NanoPi R1

multiple revisions of this device, use caution

bgn (N150)
Single-board Computer
Homepage	Product page
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Supported
Tomato any flavor	Incompatible
Gargoyle	Status Unknown
Platform
Brand • Model • Rev	FriendlyARM NanoPi R1(1GB) v1.0
FCC ID	none specified
Type	single-board computer
CPU1	Allwinner H3
CPU1 Type	ARM Cortex-A7
CPU1 Speed	1.2 GHz ( 4 cores )
Flash1 Chip	Samsung KLM8G1GETF-B041
Flash1 Size	8 GiB 8,192 MiB <br />8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br /> (eMMC)
RAM1 Size	? MiB (DDR3 SDRAM)
RAM1 Chip	Samsung K4B4G1646E-BCMA x 2
ETH chip1	Allwinner H3
ETH chip2	Realtek RTL8211E
Switch	Realtek RTL8152B
Ethernet Port Count	1-100MbE-WAN 1-1GbE-LAN
Wired Standard	IEEE 802.3i/3u
802dot11 OUI: 8C:F7:10 (-, 2 W) Ethernet OUI: 02:81:78, 7A:E8:F8
Stock bootloader	U-Boot 2017.11
Stock FW OS	Linux 4.14.42 OpenWrt 18.06.1
Expansion IF types	USB 2.0, MicroSD Card slot
USB ports	2
SD/MMC Slots	1
USB Hub Compatible	Untested
Power	5 VDC, 2 A
Connector type	USB Female Micro-B
Serial Port (UART)	yes, 3-pin header, populated, 3.3V TTL, (115200 8N1)
Flags: Bluetooth 4.0 LE, UART, MicroSD Card slot
Additional chips 300mA CMOS LDO Regulator;Richtek;RT9193;;1; 2A, 1MHz Synchronous Step-Down Regulator;Silergy;SY8089;;1; 1A, 1.5MHz PWM Step-Down DC/DC Converter;Richtek;RT8059;;2; 3A, 1.2MHz Synchronous Step-Down Switcher;MPS;MP2143;;1; 3-pin Microprocessor Reset Circuit;On Semi;NCP803;;1; 4 Channel ESD Suppressor Diode;TI;TPD4E05U06;;4;
Other
Default SSID: OpenWrt (1 addl. devices) Default IP address: acquired via DHCP the IP acquired via DHCP is used by 212 additional devices of which 13 are FriendlyARM devices Default login user: root Default login password: blank root:blank credentials used by 72 additional devices of which 5 are FriendlyARM devices
3rd Party Firmware Support	OpenWrt • (List | Dev | DLs) , DietPi, IPFire
Retail
(Est.) release date	February 2019
(Est.) initial retail price (in USD):	$39
Country of manuf	China
Radio 1
Radio1 module	AMPAK AP6212
Radio1 module IF	SDIO (module)
Chip1	Broadcom BCM43430
Wireless interface OUI	8C:F7:10
Antenna Connector Type	SMA
MIMO status	1x1:1
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 150 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz
CPU1 brand Radio1 chip1 brand Radio1 chip2 brand NanoPi R1 Allwinner Broadcom NanoPi R1S-H3 Allwinner Realtek NanoPi R1S-H5 Allwinner Realtek

For a list of all currently documented Allwinner SoC's with specifications, see Allwinner.
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented FriendlyARM device with specifications, see FriendlyARM.

• 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class

Overview

See also: NanoPi series and List of Single-board computers

Hardware specification

• CPU: Allwinner H3 (Quad-core ARM Cortex-A7) @1.2GHz
• GPU: Mali-400MP2 @600MHz
• Memory: 512MB/1GB (DDR3) SDRAM
• Onboard Storage: 8GB (eMMC)
• WLAN: 802.11b/g/n (1T1R) Wi-Fi, Bluetooth 4.0

AMPAK AP6212 (Broadcom BCM43430)

• Ports: 1x GbE LAN, 1x FE WAN, 2x USB 2.0

Links of Interest

• NanoPi R1 on FriendlyARM Wiki
• Tiny, $29 IoT gateway SBC packs in WiFi and dual LAN ports on LinuxGizmos
• NanoPi R1 is an Allwinner H3 Gateway with Dual Ethernet on CNX|Software

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
OpenWrt Target: sunxi
OpenWrt Subtarget: cortexa7
OpenWrt Package architecture: arm_cortex-a7_neon-vfpv4
Support started version: 21.02.0
Current supported version: 23.05.5

Please insert instructions here

Pictures

User Images

• 

  Board Top

• 

  Board Bottom