Netgear RP614v4
From TechInfoDepot
Jump to navigationJump to search| Cable/DSL Web Safe Router | |||||||||||||||||||||
| Support | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wikipedia | |||||||||||||||||||||
| WikiDevi.wi-cat.ru | |||||||||||||||||||||
| 3rd Party Firmware | |||||||||||||||||||||
| dd-wrt | |||||||||||||||||||||
| OpenWrt |
Incompatible | ||||||||||||||||||||
| Tomato any flavor |
Incompatible | ||||||||||||||||||||
| Platform | |||||||||||||||||||||
| Brand • Model • Rev |
Netgear RP614 v4 | ||||||||||||||||||||
| Type |
router | ||||||||||||||||||||
| Series |
RP614 | ||||||||||||||||||||
| CPU1 |
Realtek RTL8650B | ||||||||||||||||||||
| CPU1 Type |
Lexra RLX5280 | ||||||||||||||||||||
| CPU1 Speed |
200 MHz | ||||||||||||||||||||
| Flash1 Chip |
Macronix MX29LV160CBTC-90G | ||||||||||||||||||||
| Flash1 Size |
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> | ||||||||||||||||||||
| RAM1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||||||||||||||||||
| RAM1 Chip |
EtronTech EM638165TS-7G | ||||||||||||||||||||
| ETH chip1 |
Realtek RTL8650B | ||||||||||||||||||||
| Switch |
Realtek RTL8650B | ||||||||||||||||||||
| Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN | ||||||||||||||||||||
| Wired Standard |
IEEE 802.3i/3u | ||||||||||||||||||||
| Stock bootloader |
ROME vendor modified | ||||||||||||||||||||
| Stock FW OS |
μClinux 2.4.26-uc0 | ||||||||||||||||||||
| Expansion IF types |
none specified | ||||||||||||||||||||
| Power |
5 VDC, 1 A | ||||||||||||||||||||
| Serial Port (UART) |
yes, internal, test points, (38400 8N1) | ||||||||||||||||||||
| Other | |||||||||||||||||||||
|
Default IP address: 192.168.1.1 | |||||||||||||||||||||
| Manuf/OEM/ODM | |||||||||||||||||||||
| Retail | |||||||||||||||||||||
| (Est.) release date | April 2006 | ||||||||||||||||||||
| Country of manuf | China | ||||||||||||||||||||
| |||||||||||||||||||||
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
For a list of all currently documented Netgear device with specifications, see Netgear.
Overview
"2976259401" is silkscreened on the board used to populate this entry.
- nichicon [VZ(M)] and Chemi-Con capacitors are in use on the board.
Links of Interest
- Datasheet (dated April 2006)
JTAG-Serial Info
Serial
Serial Pinouts
The test points directly in front of the RTL8650B are the UART pins. These are in between the 3rd and 4th led's on the front of the board. (In between I and 1)
TP2 = TxD, TP3 = RxD
Info derived from
| boot log |
|---|
!@#$^&*()-+|abcdefghijklmnopqrstuvwxyz. (c)Copyright Delta Networks, Inc. 2005 RP614V4 Wire Router LOADER Version 1.00.09(uClinux) (Oct 25 2007 17:36:07) [865xB] CPU Clock Rate: 200MHz, Memory Clock Rate: 130MHz Detected flash size: total 2MB. SDRAM size: 8MB +TFTP +Force UART0 +Bank1:ROM +LZMA POT Client Start POT Client End FirstAid Start FirstAid End --== Loader Menu ==-- 'r' to update run image 'a' to change config 'l' to update loader 'g' to load run image without updating Flash Loading runtime image ... Unzip image from address: 0xbe020000 Start LZMA Decompression: Start runtime image at 80000400. ************************************ Powered by Realtek RTL865xB SoC, rev 3 ************************************ SDRAM size: 8MB CPU revision is: 0000ff00 Init MMU (16 entries) Primary instruction cache 0kB, linesize 0 bytes. Primary data cache 0kB, linesize 0 bytes. Linux version 2.4.26-uc0 (lucas@DRV_term.SWII.DNI) (gcc version 3.2) #31 Wed Apr 23 17:09:29 CST 2008 Can't analyze prologue code at 8000b524 Determined physical RAM map: memory: 00800000 @ 00000000 (usable) NOFS reserved @ 0x80233f80 On node 0 totalpages: 2048 zone(0): 2048 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock4 IRR(0)=c0000000 Calibrating delay loop... 199.06 BogoMIPS Memory: 5840k/8192k available (1876k kernel code, 2352k reserved, 100k data, 92k init, 0k highmem) Dentry cache hash table entries: 1024 (order: 1, 8192 bytes) Inode cache hash table entries: 512 (order: 0, 4096 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 2048 (order: 1, 8192 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX NEW PCI Driver...isLinuxCompliantEndianMode=False(Big Endian) [PCI] Reset Bridge ..... Finish! No PCI device exist!! Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher LZMA decompressor support based on LZMA SDK 4.05 by Oleg I.Vdovikin pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SERIAL_PCI enabled Probing RTL8651 home gateway controller... Initialize RTL865x ASIC and driver chip name: 865xB, chip revid: 3 Initialize mbuf... creating default 2 interfaces...eth0 IRR(6)=c0040000 ===> Request IRQ 6 for eth0, ret=0 IRR(7)=c0070000 ===> Request IRQ 7 for eth0, ret=0 eth1 ...OK PPP generic driver version 2.4.2 flash device: 200000 at be000000 Amd/Fujitsu Extended Query Table v1.0 at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling fast programming due to code brokenness. Creating 6 MTD partitions on "Physically mapped flash": 0x00000000-0x00004000 : "boot1" 0x00010000-0x00020000 : "boot2" 0x001f0000-0x00200000 : "boot3" 0x00020000-0x000d0000 : "kernel" 0x000d0000-0x00220000 : "rootfs" mtd: partition "rootfs" extends beyond the end of device "Physically mapped flash" -- size truncated to 0x130000 0x00004000-0x00010000 : "bdinfo" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 512 bind 1024) GRE over IPv4 tunneling driver ip_conntrack version 2.1 (64 buckets, 512 max) - 192 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 92k freed IRR(4)=c0c70000 ===> Request IRQ 4 for serial, ret=0 Shell invoked to run file: /etc/rc Command: mount -t proc proc /proc Command: mount -t ramfs ramfs /var Command: mkdir /var/tmp Command: mkdir /var/ppp/ Command: mkdir /var/log Command: mkdir /var/run Command: mkdir /var/lock Command: #mkdir /var/hotplug Command: #mkdir /var/hotplug/pci Command: #mkdir /var/hotplug/usb Command: #cp /etc/hotplug2/* /var/hotplug/ Command: mkdir /var/spool Command: mkdir /var/spool/cron Command: mkdir /var/spool/cron/crontabs Command: Command: #iwcontrol is required for RTL8185 Wireless driver Command: #busybox insmod /lib/modules/2.4.26-uc0/kernel/drivers/net/wireless/rtl8185.o Command: #iwcontrol auth & Command: Command: #busybox insmod /lib/modules/2.4.26-uc0/kernel/drivers/usb/quickcam.o Command: #busybox insmod /etc/webcam_tp6800.o Command: /bin/boa -c /etc & [16] Command: /bin/getdeviceinfo & [17] Command: Command: #mount -t usbdevfs none /proc/bus/usb Command: Command: # Airgo Command: /etc/airgo.cfg /etc/airgo.cfg: Bad command or file name Command: Execution Finished, Exiting done START TIMER 0 do_timer::do_timer_times:0 IDLE Sash command shell (version 1.1.1) /> FLASH_BASE_REAL=0xbe000000 __flash_base=0x2ac35000 __crmr_addr=0x2aaaf104 __wdtcnr_addr=0x2aab003c arrtl8651_user_pid set to 16 gv[1] = -c Systemchip name: 865xB, chip revid: 3 initializing... fd open error get loader_version = VER:1.00.09 set loader_version = 1.00.09 urlfilter_tableDriverdel rtl8651_flushUrlFilterTrustedUser... IDLE PPPoE Passthru disabled. Drop Unknown PPPoE PADT disabled. IPv6 Passthru disabled. IPX Passthru disabled. NETBIOS Passthru disabled. set "eth1" mac to --> 00:22:3f:07:83:b0 Rx shift=10002 set "eth0" mac to --> 00:14:2a:49:c9:54 cfg wan to dhcp client ... Set IGMP Default Upstream interface (eth0) ... SUCCESS!! info, client (v0 .Set IGMP Default Upstream interface 9(eth0) ... .SUCCESS!! 9-pre) started ret:remoteMgmt_tableDriverAccess() : rtl8651_addProtoStackActions for icmp 1000 FLASH_BASE_REAL=0xbe000000 __flash_base=0x2ac35000 __crmr_addr=0x2aaaf104 __wdtcnr_addr=0x2aab003c argv[1] = deconfig dhcpc client deconfig WAN Setting.... ifCfgParam[0].ipAddr: 0.0.0.0 ifCfgParam[0].ipMask: 0.0.0.0 ifCfgParam[0].gwAddr: 0.0.0.0 ifCfgParam[0].dnsPrimaryAddr: 0.0.0.0 ifCfgParam[0].dnsSecondaryAddr: 0.0.0.0 rtl8651_delNaptMapping: ret -6 rtl8651_delRoute(default): ret -3 rtl8651_delIpIntf: ret -2710 killall: udhcpd: no process killed killall: dnrd: no process killed info, server (v0.9.9-pre) started error, max_leases value (254) not sane, setting to 253 instead error, Unable to open /var/udhcpd.leases for reading [30] set UDP 53 acl rule from Lan Port dnrd uses obsolete (PF_INET,SOCK_PACKET) device eth1 entered promiscuous mode Setting interface ::: eth1 ::: to promisc killall: upnp: no process killed SIOCDELRT: No such process initialising master DNS database 12 records in master DNS database killall: upnp: no process killed upnp enter main, lanif[eth1], wan_if[eth0] killall: httphijack: no process killed del TCP 80 acl rule from Lan Port acl_tableDriverAccess: rtl8651a_addAclRule(if:eth0) ret:-3 calling upnp_main, ssdp_refresh_period:1800 IDLE upnp_main::global_ssdp_refresh:1800, upnp_refresh:1799 start_CheckWan Done sysInit Done |
cat /proc/cpuinfo
/> cat /proc/cpuinfo system type : Philips Nino processor : 0 cpu model : R3000 V0.0 BogoMIPS : 199.06 wait instruction : no microsecond timers : no tlb_entries : 16 extra interrupt vector : no hardware watchpoint : no VCED exceptions : not available VCEI exceptions : not available
ps aux
/> ps aux
PID Uid VmSize Stat Command
1 root 5568 S /sbin/init
2 root SW [keventd]
3 root SWN [ksoftirqd_CPU0]
4 root SW [kswapd]
5 root SW [bdflush]
6 root SW [kupdated]
16 root 14208 S /bin/boa -c /etc
17 root 3712 S /bin/getdeviceinfo
19 root 3776 S /bin/sh
23 root 4544 S /bin/udhcpc -s /bin/udhcpchook -H RP614v4
27 root 4416 S /bin/udhcpd
30 root 7104 S /bin/dnrd -t 5
37 root 6656 S /bin/upnp -D -L eth1 -W eth0 -T 1800
39 root 4544 S /bin/CheckWan
61 root 4352 R ps aux
cat /proc/meminfo + free
/> cat /proc/meminfo
total: used: free: shared: buffers: cached:
Mem: 6074368 5652480 421888 0 528384 1896448
Swap: 0 0 0
MemTotal: 5932 kB
MemFree: 412 kB
MemShared: 0 kB
Buffers: 516 kB
Cached: 1852 kB
SwapCached: 0 kB
Active: 1148 kB
Inactive: 2072 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 5932 kB
LowFree: 412 kB
SwapTotal: 0 kB
SwapFree: 0 kB
/> free
total used free shared buffers
Mem: 5932 5512 420 0 516
Swap: 0 0 0
Total: 5932 5512 420
