Netgear WAG102
From TechInfoDepot
Jump to navigationJump to searchabg (AG108) | |
---|---|
ProSafe 802.11a/g Dual Band Wireless Access Point | |
![]() | |
Support | |
Wikipedia | |
InfoDepot Wiki | |
WikiDevi.wi-cat.ru | |
3rd Party Firmware | |
dd-wrt | |
OpenWrt |
Incompatible |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Netgear WAG102 |
FCC ID | |
Type |
access point |
CPU1 ![]() |
Atheros AR5312A |
CPU1 Type |
MIPS R4000 |
CPU1 Speed |
220 MHz |
Flash1 Chip |
Macronix MX29LV320CBTC-70G |
Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Chip |
EtronTech EM639165TS-6G |
ETH chip1 |
Atheros AR5312A |
ETH chip2 |
Realtek RTL8201CP |
Ethernet Port Count |
1-100MbE-LAN |
Wired Standard |
IEEE 802.3i/3u |
Stock FW OS |
VxWorks |
Expansion IF types |
none specified |
Power |
12 VDC, 1 A |
Connector type |
barrel |
Serial Port (UART) |
yes |
JTAG Port |
yes |
Other | |
Default IP address: 192.168.0.232 | |
Manuf/OEM/ODM | |
3rd Party Firmware Support | |
Retail | |
FCC approval date | 06 December 2005 |
ASIN |
B007W5NMSI ![]() |
Radio 1 | |
Chip1 |
Atheros AR5312A |
Chip2 |
Atheros AR5112 |
Wireless interface OUI |
00:18:4D |
Antenna Connector Type |
U.FL, RP-SMA |
Wireless Standard |
IEEE 802.11a |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
Radio 2 | |
Chip1 |
Atheros AR5312A |
Chip2 |
Atheros AR2112 |
Wireless interface OUI |
00:18:4D |
Antenna Connector Type |
U.FL, RP-SMA |
Wireless Standard |
IEEE 802.11b/g |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented Netgear device with specifications, see Netgear.
Overview
The manual states the default SSIDs are NETGEAR-11a and NETGEAR-11g.
Links of Interest
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
- Netgear WAG 102 On the DD-WRT Wiki
JTAG-Serial Info
Serial
Serial Pinouts
Serial Pinout: TXD | 3,3V | RXD | GND
Baudrate 9600/8/n/1 (Original-Firmware) 115200/8/n/1 (Redboot/DD-WRT)
Pictures
Categories:
- Netgear
- Embedded system/access point
- Embedded System Atheros
- Embedded System AR5312A
- Atheros
- Embedded System MIPS R4000
- Embedded System
- Embedded System RTL8201CP
- Embedded System Realtek
- Realtek
- Manuf SerComm
- DD-WRT Supported
- Embedded System AR5112
- Embedded System IEEE 802.11a
- Embedded System AR2112
- Embedded System IEEE 802.11b/g
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- English Documentation