MeiG SLT866 4G

From TechInfoDepot
Jump to navigationJump to search
abgn+ac (AC1200)
access point, CPE
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Tomato any flavor
Incompatible
Gargoyle
Status Unknown
Platform
BrandModelRev
MeiG SLT866 4G
FCC ID
Type
access point, CPE
CPU1
CPU1 Type
MIPS 1004Kc
CPU1 Speed
880 MHz ( 2 cores ) 16-bit
Flash1 Chip
Brand? Model?
Flash1 Size
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br />
RAM1 Size
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br />
RAM1 Chip
Brand? Model?
ETH chip1
Switch
Ethernet Port Count
1-1GbE-WAN
1-1GbE-LAN
Wired Standard
IEEE 802.3i/3u/3ab

802dot11 OUI: none specified

Expansion IF types
sim Slot, USB
SIM Card slot
1
Power
12 VDC, ? A
Connector type
barrel
Other

Default SSID: 4G-CPE-2.4G-XXXX
, 4G-CPE-5G-XXXX
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1324 additional devices
of which 0 are MeiG devices

3rd Party Firmware Support
OpenWrt • (List | Dev | DLs)
Radio 1
Chip1
MediaTek MT7603BE
Wireless interface OUI
none specified
Antenna Connector Type
none specified
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz
Radio 2
Chip1
MediaTek MT7613BE
Wireless interface OUI
none specified
Antenna Connector Type
none specified
MIMO status
2x2:2
Wireless Standard
IEEE 802.11a/n/ac
802.11ac
up to 867 Mbps
802.11n
up to 300 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
5 GHz

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.),
300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AC1200 class

Flashing

Flashing OpenWrt

On the OpenWrt ToH (techdata entry)
OpenWrt Target: ramips
OpenWrt Subtarget: mt7621
OpenWrt Package architecture: mipsel_24kc
Support started version: 23.05.2
Current supported version: 23.05.5
Unsupported Functions:
Si32185 SLIC
Comment:
3G/4G Modem: MEIG SLM828
(currently only supported with ModemManager)

Please insert instructions here