Marvell Armada A385 DB AP
From TechInfoDepot
Jump to navigationJump to searchSingle Board Computer | |
3rd Party Firmware | |
---|---|
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Marvell Armada A385 DB AP |
Type |
single-board computer |
CPU1 |
Marvell 88F6820 |
CPU1 Speed |
not specified ( 2 cores ) |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (NAND) |
Flash2 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
RAM1 Size |
2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
Brand? Model? |
Ethernet Port Count |
3-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
| |
Stock bootloader |
U-Boot |
Expansion IF types |
Mini PCI, USB 2.0, USB 3.0 |
Mini PCI slots |
3 |
USB ports |
2 |
USB Hub Compatible |
Untested |
Other | |
| |
3rd Party Firmware Support |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Marvell device with specifications, see Marvell.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
On the OpenWrt ToH (techdata entry)
OpenWrt Target: mvebu
OpenWrt Subtarget: cortexa9
OpenWrt Package architecture: arm_cortex-a9_vfpv3
Support started version: 15.05
Current supported version: 23.05.5
OpenWrt Target: mvebu
OpenWrt Subtarget: cortexa9
OpenWrt Package architecture: arm_cortex-a9_vfpv3
Support started version: 15.05
Current supported version: 23.05.5
Please insert instructions here