Inteno XG6846
From TechInfoDepot
Jump to navigationJump to searchBroadband Switch | |
![]() | |
3rd Party Firmware | |
---|---|
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Status Unknown |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Inteno XG6846 |
CPU1 |
Broadcom BCM6328 |
CPU1 Type |
BMIPS4350 |
CPU1 Speed |
320 MHz |
Flash1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (NOR) |
RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (DDR) |
ETH chip1 |
Broadcom BCM6328 |
Switch |
Marvell MV88E6352 |
Ethernet Port Count |
5-1GbE |
Ethernet connector |
8P8C |
Wired Standard |
IEEE 802.3i/3u/3ab |
Auto-MDIX |
unspecified |
Switch Class |
managed |
Ethernet OUI: none specified | |
Expansion IF types |
SFP |
SFP ports |
1 |
Stock bootloader |
CFE |
Power |
12 VDC, 1 A |
Serial Port (UART) |
yes, 3.3, 115200 / 8N1 |
| |
3rd Party Firmware Support |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
Flashing
![]() | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
![]() | The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
![]() | Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Forum
OpenWrt Target: bmips
OpenWrt Subtarget: bcm6328
OpenWrt Package architecture: mips_mips32
Support started version: ?
Current supported version: snapshot
On the OpenWrt Forum
OpenWrt Target: bmips
OpenWrt Subtarget: bcm6328
OpenWrt Package architecture: mips_mips32
Support started version: ?
Current supported version: snapshot
Please insert instructions here