Netgear R7300DST
From TechInfoDepot
Jump to navigationJump to searchabgn+ac (AC1900) | |
---|---|
AC1900 Nighthawk DST Router & DST Adapter | |
Homepage | |
Support | |
Wikipedia | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt |
Status Unknown |
Tomato any flavor |
Status Unknown |
Platform | |
Brand • Model • Rev |
Netgear R7300DST |
FCC ID | |
IC ID | |
Type |
wireless router, Powerline Access Point |
CPU1 | |
CPU1 Type |
ARMv7 Cortex-A9 |
CPU1 Speed |
1.0 GHz ( 2 cores ) |
CPU2 |
Broadcom BCM60335 |
Flash1 Chip |
Spansion S34ML01G200TFI00 |
Flash1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
RAM1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
RAM1 Chip |
Samsung K4B2G1646Q-BCK0 |
ETH chip1 | |
ETH chip2 |
Broadcom BCM54612E |
Switch | |
Ethernet Port Count |
1-WAN 4-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Stock bootloader |
CFE |
Stock FW OS |
Linux |
Expansion IF types |
USB 3.0, USB 2.0 |
USB ports |
2 |
USB Hub Compatible |
Untested |
Power |
100-240 VAC ~ 50/60 Hz, 1.3 A |
Connector type |
AC (direct) |
Serial Port (UART) |
yes, internal, 4-pin header, 3.3V TTL |
Flags: HomePlug AV2, SISO | |
Additional chips | |
Other | |
Default IP address: http://www.routerlogin.net | |
Manuf/OEM/ODM |
Foxconn U12H270 T00 |
Retail | |
FCC approval date | 19 August 2015 |
ASIN | B01HB56E5G |
Country of manuf | China |
Radio 1 | |
Chip1 |
Broadcom BCM4360 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
U.FL, RP-SMA |
MIMO status |
3x3:3 |
Wireless Standard |
IEEE 802.11a/n/ac |
802.11ac |
up to 1300 Mbps |
802.11n |
up to 450 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5 GHz |
Radio cor_rev |
40 |
Radio 2 | |
Chip1 |
Broadcom BCM4360 |
Wireless interface OUI |
none specified |
Antenna Connector Type |
U.FL, RP-SMA |
MIMO status |
3x3:3 |
Wireless Standard |
IEEE 802.11b/g/n |
N-QAM |
up to 600 Mbps |
802.11n |
up to 450 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.4 GHz |
Radio cor_rev |
40 |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Netgear device with specifications, see Netgear.
Overview
Dead Spot Terminator - 802.11ac Dual Band Gigabit
"PLC_MOUDULE_NETGEAR_60335" is silkscreened on the PLC PCB in the FCC photos.
- The device is presumed to use a Broadcom BCM60335 as the HomePlug controller.
Links of Interest
Reviews
- "U12H270T00", "801466", "REV.1 GP" is silkscreened on the board (Foxconn)
- The device is using BCM4709A + 2x BCM4360 + BCM54612E (SW GbE PLC),
- 3x SE2623L PAMs for the 2.4GHz radio, 3x SE5003L1 PAMs for the 5GHz radio
See also
- Netgear R7000 - Similar router-only model
- Netgear DST6501 - Add-on powerline access point
Categories:
- Netgear
- Embedded system/wireless router
- Embedded system/Powerline Access Point
- Embedded System Broadcom
- Embedded System BCM4709A0
- Broadcom
- Embedded System ARMv7
- Embedded System Cortex-A9
- Embedded System BCM60335
- Embedded System BCM54612E
- Manuf Foxconn
- Embedded System BCM4360
- Has Mimo Status
- Embedded System IEEE 802.11a/n/ac
- Embedded System IEEE 802.11b/g/n
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation