Edimax BR-6479Gn

bgn (N300)
N300 Wireless Gigabit Router
3rd Party Firmware
dd-wrt	Status Unknown
OpenWrt	Status Unknown
Tomato any flavor	Incompatible
Platform
Brand • Model • Rev	Edimax BR-6479Gn
FCC ID	NDD9564791214
Type	wireless router
CPU1	Realtek RTL8197D
CPU1 Type	Lexra RLX5281
CPU1 Speed	not specified
Flash1 Chip	Brand? Model?
Flash1 Size	? MiB
RAM1 Size	? MiB
RAM1 Chip	Brand? Model?
ETH chip1	Realtek RTL8197D
Switch	Realtek Model?
Ethernet Port Count	1-WAN 4-1GbE-LAN
Wired Standard	IEEE 802.3i/3u/3ab
802dot11 OUI: none specified
Expansion IF types	none specified
Power	5 VDC, 2 A
Connector type	barrel
Other
Default SSID: edimax.setup (4 addl. devices) Default IP address: 192.168.2.1 the IP 192.168.2.1 is used by 297 additional devices of which 58 are Edimax devices Default login user: admin Default login password: 1234 admin:1234 credentials used by 185 additional devices of which 73 are Edimax devices
Manuf/OEM/ODM	Edimax
Retail
FCC approval date	24 May 2013
Radio 1
Chip1	Realtek RTL8192CE
Wireless interface OUI	none specified
Antenna Connector Type	RP-SMA
MIMO status	2x2:2
Wireless Standard	IEEE 802.11b/g/n
802.11n	up to 300 Mbps
802.11g	up to 54 Mbps
802.11b	up to 11 Mbps
WiFi Operating Frequency	2.4 GHz

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

For a list of all currently documented Edimax device with specifications, see Edimax.

• 300 Mbps - 2SS 2.4GHz 802.11n (40MHz chan.) = N300 class

Overview

"1244-010000892-50Z" is silkscreened on the board in the FCC photos.

This is the same board P/N as the Edimax BR-6478AC.

The power adapter specified as used in the FCC test report is a DVE DSA-12PFA-05 FUS 050200 (100-240VAC ~ 50/60 Hz, 0.5A -> 5VDC 2A).