Linksys E2500 v1

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1323 additional devices
of which 155 are Linksys devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 278 additional devices
of which 135 are Linksys devices

Manuf/OEM/ODM

CyberTAN

3rd Party Firmware Support

DD-WRT • (List)
, OpenWrt • (List | Dev | DLs)
, Tomato (Shibby) • (List | DLs)
, TomatoUSB RAF (Victek) • (List | DLs)
, Tomato (Hyzoom) • (Tomato (Shibby) mod)

Retail

Availability

End of Life

FCC approval date

04 March 2011

(Est.) release date

04 April 2011

UPC

745883592371
(UPC DB, On eBay)

ASIN

B004T9RR4A

Country of manuf

China

Radio 1

Chip1

Broadcom BCM5358UB0

Wireless interface OUI

20:AA:4B, 58:6D:8F, C0:C1:C0

Antenna Connector Type

none specified

MIMO status

2x2:2

Wireless Standard

IEEE 802.11b/g/n

802.11n

up to 300 Mbps

802.11g

up to 54 Mbps

802.11b

up to 11 Mbps

WiFi Operating Frequency

2.4 GHz

Radio cor_rev

Radio 2

Chip1

Broadcom BCM43236

Wireless interface OUI

20:AA:4B, 58:6D:8F, C0:C1:C0

Antenna Connector Type

U.FL

MIMO status

2x2:2

Wireless Standard

IEEE 802.11a/n

802.11n

up to 300 Mbps

802.11a

up to 54 Mbps

WiFi Operating Frequency

5 GHz

Radio cor_rev

	CPU1 brand	Radio1 chip1 brand	Radio2 chip1 brand
Linksys E2500 v1	Broadcom	Broadcom	Broadcom
Linksys E2500 v2	Broadcom	Broadcom	Broadcom
Linksys E2500 v3	Broadcom	Broadcom	Broadcom
Linksys E2500 v4	MediaTek	MediaTek	MediaTek

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

For a list of all currently documented Linksys device with specifications, see Linksys.

• 300 Mbps - 2SS 5GHz 802.11n (40MHz chan.),

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = AN600 class

Overview

The Linksys E2500 was a router released by Linksys around April 2011. It features a Broadcom BCM43236 dual-band wireless chip. It has 4, 10/100 ethernet ports, and a single 10/100 WAN port.

Links of Interest

Reviewed on SmallNetBuilder

"3763-30000302R" or "3763-30000303R" is silkscreened on the board.

Linksys/Cisco E2500 for DD-WRT On the DD-WRT forums
New Linksys Router (E1200; E1500; E2500; E3200) On the DD-WRT forums
On the DD-WRT forums

C0:C1:C0 OUI and 300MHz CPU in the boot log

The E2500v1 would appear to be experimentally supported by Shibby's Tomato RT-N builds.

The E2500v1 is [1] supported. Victek RAF versions.

Flashing

NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power.

Flashing dd-wrt

On the DDWRT Wiki
Support started version: K26 build 18946 20120407
Current supported version: ?
Comment:
K26 build 18946 20120407 no 5 GHz

Please insert instructions here

Flashing OpenWrt

This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.

DO NOT BUY DEVICES WITH 8MB FLASH / 64MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 8/64 warning for details.

This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation.

This means that you will not be able to install many packages, and that you might experience crashes due to OOM situations more or less often. See OpenWrt on 8/64 devices what you can do now.

Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when choosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details.

On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: bcm47xx
OpenWrt Subtarget: mips74k
OpenWrt Package architecture: mipsel_74kc
Support started version: 15.05
Current supported version: 23.05.5
Unsupported Functions:
WiFi 2.4GHz, WiFi 5GHz

Please insert instructions here