Keyence NE-W01E
From TechInfoDepot
Jump to navigationJump to searchb (B11) | |
|---|---|
| access point | |
| 3rd Party Firmware | |
| dd-wrt | |
| OpenWrt |
Incompatible |
| Tomato any flavor |
Incompatible |
| Platform | |
| Brand • Model • Rev |
Keyence NE-W01E |
| FCC ID | |
| Type |
access point |
| CPU1 |
Ubicom IP2022 |
| CPU1 Type |
Ubicom 32 |
| CPU1 Speed |
not specified |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
? MiB |
| RAM1 Size |
? MiB |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
Ubicom IP2022 |
| Ethernet Port Count |
1-10MbE-LAN |
| Wired Standard |
IEEE 802.3i |
| Expansion IF types |
PCMCIA (16-bit) |
| PCMCIA slots |
1 |
| Power |
100-240 VAC ~ 50/60 Hz, ? A |
| Connector type |
power leads only |
| Other | |
|
Default SSID: KeyenceWLAN | |
| Retail | |
| Availability | unreleased? |
| FCC approval date | 30 September 2003 |
| Radio 1 | |
| Radio1 module |
unknown |
| Radio1 module IF |
PCMCIA (16-bit) |
| Chip1 |
Brand? Model? |
| Wireless interface OUI |
00:01:FC |
| Antenna Connector Type |
RP-SMA |
| Wireless Standard |
IEEE 802.11b |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Ubicom SoC's with specifications, see Ubicom.
- • 11 Mbps - 2.4GHz 802.11b = B11 class
Overview
There is no view of the wireless module's internals within the FCC filing. It does, however, appear to be a Z-Com card.
Default settings used in this entry are per the FCC manual.
Per one of the FCC EUT's MAC labels, a 00:01:FC (Keyence) OUI is presumed to be used for both interfaces.
- There are about 50 uses of a 00:01:FC OUI within WiGLE as of 2013-11-05.
