Linksys WRH54G
From TechInfoDepot
Jump to navigationJump to searchbg (G54) | |
|---|---|
| Wireless-G Home Router | |
 | |
| Support | |
| Wikipedia | |
| InfoDepot Wiki | |
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt | |
| OpenWrt |
Incompatible |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Incompatible |
| Platform | |
| Brand • Model • Rev |
Linksys WRH54G |
| FCC ID | |
| Type |
wireless router |
| CPU1 | |
| CPU1 Type |
BMIPS3300 |
| CPU1 Speed |
240 MHz |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> |
| RAM1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 | |
| Switch | |
| Ethernet Port Count |
1-100MbE-WAN 4-100MbE-LAN |
| Wired Standard |
IEEE 802.3i/3u |
|
802dot11 OUI: none specified | |
| Expansion IF types |
none specified |
| Power |
12 VDC, 0.5 A |
| Connector type |
barrel |
| Serial Port (UART) |
yes |
| JTAG Port |
yes |
| Other | |
|
| |
| Manuf/OEM/ODM | |
| 3rd Party Firmware Support | |
| Retail | |
| FCC approval date | 09 February 2007 |
| UPC |
745883582129 (UPC DB, On eBay) |
| ASIN |
B000XDQK2G  |
| Radio 1 | |
| Chip1 | |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
RP-TNC |
| Wireless Standard |
IEEE 802.11b/g |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
| Radio cor_rev |
13 |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Linksys device with specifications, see Linksys.
- • 54 Mbps - 2.4GHz 802.11g = G54 class
Overview
"3763-14141304R" is silkscreened on the board.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing dd-wrt
Supported by dd-wrt as of = v24 micro rc7 - 9063
Thanks to Eko for getting the device supported.
Special thanks to a9988cd for donation, Tornado and redhawk0 for all the work and testing.
Don't use this image on any other router - for WRH54G only !
Linksys WRH54G is now supported by dd-wrt. No need to replace cfe, but you alwayays need to use special firmware built for wrh54g only. Even for later GUI upgrades.
- Restore to defaults
- Open upgrade page, select dd-wrt.v24-12548_WRH54G_micro.bin (or other special wrh image)
- Upgrade
- When it comes back, be sure to press reset button for 5 s to restore dd-wrt's factory defaults
- that's it ***
Reverting
Reverting dd-wrt
- Download WRH54G firmware from Linksys
- Restore to defaults
- Open upgrade page, select the firmware
- Upgrade
- When it comes back, be sure to press reset button for 5 s to restore Linksys's factory defaults
- that's it ***
