Netgear WGR614v9

multiple revisions of this device, use caution

bg (G54)
wireless router
Support	Support page
Wikipedia	Netgear
WikiDevi.wi-cat.ru	Netgear WGR614v9
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Incompatible
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Netgear WGR614 v9
FCC ID	PY306400057
IC ID	4054A-06400057
Type	wireless router
CPU1	Broadcom BCM5354
CPU1 Type	BMIPS3300
CPU1 Speed	240 MHz
Flash1 Chip	Macronix MX25L160SAMC-15G
Flash1 Size	2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br />
RAM1 Size	8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br />
RAM1 Chip	ICSI IC42S16400-7TG
ETH chip1	Broadcom BCM5354
Switch	Broadcom BCM5354
Ethernet Port Count	1-100MbE-WAN 4-100MbE-LAN
Wired Standard	IEEE 802.3/3u
802dot11 OUI: 00:1E:2A (9 E, 12 W), 00:1F:33 (8 E, 12 W), 00:22:3F (10 E, 12 W), 00:24:B2 (14 E, 16 W), 00:26:F2 (10 E, 10 W) Ethernet OUI: 00:1E:2A (9 E, 12 W), 00:1F:33 (8 E, 12 W), 00:22:3F (10 E, 12 W), 00:24:B2 (14 E, 16 W), 00:26:F2 (10 E, 10 W)
Stock bootloader	CFE vendor modified
Stock FW OS	Linux 2.4.20
Expansion IF types	none specified
Power	12 VDC, 1 A
Connector type	barrel
Serial Port (UART)	yes, internal, 6-pin header, (115200 8N1)
Other
Default SSID: NETGEAR (43 addl. devices) Default IP address: 192.168.1.1 the IP 192.168.1.1 is used by 1326 additional devices of which 107 are Netgear devices Default login user: admin Default login password: password admin:password credentials used by 425 additional devices of which 306 are Netgear devices
Manuf/OEM/ODM	Foxconn U12H094
Retail
FCC approval date	19 April 2007
Country of manuf	China
Radio 1
Chip1	Broadcom BCM5354
Wireless interface OUI	00:1E:2A, 00:1F:33, 00:22:3F, 00:24:B2, 00:26:F2
Antenna Connector Type	none specified
Wireless Standard	IEEE 802.11b/g
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
Radio cor_rev	13
FCC ID Netgear WGR614L PY306400057 Netgear WGR614v8 PY306400057
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand Netgear WGR614L Broadcom Broadcom Netgear WGR614v1 Brecis Intersil Intersil Netgear WGR614v10 Broadcom Broadcom Netgear WGR614v2 Atheros Atheros Atheros Netgear WGR614v3 Atheros Atheros Atheros Netgear WGR614v4 Marvell Marvell Marvell Netgear WGR614v5 Broadcom Broadcom Broadcom Netgear WGR614v6 Broadcom Broadcom Broadcom Netgear WGR614v7 Atheros Atheros Netgear WGR614v8 Broadcom Broadcom Netgear WGR614v9 Broadcom Broadcom

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Netgear device with specifications, see Netgear.

• 54 Mbps - 2.4GHz 802.11g = G54 class

Overview

"U12H072", "700026", and "REV. 0 GP" is silkscreened on the main boards (v8).

• A Foxconn label affixed to the board noted the model v9 as U12H094

(U12H094T00 or U12H094T21).

• Netgear WGR614v9 on AlephNull

Board ID: U12H094T00_NETGEAR HDR0

Per the manual, the default SSID is NETGEAR.

Links of Interest

Forum threads

• On the DD-WRT forums (w/ high-res board shots)
• On the DD-WRT forums again

JTAG-Serial Info

Serial

Serial Pinouts

(GND) (TxD) (...) (...) (RxD) (...) <- Pin 1
                                  JP1

Info derived from

boot log

CFE for WGR614v9 version: 2.6 Build Date: Tue Apr 7 17:43:44 CST 2009 et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.138.1.0 Device eth0: hwaddr 00-24-B2-AA-E9-84, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set Loading ....................... CPU revision is: 00029029 Primary instruction cache 16kb, linesize 16 bytes (4 ways) Primary data cache 16kb, linesize 16 bytes (2 ways) Linux version 2.4.20 (zacker@svn) (gcc version 3.2.3 with Broadcom modifications) #1 Thu Jan 8 11:49:51 CST 2009 Setting the PFC to its default value Determined physical RAM map: memory: 00800000 @ 00000000 (usable) User-defined physical RAM map: memory: 00800000 @ 00000000 (usable) On node 0 totalpages: 2048 zone(0): 2048 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200 mem=8M CPU: BCM5354 rev 3 at 240 MHz Calibrating delay loop... 237.56 BogoMIPS Memory: 6536k/8192k available (1217k kernel code, 1656k reserved, 104k data, 56k init, 0k highmem) Dentry cache hash table entries: 1024 (order: 1, 8192 bytes) Inode cache hash table entries: 512 (order: 0, 4096 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 2048 (order: 1, 8192 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX PCI: no core PCI: Fixing up bus 0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xb8000300 (irq = 3) is a 16550A ttyS01 at 0xb8000400 (irq = 0) is a 16550A PPP generic driver version 2.4.2 sflash: squashfs filesystem found at block 573 Creating 6 MTD partitions on "sflash": 0x00000000-0x00020000 : "boot" 0x00020000-0x001fa000 : "linux" 0x0008f7e4-0x001fa000 : "rootfs" 0x001fa000-0x001fb000 : "POT" 0x001fb000-0x001fc000 : "board_data" 0x001fc000-0x00200000 : "nvram" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 512 bind 1024) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 56k freed Reading board data... pa0maxpwr - 82 pa0b0 - 0x164B pa0b1 - 0xFA66 pa0b2 - 0xFE86 opo - 8 configure RF parameters OK Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o insmod: bcm57xx.o: no module by that name found Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o Hit enter to continue...Reading board data... Using /lib/modules/2.4.20/kernel/net/ipv4/acos_nat/acos_nat.o Info: No FWPT default policies. info, udhcp server (v0.9.8) started error, unable to parse 'option wins ' error, unable to parse 'option domain ' POT integrity check OK. POT time is up. Start DHCP client daemon Hit enter to continue...Hit enter to continue...info, udhcp client (v0.9.8) started eth0: No such process