Edge-corE EAP111
From TechInfoDepot
Jump to navigationJump to searchabgn+ac+ax (AX1800) | |
---|---|
Wi-Fi 6 Indoor/Outdoor Access Point | |
Homepage | |
3rd Party Firmware | |
dd-wrt |
Status Unknown |
OpenWrt | |
Tomato any flavor |
Incompatible |
Gargoyle |
Status Unknown |
Platform | |
Brand • Model • Rev |
Edge-corE EAP111 |
FCC ID | |
Type |
access point |
CPU1 |
MediaTek MT7981A |
CPU1 Speed |
1.3 GHz ( 2 cores ) |
Flash1 Chip |
Brand? Model? |
Flash1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (SPI-NAND) |
RAM1 Size |
512 MiB536,870,912 B <br />4,194,304 Kib <br />524,288 KiB <br />4,096 Mib <br />0.5 GiB <br /> |
RAM1 Chip |
Brand? Model? |
ETH chip1 |
MediaTek MT7981A |
ETH chip2 |
Airoha EN8801SC |
Ethernet Port Count |
2-1GbE-LAN |
Wired Standard |
IEEE 802.3i/3u/3ab |
802dot11 OUI: none specified | |
Stock bootloader |
U-Boot |
Expansion IF types |
none specified |
PoE |
802.3at, standard |
Power |
12 VDC, 2 A |
Connector type |
barrel |
Flags: BLE, Zigbee | |
Other | |
| |
3rd Party Firmware Support | |
Radio 1 | |
Chip1 |
MediaTek MT7976CN |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
2x2:2 |
Wireless Standard |
IEEE 802.11b/g/n/ax |
802.11ax |
up to 574 Mbps |
802.11n |
up to 300 Mbps |
802.11g |
up to 54 Mbps |
802.11b |
up to 11 Mbps |
WiFi Operating Frequency |
2.401 – 2.483 GHz |
Radio 2 | |
Chip1 |
MediaTek MT7976CN |
Wireless interface OUI |
none specified |
Antenna Connector Type |
none specified |
MIMO status |
3x3:2 |
Wireless Standard |
IEEE 802.11a/n/ac/ax |
802.11ax |
up to 1201 Mbps |
802.11ac |
up to 867 Mbps |
802.11n |
up to 300 Mbps |
802.11a |
up to 54 Mbps |
WiFi Operating Frequency |
5.170 – 5.835 GHz |
For a list of all currently documented Airoha (EcoNet) chipsets with specifications, see Airoha.
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
For a list of all currently documented Edge-corE device with specifications, see Edge-corE.
Flashing
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Flashing OpenWrt
The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile. |
Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI |
On the OpenWrt ToH (techdata entry)
OpenWrt Target: MediaTek
OpenWrt Subtarget: filogic
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: ?
Current supported version: snapshot
Comment:
Airoha EN8801SC for 2nd Phy
OpenWrt Target: MediaTek
OpenWrt Subtarget: filogic
OpenWrt Package architecture: aarch64_cortex-a53
Support started version: ?
Current supported version: snapshot
Comment:
Airoha EN8801SC for 2nd Phy
Please insert instructions here
Categories:
- Edge-corE
- Embedded system/access point
- Embedded System MediaTek
- Embedded System MT7981A
- MediaTek
- Embedded System EN8801SC
- Embedded System Airoha
- Airoha
- OpenWrt Supported
- Embedded System MT7976CN
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n/ax
- Embedded System IEEE 802.11a/n/ac/ax
- Dual-Radio Wireless Embedded System
- Wireless Embedded System
- Dual-Band
- Embedded System
- English Documentation