequency (MHz)
 get gateway                        -- Display Gateway IP Address
 get groupkeyupdate                 -- Display Group Key Update Interval (in Seconds)
 get hardware                       -- Display Hardware Revisions
 get hostipaddr                     -- Display Host IP Address
 get ipaddr                         -- Display IP Address
 get ipmask                         -- Display IP Subnet Mask
 get jsw                            -- Display Jumpstart Mode
 get jsP2PassPhrase                 -- Display JS-P2 passphrase
 get key                            -- Display Encryption Key
 get keyentrymethod                 -- Display Encyrption Key Entry Method
 get keysource                      -- Display Source Of Encryption Keys
 get login                          -- Display Login User Name
 get minimumrate                    -- Display Minimum Rate
 get nameaddr                       -- Display IP address of name server
 get noiseImmunityLvl               -- Display ANI Parameter for Noise Immunity Level
 get ofdmTrigHigh                   -- Display Higher Trigger Threshold for OFDM Phy Errors for ANI Control
 get ofdmTrigLow                    -- Display Lower Trigger Threshold for OFDM Phy Errors for ANI Control
 get ofdmWeakSigDet                 -- Display ANI Parameter for OFDM Weak Signal Detection
 get operationMode                  -- Display Operation Mode
 get pktLogEnable                   -- Display Packet Logging Mode
 get power                          -- Display Transmit Power Setting
 get radiusname                     -- Display RADIUS server name or IP address
 get radiusport                     -- Display RADIUS port number
 get rate                           -- Display Data Rate
 get reg                            -- Display the register contents at the given offset
 get remoteAp                       -- Display Remote Ap's Mac Address
 get reset                          -- Display # of resets
 get remoteWbr                      -- Display configured Remote Wireless bridges
 get hwtxretries                    -- Display HW Transmit Retry Limit
 get swtxretries                    -- Display SW Transmit Retry Limit
 get rtsthreshold                   -- Display RTS/CTS Threshold
 get shortpreamble                  -- Display Short Preamble Usage
 get shortslottime                  -- Display Short Slot Time Usage
 get softwareretry                  -- Display Software Retry
 get ssid                           -- Display Service Set ID
 get ssidsuppress                   -- Display SSID Suppress Mode
 get station                        -- Display Station Status
 get SuperG                         -- Display SuperG Feature Status
 get systemname                     -- Display Access Point System Name
 get updateparam                    -- Display Vendor Default Firmware Update Params
 get uptime                         -- Display UpTime
 get vlan                           -- Display VLAN Mode
 get watchdog                       -- Display Watchdog Mode
 get wds                            -- Display WDS Mode
 get wirelessmode                   -- Display Wireless LAN Mode
 get wmm                            -- Display WMM Mode
 get wmmParamBss                    -- Display WMM parameters used by STA in this BSS
 get wmmParam                       -- Display WMM parameters used by this AP
 get wlanstate                      -- Display wlan state
 get xrpoll                         -- Display XR poll
 get xrbss                          -- Display XR Bss Info
 get xrFragmentThreshold            -- Display XR fragment threshold
 help                               -- Display CLI Command List
 ping                               -- Ping
 pktLog                             -- Packet Log
 reboot                             -- Reboot Access Point
 run                                -- Run command file
 quit                               -- Logoff
 exit                               -- Logoff
 set 11gonly                        -- Set 11g Only Allowed
 set 11goptimize                    -- Set 11g Optimization Level
 set 11goverlapbss                  -- Set Overlapping BSS Protection
 set acl                            -- Set Access Control List
 set aging                          -- Set Aging Interval
 set antenna                        -- Set Antenna
 set authentication                 -- Set Authentication Type
 set autochannelselect              -- Set Auto Channel Selection
 set beaconinterval                 -- Modify Beacon Interval
 set burstSeqThreshold              -- Set Max Number of frames in a Burst
 set burstTime                      -- Set Burst Time
 set cachePerf                      -- Begin cache performance monitoring
 set calibration                    -- Set Calibration Period
 set channel                        -- Set Radio Channel
 set cipher                         -- Set Cipher
 set countrycode                    -- Set Country Code
 set ctsmode                        -- Set CTS Mode
 set ctsrate                        -- Set CTS Rate
 set ctstype                        -- Set CTS Type
 set domainsuffix                   -- Set Domain Name Server Suffix
 set dtim                           -- Set Data Beacon Rate (DTIM)
 set enableANI                      -- Turn Adaptive Noise Immunity Control On/Off
 set encryption                     -- Set Encryption Mode
 set extendedchanmode               -- Set Extended Channel Mode
 set factorydefault                 -- Restore to Default Factory Settings
 set firStepLvl                     -- Set ANI Parameter for FirStepLevel
 set fragmentthreshold              -- Set Fragment Threshold
 set frequency                      -- Set Radio Frequency (MHz)
 set gateway                        -- Set Gateway IP Address
 set groupkeyupdate                 -- Set Group Key Update Interval (in Seconds)
 set hostipaddr                     -- Set Host IP address
 set ipaddr                         -- Set IP Address
 set ipmask                         -- Set IP Subnet Mask
 set jsw                            -- Set Jumpstart Mode
 set jsp2Passwd                     -- Set JS-P2 password
 set key                            -- Set Encryption Key
 set keyentrymethod                 -- Select Encryption Key Entry Method
 set keysource                      -- Select Source Of Encryption Keys
 set login                          -- Modify Login User Name
 set minimumrate                    -- Set Minimum Rate
 set nameaddress                    -- Set Name Server IP address
 set noiseImmunityLvl               -- Set ANI Parameter for Noise Immunity Level
 set ofdmTrigHigh                   -- Set Higher Trigger Threshold for OFDM Phy Errors for ANI Control
 set ofdmTrigLow                    -- Set Lower Trigger Threshold for OFDM Phy Errors for ANI Control
 set ofdmWeakSigDet                 -- Set ANI Parameter for OFDM Weak Signal Detection
 set operationMode                  -- Set operation Mode
 set password                       -- Modify Password
 set passphrase                     -- Modify Passphrase
 set pktLogEnable                   -- Enable Packet Logging
 set power                          -- Set Transmit Power
 set radiusname                     -- Set RADIUS name or IP address
 set radiusport                     -- Set RADIUS port number
 set radiussecret                   -- Set RADIUS shared secret
 set rate                           -- Set Data Rate
 set reg                            -- Set Register Value
 set remoteAP                       -- Set Remote AP's Mac Address
 set hwtxretries                    -- Set HW Transmit Retry Limit
 set swtxretries                    -- Set SW Transmit Retry Limit
 set rtsthreshold                   -- Set RTS/CTS Threshold
 set shortpreamble                  -- Set Short Preamble
 set shortslottime                  -- Set Short Slot Time
 set softwareretry                  -- Set Software Retry
 set ssid                           -- Set Service Set ID
 set ssidsuppress                   -- Set SSID Suppress Mode
 set SuperG                         -- Super G Features
 set systemname                     -- Set Access Point System Name
 set updateparam                    -- Set Vendor Default Firmware Update Params
 set vlan                           -- Set VLAN Mode
 set watchdog                       -- Set Watchdog Mode
 set wds                            -- Set WDS Mode
 set wlanstate                      -- Set wlan state
 set wirelessmode                   -- Set Wireless LAN Mode
 set wmm                            -- Set WMM Mode
 set wmmParamBss                    -- Set WMM parameters used by STAs in this BSS
 set wmmParam                       -- Set WMM parameters used by this AP
 set xr                             -- Set XR
 v54 phy                            -- Print Phy error stats
 v54 queue                          -- Video54 Queuing Debug Info
 v54 reset                          -- Reset V54 TxCtrl State
 v54 staticant                      -- Configure a static antenna
 version                            -- Software version
wlan0 -> get hardware
wlan0 -> get hardware
wlan0 revisions: mac 11.0 phy 4.8 analog 7.0
  PCI Vendor ID: 0x168c, Device ID: 0x13
  Sub Vendor ID: 0x168c, Sub Device ID: 0x13
chip is AR5315
wlan0 -> version
AP software 4.0.0.167


Pictures

User Images