Hame 3G Wi-Fi Router (MPR-A1)
From TechInfoDepot
Jump to navigationJump to searchbgn (N150) | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| wireless router | |||||||||||||
| 3rd Party Firmware | |||||||||||||
| dd-wrt |
Status Unknown | ||||||||||||
| OpenWrt | |||||||||||||
| Tomato any flavor |
Incompatible | ||||||||||||
| Gargoyle |
Status Unknown | ||||||||||||
| Platform | |||||||||||||
| Brand • Model • Rev |
Hame MPR-A1 | ||||||||||||
| FCC ID | |||||||||||||
| Type |
wireless router | ||||||||||||
| CPU1 |
Ralink RT5350 | ||||||||||||
| CPU1 Type |
MIPS 24KEc | ||||||||||||
| CPU1 Speed |
360 MHz | ||||||||||||
| Flash1 Chip |
Brand? Model? | ||||||||||||
| Flash1 Size |
? MiB | ||||||||||||
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> | ||||||||||||
| RAM1 Chip |
EtronTech EM63A165TS-6G | ||||||||||||
| ETH chip1 |
Ralink RT5350 | ||||||||||||
| Ethernet Port Count |
1-100MbE-LAN | ||||||||||||
| Wired Standard |
IEEE 802.3i/3u | ||||||||||||
| Expansion IF types |
none specified | ||||||||||||
| Power |
5 VDC, 1.2 A | ||||||||||||
| Connector type |
USB Female Mini-B | ||||||||||||
|
Flags: 3G capable, battery, portable | |||||||||||||
| Other | |||||||||||||
|
Default SSID: HAME_A1_XXXX | |||||||||||||
| 3rd Party Firmware Support | |||||||||||||
| Retail | |||||||||||||
| Availability | End of Life | ||||||||||||
| FCC approval date | 06 March 2013 | ||||||||||||
| ASIN |
B008XD4BL0  | ||||||||||||
| Country of manuf | China | ||||||||||||
| Radio 1 | |||||||||||||
| Chip1 |
Ralink RT5350 | ||||||||||||
| Wireless interface OUI |
9C:41:7C | ||||||||||||
| Antenna Connector Type |
none specified | ||||||||||||
| MIMO status |
1x1:1 | ||||||||||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||
| 802.11n |
up to 150 Mbps | ||||||||||||
| 802.11g |
up to 54 Mbps | ||||||||||||
| 802.11b |
up to 11 Mbps | ||||||||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||||||||
| |||||||||||||
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
- • 150 Mbps - 1SS 2.4GHz 802.11n (40MHz chan.) = N150 class
Overview
"MS-ME198407", "A1-V2.0+", and "A1-V2.1" is silkscreened on the multiple board types in the FCC photos.
The FCC test report states that this FCC ID applies to the A1, A1+, A1B, A1S, A1W, A2, A2B, A2S, and A2W.
Default settings are per the FCC manual.
- The default SSID for the device is shown to be HAME_A1_XXXX. There are a fair number of entries for this SSID in WiGLE (generally / exclusively with 9C:41:7C OUIs).
- The FCC manual also includes a list of compatibility tested 3G dongles.
Flashing
 | NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
 | This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram. DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details. |
| This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation. This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now. |
| OpenWrt support for this device has ended in 2022. 19.07.10 was the last official build for 4/32 devices. |
On the OpenWrt ToH (techdata entry)
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 14.07
Current supported version: 19.07.10
Comment:
Image build disabled in master with commit d7d46da938e3
Image too big: snapshot
On the OpenWrt Wiki
On the OpenWrt Forum
OpenWrt Target: ramips
OpenWrt Subtarget: rt305x
OpenWrt Package architecture: mipsel_24kc
Support started version: 14.07
Current supported version: 19.07.10
Comment:
Image build disabled in master with commit d7d46da938e3
Image too big: snapshot
Please insert instructions here
